TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

**This product is for Integra TYPE-R 98 Spec / DC2. 

**However, it can also be used for DC2R / 96Spec and EK9R by rearranging some genuine parts. 

**Here are the replacement parts for diversion installation. 

Ring gear: 41233-P80-E30 
Counter shaft: 23221-P80-E30 
1st speed bearing: 91107-P80-E31 x 2 
1st speed color: 23914-P80- E30 

**Ring gear and counter shaft can be combined with our original final gear set, but in that case, please use DC2 for 98 spec.

1. Gear teeth are made larger than usual to support high power for better performance, and the shear strength of each tooth is greatly improved. 

2. As a result of mounting it on TOP FUEL 600PS over CR-X and repeating actual battle tests in drag racing (using drag slick tires), the CR-X was able to run without any problems. 

3. The gear ratio that can be used not only for 0-400 but also for the circuit is 0.5 seconds at 0-400 compared to normal in the test (central circuit) conducted in magazine option 2, and how at the circuit. 

4. The result was as fast as 4 seconds. In other magazines and publications, this cross mission is highly evaluated not only in high power tuning machines but also in streets and winding. 

■ Gear ratio (normal gear ratio in parentheses) 
1st gear 2.500 (3.230) 
2nd gear 1.800 (2.105) 
3rd gear 1.250 (1.458) 
4th gear 0.957 (1.107) 
5-speed 0.733 (0.848) 

Note:

1. The ratio is relatively high for turbo cars, so if you use it for NA cars, please use it together with TOP FUEL original low gear final. It will be more effective if you use it. 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC