Aero Function AF-1 Rear Lip/Add On for Porsche 997 2005-2008 EXD108521

**2005-2008 Porsche 911 Carrera 997 Carrera Carbon AF-1 Rear Diffuser ( CFP ) - 1 Piece

Note: 

1. Will not fit turbo models

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-1 Rear Lip/Add On for Porsche 997 2005-2008 EXD108521

 

Aero Function AF-5 Fender Flare for BMW M3 2008-2013 EXD112894

** This is a 2008-2013 BMW M3 E92 2DR Coupe AF-5 Wide Body Rear Fender Flares ( GFK ) - 2 Piece

Note: 

1. Must be used in conjunction with entire AF-5 wide body kit.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-5 Fender Flare for BMW M3 2008-2013 EXD112894

 

HKS GTIII RS SPORT TURBINE KIT JZX100 1JZGTE VVTI only hks11004-AT004

1. What is GT III Turbine?

"GT III Turbine" is a new generation of turbo combining MHI brand CHRA with HKS original housings. It was designed from HKS vast experiences accumulated over many-many years.

2. Issues that accelerate improve turbo technologies?

Recent requirements towards fuel efficiency and emissions control has accelerated the development of turbo technology. A high efficiency unit with high boost at low air flow + preventing surging is realized.

 

3. What are the advantages of GT III Turbine?

HKS innovation on technology, experience and know how. Exceptional design which minimizes surging is realized through "Made in Japan" manufacturing quality with domestic made casts machined and finished within HKS facilities.

 4. What are the true benefits of GT III Turbine?

High versatile turbo. The combination of the ultimate turbine blades and its optimal housing creates an amazingly versatile turbo. High output, high response turbo tends to suffer with surging. GTIII Turbine minimizes surging and easy to use with flexible setup. A thrust bearing type turbo but with high response that compatible with ball bearing setup.

HKS GTIII RS SPORT TURBINE KIT JZX100 1JZGTE VVTI only hks11004-AT004

 

Corsa 19-21 Challenger SRTHellcatDemonRedeye 2.75in Valved CB DRE w Twin 3.5in Pol Blk PVD Tips cor21070BLK

1. CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology gives a drone free exhaust experience, styled specifically to fit the personality of your vehicle. 

2. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE exhaust note under acceleration and a DRONE-FREE EXPERIENCE during cruise. 

3. This system features a CORSA Performance engineered valve assembly that meshes seamlessly to the vehicle's stock actuator to retain flawless functionality of the Active valved exhaust system. 

4. Performance gains are not affected by sound choice.

Corsa 19-21 Challenger SRTHellcatDemonRedeye 2.75in Valved CB DRE w Twin 3.5in Pol Blk PVD Tips cor21070BLK

 

Anderson Composites REAR DIFFUSER FORD SHELBY GT500 GT500 2020-2022 AC-RL20FDMU500

1. Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold.

2. Then sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). 

3. Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. 

4. No additional clear coat is required.

5. Fits 20-22 Shelby GT500, 2021-2023 Mach 1

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Mounting tabs and mounting surface of diffuser may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process

*Rear bumper needs to be removed for proper installation

*Additional clips and hardware may be required to optimize installation

*Shipped via ground truck freight only

*Anderson Composites is a supplier of carbon fiber products for Ford Performance Parts.

Anderson Composites REAR DIFFUSER FORD SHELBY GT500 GT500 2020-2022 AC-RL20FDMU500

 

JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket jepBM1009-048

1. The JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket Stepping up to Pro Seal MLS head gaskets from the composite or graphite units now are standard equipment on many factory engines.

2. This trend is being validated by more automakers offering MLS gaskets on select high-performance engines in their lineups. 

3. Also, all NASCAR and Pro Stock teams use MLS gaskets as composite fell out of favor and solid copper gaskets were not effective in sealing fluids. 

4. An abbreviation for multi-layer steel, MLS gaskets have taken center stage in the shop due to a number of engine-builder-friendly features. 

5. Granted, they can be a bit more expensive that conventional gaskets, however, the performance and durability advantages will pay off in the long run.

6. The “JE Pro Seal gaskets differ greatly from OEM gaskets,” said Jeremy Anderson of JE Pistons. 

7. “JE Pro Seal gaskets have a proprietary outer layer coating that prevents them from sticking to the deck surfaces. 

8. JE gaskets go through a heat treating and tempering process for good.

9. The basic premise of a MLS gasket is sandwiching three or more layers of thin steel that have been embossed in critical sealing areas. 

10. The embossments act as “springs” to ensure that there is no leakage of fluids or combustion pressure if the cylinder head moves or expands while the engine is under heavy load. 

11. The gaskets can also be coated to improve sealing in “micro” areas between the block, head and gasket.

JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket jepBM1009-048

 

JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 jep361343

1. These are JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 

2. The Ultra Series forged pistons from JE are the industry’s strongest, most fully featured pistons available off the shelf for performance cars.

3. Offered for a wide range of import and sport compact applications from 2JZ to 4G63 and Audi to BMW. The Ultra Series pistons feature JE’s proprietary Aligned Grain Flow forging technology providing next-level tensile strength ideal for the extreme cylinder pressures of power adder engine builds. 

4. Equipped with custom level features including thermal barrier crown coating, skirt coating, gas ports and more.The Ultra Series are the ideal pistons for your high-boost build. 

5. As with all JE Pistons products, Ultra Series pistons are made 100% in the USA.

 

• Designed for Power: Every feature on Ultra Series Pistons are optimized to perform high-horsepower racing engines 

• Aligned Grain Flow Technology: Exclusively available on JE Ultra Series, this proprietary, in-house forging process maximizes tensile strength to withstand the stresses of high-performance engine environments 

• Skirt Coating: Reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise, especially on cold start 

• Thermal Barrier Crown Coating: This ceramic-based coating reflects heat into the combustion chamber, therefore reducing piston crown temperatures and improving exhaust gas scavenging 

• High-Strength Wrist Pins: Premium thick-wall wrist pins are manufactured by Trend Performance in the USA and are designed for the demands of high-performance/ power-adder builds 

• Lateral Gas Ports: Help maintain power-producing ring seal at the top compression ring, even in high RPM and high boost situations 

• Optimized Pin Oiling: Enhanced pin oiling features keep pin, pin bores, and small-end lubricated for reduced heat, friction and wear 

• Made 100% in the USA 

***IMAGES ARE REPRESENTATIVE AND NOT OF THE ACTUAL PRODUCT YOU WILL RECEIVE***

JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 jep361343

 

Duraflex GT500 V2 Hood for Ford Mustang 2010-2012 EXD115195

**2010-2012 Ford Mustang Duraflex GT500 V2 Hood - 1 piece

Note: 

1. Hood pins are required.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex GT500 V2 Hood for Ford Mustang 2010-2012 EXD115195

 

MagnaFlow Cat-Back Exhaust Kit Street Series 2-1/2" Stainless Steel for Mustang EcoBoost 2015 mag19097

The efficiency of exhaust system will determine the real horsepower to be produced.

The MagnaFlow 21/2” catback exhaust for Mustang Ecoboost was built with great characteristics with exceptional sound and workmanship quality.

Material: 100% Stainless Steel

Tubing O.D. Size:2.5in.

System Type: Cat-Back

TIP O.D. Size:4.5in.

TIP Quantity: 2

Single/Dual: Dual

Exit Position: DUAL SPLIT REAR EXIT

Features and Benefits:  
Lifetime Warranty
Dyno Tested And Proven To Make Power
Performance Gains In Horsepower And Torque
Great Sound -Has A Smooth
Deep Tone
Easy To Install
Mandrel-Bent. All Welded. 
Built To Last.

MagnaFlow Cat-Back Exhaust Kit Street Series 2-1/2" Stainless Steel for Mustang EcoBoost 2015 mag19097

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet

 

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet

1. This is Clutch Masters’s finest and most economical multi-plate clutch systems available for today’s high performance vehicles.

2. Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. 

3. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. 

4. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. 

5. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit.

6. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. 

7. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available.

850 SERIES – STREET/ RACE  (8.50” Twin Disc) – 1 sprung ceramic disc, and 1 fiber tuff rigid disc

**The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load.

All systems include:

• Cover Assembly with attached Diaphragm
• Pressure Plate Ring
• Two Discs
• One Mid Plate
• Billet Aluminum or Steel Flywheel
• Release Bearing
• Pilot Bearing (when applicable)
• Pressure Plate Bolts

Please Select Which Transmission Type you will be using.

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet

 

Haltech Elite 2500 + Toyota Chaser JZX100 (1JZ-GTE) Plug 'n' Play Adaptor Harness Kit HT-151354

HARNESS OVERVIEW

If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. 

These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.

ECU OVERVIEW

The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite 1500/2500 at an affordable price. 

Featuring a robust, environmentally sealed, waterproof case, 6 fuel and 6 ignition channels, on-board data logging and flex fuel tuning the Elite 750 is a powerful, compact ECU. 

Alongside the Elite 750 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. 

Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.

Supports 1 to 8 Cylinder engines and 1 to 3 Rotor engines either Normally Aspirated or forced induction. 

