M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001

 

M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001

1. This is SEIBON bonnet! Twill carbon bonnet with a function-oriented layout with two intake ducts on the left and right in the center of the carbon bonnet.

2. Reinforcement is applied to the back side to suppress deformation of the bonnet. 

3. It has both light weight and strength by holding it down to 5.5 kg against the genuine weight of 10 kg. 

4. In addition, the back of the duct has a structure that prevents water from entering, so an inner protector is not required. 

5. Carbon bonnet type S uses the material of front carbon back FRP. The back side is also reinforced and an air duct drain hole is installed. 

6. In consideration of safety when driving on the street, you can use it with confidence even without bonnet pins by using a genuine striker. 

7. However during sports or performance event such as circuit driving, the bonnet lock may come off due to wind pressure related to the lightweight bonnet. It is recommended to use the bonnet pin together for safety. 

8. UV cut clear coating is recommended for carbon bonnet to maintain long-term quality.

M&M HONDA TWILL CARBON FIBER WITH CARBON BONNET DUCT FOR CIVIC FD2 MUGEN RR 01100-FD2-S001