J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

 

J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

1. This is front lower arm reinforced compliance bush from J’S Racing for Civic FK8.

2. By using a reinforced bush with high hardness and excellent durability, bush deformation during cornering is reduced. 

3. It will improve straight-line stability at high speeds, achieve more direct handling and gives quicker steering response. 

4. This is a must-have item for all stages if performance driving; from street to circuit.

J'S RACING FRONT LOWER ARM REINFORCED BUSH FOR HONDA CIVIC FK8 RFLC-K8

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

 

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

Specifications: 

1. Main pipe: SUS436 (1.2mm thick) all stainless steel 

2. Tail end: SUS304 curl 
SUS304 bullet type 
Standard type (drum type) 

3. JASMA certified product 

4. Certification number: 03S11940

5. Main pipe diameter: 70Φ 

6. Tail end outer diameter: 150Φ→100Φ (130)

7. Exit position: Single on the left side 

8. Genuine exit position: Single on the left side

9. Number of divisions: 2 

5ZIGEN PRORACER ZZ EXHAUST FOR TOYOTA SUPRA E-JZA80 PZT023

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

 

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code:-
Displacement: 3.2 LITER 
Grade / Specifications: R32 V6

Compatible Engine: BUB

1. Specially designed carbon to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Gives better torque and power-up in the entire range from low to high revs for higher performance.

4. Gives sporty intake sound to excite.

5. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR VOLKSWAGEN GOLF 5 1KBUBF FRI-0190

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

 

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

Applicable Car: ACCORD 
Applicable Models: CL7 EUROR, CL9 
Product classification: Car Power Unit

1. The power transition is smooth with no judder feeling and the performance is better than non-asbestos clutch. 

2. Extremely resistant to "warping" due to heat and is recommended for sports driving. 

3. It is not slippery even with rough clutch operation and has excellent durability. 

4. Shown an outstanding connection performance even at high rpm and has achieved over 12,500 rpm in the burst test. 

5. This FEEL’S HONDA Twincam Copper Mixture Clutch is a recommended item built from new material with an excellent fade and abrasion resistance. 

6. This set of a reinforced clutch cover givesb a crimping force of 600 kgf / mm. 

FEEL'S HONDA TWINCAM COPPER MIXTURE CLUTCH SET FOR HONDA ACCORD CL7 EURO R FEELS-00082

STI DRILLED DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

 

STI DRILLED DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

1. This an STI Drilled brake disc rotor for a stable braking performance, better controllability and improved cooling performance. 

2. Due to the drilled disk surface and spiral vane of the internal structure, the cooling performance from high temperature is improved by about 7%. 

3. The cleaning performance of the brake pad surface and the degassing effect during fading will stabilize the μ characteristics.

4.  The synergistic effect from μ to the structure with increased rigidity will improve controllability as a whole.

5. The listed prices are the manufacturer's suggested retail prices excluding wages. 

6. This product is the price per sheet (2 sheets are required for 1 unit).

7. The following info are notes for SUBARU BRZ (ZC) type customers (SUBARU BRZ (ZD) type is not applicable).

* It is recommended to install it as a set with STI brake pads (front: ST26296ST020 / rear: ST26296ST030). 

* Cannot be attached to Brembo calipers. 

* When installed on RA Racing, it does not conform to the regulations of "GAZOO RACING 86 / BRZ Race". 

* Please make sure that the target vehicle is an F: 16-inch disc and an R: 15-inch ventilated disc.

STI DRILLE DISC FRONT FOR SUBARU BRZ ZD8 ST26300ST000

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

 

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

Compatible Models: *1993-2002 Toyota Supra [JZA80]

VARIS RIDOX COOLING BONNET FRP FOR TOYOTA SUPRA JZA80 VBTO-123

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

 

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

Compatible Car: S200 AP1 AP2

Compatible Models: F20C F22C

Genuine P/N: 14401-PCX-004
Number of Pins: 138

TODA RACING HEAVY DUTY TIMING CHAIN FOR S2000 AP1 AP2 F20C F22C 14401-F20-000

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

 

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

1. The high-boost and high-compression F20C engine tends to experience distortion between the cylinder head and the cylinder block.

2. This is a junction part of the combustion chamber that engage in a massive movement.

3. JUN AUTO Reinforced Head Bolt will seal and strengthen the high-tuning engine like F20C during severe combustion at high performance situation.

JUN AUTO REINFORCED HEAD BOLT FOR HONDA F20C 1027M-H005

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

**This product is for Integra TYPE-R 98 Spec / DC2. 

**However, it can also be used for DC2R / 96Spec and EK9R by rearranging some genuine parts. 

**Here are the replacement parts for diversion installation. 

Ring gear: 41233-P80-E30 
Counter shaft: 23221-P80-E30 
1st speed bearing: 91107-P80-E31 x 2 
1st speed color: 23914-P80- E30 

**Ring gear and counter shaft can be combined with our original final gear set, but in that case, please use DC2 for 98 spec.

1. Gear teeth are made larger than usual to support high power for better performance, and the shear strength of each tooth is greatly improved. 

2. As a result of mounting it on TOP FUEL 600PS over CR-X and repeating actual battle tests in drag racing (using drag slick tires), the CR-X was able to run without any problems. 

3. The gear ratio that can be used not only for 0-400 but also for the circuit is 0.5 seconds at 0-400 compared to normal in the test (central circuit) conducted in magazine option 2, and how at the circuit. 

4. The result was as fast as 4 seconds. In other magazines and publications, this cross mission is highly evaluated not only in high power tuning machines but also in streets and winding. 