1. Load sensing by Throttle Position (TPS), Manifold Pressure (MAP) or Mass Air Flow (MAF)

2. Staged, Sequential, semi sequential, batch or multipoint injection patterns.

3. Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems.

4. Connect to a wide range of display dashes and expansion devices via CAN.

5. Waterproof case (IP67) (with USB cover fitted) 34 position AMP connector6 x Fuel Injection Outputs (peak and hold (0-8A peak / 0-2A hold)6 x Ignition Outputs2 x Dedicated Engine Position inputs with extensive trigger type support2 x Digital Pulsed Inputs5 x Digital Pulsed Outputs2 x Analogue Voltage Inputs3 x Dedicated Inputs (Throttle Position, Coolant Temperature & Air Temperature).

6. Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29psi). 

7. Up to 45 channels of Input & Output (I/O) expansion (via CAN). USB Laptop Communication (Windows). On-board data loggingESP Calibration Software - Intuitive and easy to use

Haltech Elite 2500 + Toyota Chaser JZX100 (1JZ-GTE) Plug 'n' Play Adaptor Harness Kit HT-151354

 

Verus Engineering Billet High Strength Steel Clutch Fork - Subaru STI A0377A

Verus Engineering had set out to greatly increase the strength and longevity of the OEM cast ductile iron STI clutch fork. 

The Verus Engineering fork is specifically designed for use with high-strength pressure plates and clutches where the OE cast iron fork begins to show its weakness.

The Verus Engineering billet fork was designed utilizing advanced FEA (Finite Element Analysis) software to dramatically increase strength, rigidity and overall longevity. 

The unit is CNC machined from pre-hardened steel and then zinc coated black for corrosion resistance. 

It was then pressed in OE style PTFE lined bushings for effortless operation.

The clutch fork fits a variety of Subaru makes and models; to refer to fitment chart at the bottom of this page to ensure your vehicle can utilize this clutch fork.

WHAT IS INCLUDED• Billet Steel Clutch Forko Black Zinc Coatedo PTFE Lined Bushings, Installed

FEATURES• Increase Strength• Increase Rigidity• Improve Pedal Feel• Increase Longevity of Clutch Fork• OEM Fit and Finish

SPECIFICATIONS• FEA Optimized Design• Machined High-Strength Steel Alloy Construction• Black Zinc Coated for Rust Resistance• PTFE Lined Bushings for Smooth Operation• OEM Fit and Finish• Made in the USA.

Compatibility With Other Subaru Models:

2004 - 2006 Subaru Impreza WRX STI

2008 - 2014 Subaru Impreza WRX STI Hatchback

2007 Subaru Impreza WRX STI Limited

2011 - 2014 Subaru Impreza WRX STI Limited Hatchback

2011 - 2014 Subaru Impreza WRX STI Limited Sedan

2011 - 2014 Subaru Impreza WRX STI Sedan

2010 Subaru Impreza WRX STI Special Edition Hatchback

2007 - 2009 Subaru Legacy GT spec.B

2015 - 2020 Subaru WRX STI Base

2015 Subaru WRX STI Launch Edition

2015 - 2020 Subaru WRX STI Limited

2016 Subaru WRX STI Series.HyperBlue

2018 Subaru WRX STI Type RA

Verus Engineering Billet High Strength Steel Clutch Fork - Subaru STI A0377A

 

Manley Honda (K20A K20Z) 16pc Titanium Retainers man23140-16

1. Manley Honda (K20A K20Z) 16pc Titanium RetainersTitanium retainers are manufactured in Manley’s own double spindle CNC machines.

2. The Manley spindle CNC machine will gives exact tolerances and precise installed height specifications.

Valve Stem Diameter : 5.5mm

Degree : 7

Use with Spring : 22140-16

Use with Lock : 13010-8

3. Retainers are extremely important for high performance engines to ensure the springs stayed in place and give correct pressure on the valve springs.

4. By having this titanium retainers known for its strength; will stop the valve stem locks from pulling through the retainers when using high springs pressure.

Manley Honda (K20A K20Z) 16pc Titanium Retainers man23140-16

326POWER MANRIKI POWER WING NORMAL FOR TOYOTA 86 ZN6 326POWER-00001

 

326POWER MANRIKI POWER WING NORMAL FOR TOYOTA 86 ZN6 326POWER-00001

Compatible Car: Toyota 86 ZN6

A special item that matches the shape of the trunk of the Toyota 86 with a stylish and flawless design. 

Above all, the angle, the clearance with the fender and all the proportions were done nicely. 

An exquisite aggressive design that surface up the capability of your Toyota 86 ZN6.

Selectable from NORMAL size and WIDE size.

326POWER MANRIKI POWER WING NORMAL FOR TOYOTA 86 ZN6 326POWER-00001