APR BRAKE COOLING DUCTS | SUBARU BRZ 2013 - 2016 SKU: CF-812050

Excessive heat can cause major and expensive damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. 

APR Air Ducts help bring fresh cooling air to different areas that need additional cooling. Built using pre-preg. carbon fibre reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Air Ducts add both function and "lightness" where it counts.

The APR Brake Cooling Ducts are aerodynamically optimized to "funnel in" massive amounts of air. Also known as the venturi effect, when the vehicle speed increases, this funnelled-in air increases in both pressure and velocity as it passes from the larger frontal area into the smaller pipe section of the brake duct. 

When matched with appropriate high-temperature air duct hoses (not included - purchase hoses from your favourite racing-supply shop), the APR Brake Cooling Ducts will help to channel in large volumes of fresh air to help cool down red-hot brake rotors lap after lap on the track.

Carbon Fiber Construction
This component is formed in the autoclave at high temperatures using pre-pregnated carbon fibre manufacturing processes, for high strength and low weight.

UV Resistant Coating
Each Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).

APR BRAKE COOLING DUCTS | SUBARU BRZ 2013 - 2016 SKU: CF-812050

 

BMW | M3 F80 | M4 F82/F83 | REAR SWAY BAR 26MM 3 POINT ADJUSTABLE SKU: BBR44Z

Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. 

By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. 

This Whiteline 26mm 3 point adjustable sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. 

In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort. 

BMW M SERIES 2014-ON - M4 F82, F83

BMW M SERIES 2014-2019 - M3 F80

BMW | M3 F80 | M4 F82/F83 | REAR SWAY BAR 26MM 3 POINT ADJUSTABLE SKU: BBR44Z

 

2017-2023 Alfa Romeo Giulia Duraflex Gervana Front Fenders - 2 Pieces SKU: K2-7792-ALF-114-OFR

The Duraflex Gervana Front Fenders (SKU: 118770) are designed to enhance the aesthetics and aerodynamics of the 2017–2023 Alfa Romeo Giulia. 

This two-piece set offers a blend of style and performance, making it a popular choice among enthusiasts.

Key Features:

• Material: Constructed from a proprietary blend of fiberglass, plastic, and flex resins, known as FRP (Fiberglass Reinforced Plastics), these fenders offer increased durability and flexibility compared to standard fiberglass components. 
• Finish: Comes in a black primer finish, ready for paint customization to match your vehicle’s color scheme. 
• Design: Features an aerodynamic profile that may improve downforce and stability at higher speeds. 
• Weight: The lightweight construction helps maintain the vehicle’s agility and responsiveness. 
• Durability: The Duraflex technology reduces shipping damages by up to 75% compared to average fiberglass products. 

Installation Notes:

• Professional Installation Recommended: Due to the nature of FRP materials, professional installation is advised. The fenders may require sanding, trimming, and filling prior to painting and installation. 
• Hardware: Mounting hardware is not included; installers will need to source appropriate fasteners and possibly custom brackets to ensure a secure fit. 

2017-2023 Alfa Romeo Giulia Duraflex Gervana Front Fenders - 2 Pieces SKU: K2-7792-ALF-114-OFR

 

Skunk2 Alpha Series BRZ / FRS Connecting Rods SKU: SKK306-12-1010 

The Skunk2 Alpha Series Connecting Rods are engineered for high-performance applications in the FA20 engine, found in the Subaru BRZ, Scion FR-S, and Toyota 86. 

These rods are designed to handle the demands of forced induction and high-revving naturally aspirated setups, making them ideal for enthusiasts aiming to exceed 900 horsepower . 

Key Advantages:

• Exceptional Strength and Durability: Forged from high-quality 4340 chromoly steel, these rods undergo comprehensive heat treatment, tempering, and shot-peening processes. This results in a robust structure capable of withstanding extreme stress and high RPMs . 

• Optimized H-Beam Design: Utilizing Finite Element Analysis (FEA), Skunk2’s engineers developed a straight H-beam configuration that distributes stress evenly across the rod. This design enhances strength without adding unnecessary weight, contributing to the rods’ ability to handle over 900 horsepower . 

• Enhanced Lubrication: Each rod features dual oil passages at the pin ends, ensuring consistent lubrication and cooling of the wrist pins. This design reduces friction and wear, promoting longevity under high-performance conditions . 

• High-Quality Fasteners: Equipped with 3/8-inch ARP2000 bolts rated at over 220,000 psi, these rods offer reliable clamping force, essential for maintaining integrity under extreme loads . 

• Precision and Compatibility: Each rod is balanced to within ±1 gram and includes bronze wrist pin bushings, ensuring compatibility with most aftermarket pistons without additional machining . 

