RACING FACTORY YAMAMOTO STAINLESS MESH CLUTCH LINE FOR HONDA S2000 AP2 RACING-FACTORY-YAMAMOTO-00146

 

RACING FACTORY YAMAMOTO STAINLESS MESH CLUTCH LINE FOR HONDA S2000 AP2 RACING-FACTORY-YAMAMOTO-00146

1. This is Racing Factory Yamamoto Stainless Mesh Clutch Liner for Honda S2000.

2. Braking performance was improved by replacing the genuine rubber clutch line that connects the clutch release cylinder to the body with this stainless steel mesh.

3. The Racing Factory Yamamoto Stainless Mesh hose with a low expansion rate will better manage the pressure inside the hose, giving a more direct feeling.

RACING FACTORY YAMAMOTO STAINLESS MESH CLUTCH LINE FOR HONDA S2000 AP2 RACING-FACTORY-YAMAMOTO-00146

HKS LA CLUTCH FOR SUBARU BRZ ZC6 FA20 26010-AT001

 

HKS LA CLUTCH FOR SUBARU BRZ ZC6 FA20 26010-AT001

Model: ZC6
Model Year: 12/03-
Mission Type: Stock 6 speed
Form: PUSH
Flywheel Weight: 5.8kg
Clutch Type: SINGLE

HKS LA CLUTCH FOR SUBARU BRZ ZC6 FA20 26010-AT001

BREMBO BRAKE PADS EXTRA LEFT AND RIGHT SET REAR FOR VOLKSWAGEN GOLF VI 1KCCZ 1KCDL 09.09-13.04 P85-073X

 

BREMBO BRAKE PADS EXTRA LEFT AND RIGHT SET REAR FOR VOLKSWAGEN GOLF VI 1KCCZ 1KCDL 09.09-13.04 P85-073X

**This product is a replacement for the genuine product.

1. Product name: Brembo brake pads Extra
2. Model number: P85 073X
3. F/R: Rear
4. Automobile manufacturer: VOLKSWAGEN
5. Vehicle model: GOLF VI
6. Model number: 1KCCZ 1KCDL
7. Year: 09/09~13/04

Notes:

《Grade》2.0 GTI Caliper TRW・LUCAS

JAN code: 4580439056503

BREMBO BRAKE PADS EXTRA LEFT AND RIGHT SET REAR FOR VOLKSWAGEN GOLF VI 1KCCZ 1KCDL 09.09-13.04 P85-073X

M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001

 

M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001

1. This is SEIBON bonnet! Twill carbon bonnet with a function-oriented layout with two intake ducts on the left and right in the center of the carbon bonnet.

2. Reinforcement is applied to the back side to suppress deformation of the bonnet. 

3. It has both light weight and strength by holding it down to 5.5 kg against the genuine weight of 10 kg. 

4. In addition, the back of the duct has a structure that prevents water from entering, so an inner protector is not required. 

5. Carbon bonnet type S uses the material of front carbon back FRP. The back side is also reinforced and an air duct drain hole is installed. 

6. In consideration of safety when driving on the street, you can use it with confidence even without bonnet pins by using a genuine striker. 

7. However during sports or performance event such as circuit driving, the bonnet lock may come off due to wind pressure related to the lightweight bonnet. It is recommended to use the bonnet pin together for safety. 

8. UV cut clear coating is recommended for carbon bonnet to maintain long-term quality.

M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001

OKUYAMA STRUT TOWER BAR ALU FRONT I FOR BMW E46 M3 BL32 621-733-0

 

OKUYAMA STRUT TOWER BAR ALU FRONT I FOR BMW E46 M3 BL32 621-733-0

1. The OKUYAMA Strut Tower Bar for BMW E46 M3 will suppress twisting of the body and improves handling and stability. 

2. In fact, this is a standard item for body reinforcement for a better steer and performance.

3. The stress will be transmitted from the road surface to the strut upper part through the shock absorber that support the weight of the engine.

4. The stress from road propagates through all connecting components in the front section and causes a high load (twist) on the body. 

5. Connecting the left and right suspension upper mounting parts with OKUYAMA Strut Tower Bar will increase the body rigidity and perform the original work of the suspension.

6. Apart from that it will also suppress the twist of the body that occurs during cornering and improve handling and stability simultaneously.

7. The pipe built from aluminium was an oval shaft with high torsional rigidity. (Pipe diameter 20 mm x 40 mm Thickness: 3.0) 

**Installation is bolt-on. 
The strut upper part of the E46 M3 comes in two types, a flat type and a stepped type, but it can be attached to either one.

OKUYAMA STRUT TOWER BAR ALU FRONT I FOR BMW E46 M3 BL32 621-733-0

J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

 

J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

1. This is front lower arm reinforced compliance bush from J’S Racing for Civic FK8.

2. By using a reinforced bush with high hardness and excellent durability, bush deformation during cornering is reduced. 

3. It will improve straight-line stability at high speeds, achieve more direct handling and gives quicker steering response. 

4. This is a must-have item for all stages if performance driving; from street to circuit.

J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

 

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

Specifications: 

1. Main pipe: SUS436 (1.2mm thick) all stainless steel 

2. Tail end: SUS304 curl 
SUS304 bullet type 
Standard type (drum type) 

3. JASMA certified product 

4. Certification number: 03S11940

5. Main pipe diameter: 70Φ 

6. Tail end outer diameter: 150Φ→100Φ (130)

7. Exit position: Single on the left side 

8. Genuine exit position: Single on the left side

9. Number of divisions: 2 

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

 

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code:-
Displacement: 3.2 LITER 
Grade / Specifications: R32 V6

Compatible Engine: BUB

1. Specially designed carbon to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Gives better torque and power-up in the entire range from low to high revs for higher performance.

4. Gives sporty intake sound to excite.

5. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

 

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

Applicable Car: ACCORD 
Applicable Models: CL7 EUROR, CL9 
Product classification: Car Power Unit

1. The power transition is smooth with no judder feeling and the performance is better than non-asbestos clutch. 

2. Extremely resistant to "warping" due to heat and is recommended for sports driving. 

3. It is not slippery even with rough clutch operation and has excellent durability. 

4. Shown an outstanding connection performance even at high rpm and has achieved over 12,500 rpm in the burst test. 

5. This FEEL’S HONDA Twincam Copper Mixture Clutch is a recommended item built from new material with an excellent fade and abrasion resistance. 

6. This set of a reinforced clutch cover givesb a crimping force of 600 kgf / mm. 

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

STI DRILLED DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

 

STI DRILLED DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

1. This an STI Drilled brake disc rotor for a stable braking performance, better controllability and improved cooling performance. 

2. Due to the drilled disk surface and spiral vane of the internal structure, the cooling performance from high temperature is improved by about 7%. 

3. The cleaning performance of the brake pad surface and the degassing effect during fading will stabilize the μ characteristics.

4.  The synergistic effect from μ to the structure with increased rigidity will improve controllability as a whole.

5. The listed prices are the manufacturer's suggested retail prices excluding wages. 

6. This product is the price per sheet (2 sheets are required for 1 unit).

7. The following info are notes for SUBARU BRZ (ZC) type customers (SUBARU BRZ (ZD) type is not applicable).

* It is recommended to install it as a set with STI brake pads (front: ST26296ST020 / rear: ST26296ST030). 

* Cannot be attached to Brembo calipers. 

* When installed on RA Racing, it does not conform to the regulations of "GAZOO RACING 86 / BRZ Race". 

* Please make sure that the target vehicle is an F: 16-inch disc and an R: 15-inch ventilated disc.

STI DRILLE DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

 

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

Compatible Models: *1993-2002 Toyota Supra [JZA80]

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

 

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

Compatible Car: S200 AP1 AP2

Compatible Models: F20C F22C

Genuine P/N: 14401-PCX-004
Number of Pins: 138

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

 

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

1. The high-boost and high-compression F20C engine tends to experience distortion between the cylinder head and the cylinder block.

2. This is a junction part of the combustion chamber that engage in a massive movement.

3. JUN AUTO Reinforced Head Bolt will seal and strengthen the high-tuning engine like F20C during severe combustion at high performance situation.

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

**This product is for Integra TYPE-R 98 Spec / DC2. 

**However, it can also be used for DC2R / 96Spec and EK9R by rearranging some genuine parts. 

**Here are the replacement parts for diversion installation. 

Ring gear: 41233-P80-E30 
Counter shaft: 23221-P80-E30 
1st speed bearing: 91107-P80-E31 x 2 
1st speed color: 23914-P80- E30 

**Ring gear and counter shaft can be combined with our original final gear set, but in that case, please use DC2 for 98 spec.

1. Gear teeth are made larger than usual to support high power for better performance, and the shear strength of each tooth is greatly improved. 

2. As a result of mounting it on TOP FUEL 600PS over CR-X and repeating actual battle tests in drag racing (using drag slick tires), the CR-X was able to run without any problems. 

3. The gear ratio that can be used not only for 0-400 but also for the circuit is 0.5 seconds at 0-400 compared to normal in the test (central circuit) conducted in magazine option 2, and how at the circuit. 

4. The result was as fast as 4 seconds. In other magazines and publications, this cross mission is highly evaluated not only in high power tuning machines but also in streets and winding. 

■ Gear ratio (normal gear ratio in parentheses) 
1st gear 2.500 (3.230) 
2nd gear 1.800 (2.105) 
3rd gear 1.250 (1.458) 
4th gear 0.957 (1.107) 
5-speed 0.733 (0.848) 

Note:

1. The ratio is relatively high for turbo cars, so if you use it for NA cars, please use it together with TOP FUEL original low gear final. It will be more effective if you use it. 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

 

Carbon Creations Zeta Front Lip/Add On for Chevrolet Camaro 2010-2013 EXD116461

1. This is 2010-2013 Chevrolet Camaro V8 Carbon Creations Zeta Front Lip Spoiler - 1 Piece

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Carbon Creations Zeta Front Lip/Add On for Chevrolet Camaro 2010-2013 EXD116461