Specifications:

• Center-to-Center Length: 129.39 mm

• Big End Bore: 53 mm

• Big End Width: 21.41 mm

• Pin End Bore: 22 mm

• Pin End Width: 21.41 mm

• Weight: Approximately 527 grams per rod   

Applications:

• 2013–2019 Subaru BRZ (2.0L FA20D)

• 2013–2016 Scion FR-S (2.0L 4U-GSE)

• 2017–2019 Toyota 86 (2.0L 4U-GSE)

• 2014–2018 Subaru Forester XT (2.0L FA20)

• 2015–2020 Subaru WRX (2.0L FA20) 

Skunk2 Alpha Series BRZ / FRS Connecting Rods SKU: SKK306-12-1010 

 

Skunk2 Pro-Series 88-01 Honda B-Series/H23 DOHC 1.6/1.7/1.8/2.0/2.3L Cam Gears (Black Series) SKU: SKK304-05-5205

The Skunk2 Pro-Series Adjustable Cam Gears (Black Series) for 1988–2001 Honda B-Series and H23 DOHC engines offer several advantages for performance enthusiasts:

1. Precise Camshaft Timing Adjustment:

• Allows fine-tuning of camshaft timing by ±10 degrees in 1-degree increments, enabling optimization of horsepower and torque across the RPM range. 

2. Lightweight Construction:

• Crafted from CNC-machined 7075-T6 billet aluminum, these cam gears are approximately 35% lighter than OEM counterparts, reducing rotational inertia for improved engine response and acceleration. 

3. Durable and Reliable Design:

• Features hard-anodized teeth to minimize premature wear.
• Incorporates a robust six-bolt design to prevent gear slippage, ensuring consistent performance even under extreme conditions. 

4. Easy Installation and Adjustment:

• Equipped with laser-etched timing and directional marks, facilitating quick and accurate camshaft adjustments. 

5. Proven Performance:

• Tested and validated on race cars over more than a decade, demonstrating reliability and effectiveness in high-performance applications. 

6. Broad Compatibility:

• Compatible with a range of Honda and Acura models equipped with B-Series and H23A1 engines, including:
  
• 1990–2001 Acura Integra (GS, GS-R, LS, RS, Type R)
• 1999–2000 Honda Civic Si
• 1994–1997 Honda Civic del Sol VTEC
• 1992–1996 Honda Prelude Si 

For enthusiasts seeking to maximize engine performance through precise camshaft timing adjustments, the Skunk2 Pro-Series Adjustable Cam Gears (Black Series) present a reliable and effective solution. 

Skunk2 Pro-Series 88-01 Honda B-Series/H23 DOHC 1.6/1.7/1.8/2.0/2.3L Cam Gears (Black Series) SKU: SKK304-05-5205

 

DeatschWerks Chevy LS1/LS6 / 85-04 Ford Mustang GT Bosch EV14 1200cc Injectors (Set of 8)

The DeatschWerks 1200cc Bosch EV14 Injectors (Set of 8) are high-performance fuel injectors designed for various applications, including:

• Chevrolet LS1/LS6 engines (e.g., Camaro Z28/SS 1998–2002, Corvette LS1 1997–2004, Z06 LS6 2001–2004) 
• Ford Mustang GT models from 1985 to 2004
• Pontiac Firebird Formula/Trans Am LS1 1998–2002 
• 2004 Pontiac GTO LS1 
• Ford F-Series trucks (1997–2004)
• Ford SVT Lightning (1999–2004) 
• Cadillac CTS-V (2004–2005)

Key Features:

• Flow Rate: 1200 cc/min 
• Connector Type: Minitimer with extended nozzle 
• Utilizes Bosch EV14 technology, known for reliability and performance 
• Stainless steel internals compatible with various fuels, including E85, methanol, and MTBE-oxygenated fuels 
• Flow-matched to within 1–2% for consistent performance 
• Includes a flow report for each set 
• Backed by a 3-year comprehensive warranty 

DeatschWerks Chevy LS1/LS6 / 85-04 Ford Mustang GT Bosch EV14 1200cc Injectors (Set of 8)

 

S55 Titanium Front Mount Air Intake Kit - BMW F80 M3, F82/F83 M4, & F87 M2C

1. Titanium Construction: Crafted from high-quality titanium materials, the front mount air intake kit ensures durability and strength while minimizing weight, enhancing overall performance and responsiveness.
2. Optimized Airflow: Engineered to maximize airflow to the engine, the kit improves engine breathing, resulting in increased horsepower and torque for a more exhilarating driving experience.
3. Precision Fitment: Designed specifically for BMW F80 M3, F82/F83 M4, and F87 M2C models, the kit offers precise fitment, ensuring seamless integration with existing components and a hassle-free installation process.
4. Enhanced Aesthetics: With its sleek titanium finish, the front mount air intake kit adds a touch of visual appeal under the hood, elevating the engine bay aesthetics and complementing the vehicle's sporty exterior design.

 

S55 Titanium Front Mount Air Intake Kit - BMW F80 M3, F82/F83 M4, & F87 M2C

 

XClutch 08-09 Audi A3 Sportback 2.0L Stage 1 Sprung Organic Clutch Kit SKU: XCLXKVW24698-1A

XClutch performance upgrades have been engineered to provide the ultimate touch in clutch performance. 

Utilising the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between driveability and performance for different vehicle applications. 

The pivot point and diaphragm design are carefully analysed to ensure positive pedal feel and increased clamping force.

Fits:

2015-2019, 2022-2024 Volkswagen Golf R Base

2015-2018 Volkswagen GTI Autobahn

2015-2016, 2018 Volkswagen GTIS

2015-2018,2022 2024 Volkswagen GTISE

2017 Volkswagen GTISport

2019 Volkswagen JettaGLI 35th Anniversary Edition

2019-2022 Volkswagen JettaGLI Autobahn

2019-2021 VolkswagenJettaGLI S

XClutch 08-09 Audi A3 Sportback 2.0L Stage 1 Sprung Organic Clutch Kit SKU: XCLXKVW24698-1A

 

TWINTERCOOLER FOR VW MK6 GOLF R SKU: FMINTGOLR

Due to some unique space constraints of the MK6 Golf R platform, this kit has a unique core, which is slightly thinner than Forge other cores, but it is also wider and taller, giving it overall more surface area for heat dissipation. 

The end tanks and mounting brackets are also unique to this application. Before and after Dyno testing quickly showed the significant gains of this intercooler were achieved in the upper range, whilst on road testing highlighted the reduction in inlet temperatures . 

Those involved could not believe how well this intercooler worked so well in combination with the performance software upgrade, with the engine continuing to pull hard where it had previously felt as if the power flattened off.

This installation is similar to all our other intercoolers for the transverse FSI and TSI VAG engines with the addition of a second front mounted core in a parallel configuration to the existing OEM front mount. 

This provides for the greatest possible cooling efficiency with the least negative side effects and least modification to the vehicle for installation. 

This particular kit is completely unique to the Golf R application, sharing no other parts with any other TWINtercooler kit that Forge had offered.

TWINTERCOOLER FOR VW MK6 GOLF R SKU: FMINTGOLR

 

Skunk2 Tuner Series Honda/Acura K20A/ A2/ Z1/ Z3 & K24A2 DOHC i-VTEC 2.0L Stage 2 Cam Shafts SKU: SKK305-05-0225

Gain an extra 19-22 hp and retain your factory idle and low-speed emissions with Skunk2's Tuner Series Stage 2 Camshafts, Skunk2 premier line of high-performance camshafts for Honda's K20A2-based, K-series engines. 

Tuner Series Stage 2 Camshafts are designed to optimize horsepower and torque on engines featuring free-flowing intake and exhaust tracts, increased compression, and upgraded valvetrain and are the result of Skunk2's years' worth of drag racing and road racing efforts. 

No other line of high-performance camshafts even comes close to Skunk2's Tuner Series. Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing. 

By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire powerband. 

Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance. Each camshaft is manufactured from high-strength, hollow, iron-alloy cores featuring cutting-edge profiles that emphasize an exceptional idle and low emissions. 

All Skunk2 camshafts are ground to exact specifications using state-of-the-art CNC cam grinding machines equipped with cubic-boron grinding wheels and feature hardened, wear-resistant lobes and surfaces. 

Skunk2's Tuner Series Camshafts for K20A2-based, K-series engines also feature Fast Ramp and AMAX profile technology, which increases overall performance and results in unmatched response from idle to redline. 

AMAX technology simply maximizes the area under the lift curve but without compromising reliability or valvetrain stability. Skunk2's profiles feature more duration than competitors' at lifts above 1mm, resulting in greater efficiency and more power. 

And thanks to Fast Ramp, the same technology used in Formula One racing, seat timing is reduced, which results in additional cylinder pressure and more torque but without compromising valvetrain longevity.

Skunk2 Tuner Series Honda/Acura K20A/ A2/ Z1/ Z3 & K24A2 DOHC i-VTEC 2.0L Stage 2 Cam Shafts SKU: SKK305-05-0225