■ Gear ratio (normal gear ratio in parentheses) 
1st gear 2.500 (3.230) 
2nd gear 1.800 (2.105) 
3rd gear 1.250 (1.458) 
4th gear 0.957 (1.107) 
5-speed 0.733 (0.848) 

Note:

1. The ratio is relatively high for turbo cars, so if you use it for NA cars, please use it together with TOP FUEL original low gear final. It will be more effective if you use it. 

TOP FUEL CROSS MISSION KIT FOR INTEGRA DC2 98SPEC

 

Carbon Creations Zeta Front Lip/Add On for Chevrolet Camaro 2010-2013 EXD116461

1. This is 2010-2013 Chevrolet Camaro V8 Carbon Creations Zeta Front Lip Spoiler - 1 Piece

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Carbon Creations Zeta Front Lip/Add On for Chevrolet Camaro 2010-2013 EXD116461

TAKATA RACE SERIES RACING HARNESS 4P SEAT BELT RACE 4N SNAP BLACK RH 71500-0

 

TAKATA RACE SERIES RACING HARNESS 4P SEAT BELT RACE 4N SNAP BLACK RH 71500-0

**FIA certified 4-point racing harness. 

1. This is FIA official recognition 4 point type 
Anti-submarine technology ASM system adoption.

2. A 3inch shoulder belt with 2inch  
pull-up adjuster type lap belt meant for performance driving.

3. Aluminum rotary buckle Left and Right can be selected.

TAKATA RACE SERIES RACING HARNESS 4P SEAT BELT RACE 4N SNAP BLACK RH 71500-0

TOMEI T-TRAX ADVANCE LSD FOR SOARER JZZ30 1JZ-GTE 562027

 

TOMEI T-TRAX ADVANCE LSD FOR SOARER JZZ30 1JZ-GTE 562027

Model name : Soarer
Model : JZZ30
Engine Type : 1JZ-GTE
Grade : 
Model year : 91.06-96.08
Transmission : MT/AT
Position : REAR
Standard Def. : Open / Torsen
Disk : 8
Disk Size : L

TOMEI T-TRAX ADVANCE LSD FOR SOARER JZZ30 1JZ-GTE 562027

GRUPPEM RAM AIR SYSTEM FOR VOLVO V60 (I) FB420 FRI-0214

 

GRUPPEM RAM AIR SYSTEM FOR VOLVO V60 (I) FB420 FRI-0214

Compatible Car: VOLVO V60 (I) FB420

Compatible Engine: B420

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Displacement: 2.0 LITER 
Grade / Specifications: T5 / T5R TURBO

1. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature for better performance.

3. Achieves torque and power-up in the entire range from low to high revs. 

4. You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR VOLVO V60 (I) FB420 FRI-0214

NISMO SPORTS CLUTCH DISC FOR SKYLINE ER34 RB25DET 30100-RS252

 

NISMO SPORTS CLUTCH DISC FOR SKYLINE ER34 RB25DET 30100-RS252

**Clutch disc Outer diameter: φ250

**Spline details: φ25×24T

**Friction material and type: Copper mix

Use Clutch Disk: 30100-RS252 as a set with Clutch Cover: 30210-RS255

1. Sports clutch disc and lightweight flywheel are designed and manufactured for the purpose of improving clutch response and corresponding output improvement.

2. The resonance sound "Rattling sound" generated from the transmission and the bearing compared with the genuine Nissan product is easy produced but without any quality issue. 

3. The clutch cover and the clutch disc can not demonstrate their original performance unless they are properly combined. Make sure to use clutch disc and clutch cover made by NISMO as a set.

4. It is not necessary to process the flywheel or the transmission.

5. Please make sure that the transmission and flywheel etc. of the vehicle to be installed are not processed or modified. (It may not be suitable for vehicles that have been processed or changed.)

6. Bearings and sleeves etc. can be used as they are, except when there is a note, but we recommend that you replace them with new ones.

7. When exchanging the clutch release fork release pivot Operating cylinder Pilot bush etc etc.

8. Please be sure to check for wear and breakage etc. Also in the case of a car with a large mileage, please change in advance.

9. Clutch disc clutch cover If the friction surface of the flywheel is scratched, worn out, thermal deformation or the like, replace it with a new one.

10. The enhanced clutch increases the clutch pedal effort compared to standard products and requires accustoming to clutch meet.

11. For Ceramic Metal type clutch discs, metallic sounds and judder beat sounds may appear.

12. The reinforced clutch has an increased crimping force and pedal effort on the cover, so the clutch pedal bracket release fork etc. may bend depending on how it is used, or the life of the operating cylinder may be shortened.

13. Because the torque transmission capacity of the reinforced clutch is up, the transmission and the differential may be damaged or the life may be shortened depending on usage.

14. After installation, be sure to check and adjust the treading margin of the clutch pedal and the break connection according to the maintenance instructions.

NISMO SPORTS CLUTCH DISC FOR SKYLINE ER34 RB25DET 30100-RS252

 

Sikky BMW E46 LSx Swap Headers – 1 7/8″ 304 Stainless Steel sikHDR025SS

1. Sikky headers allow perfect drop-in fitment in the BMW E46 with a Sikky LSx (LS1 / LS2 / LS3 / LS6 / LS7) Swap Kit.

2. All Sikky chassis specific swap headers are designed around using the Sikky mount kits and components.  

3. Sikky cannot guarantee or confirm fitment when used in conjunction with competitors’ product.  

4. Double check the required components section to see if anything else is needed for proper fitment for best performance.

• 1 7/8″ Primaries with a 3″ Collector made of high grade 304 Stainless Steel
• V-Band Flange Pre-Installed (clamp and other half included)
• Includes New Gaskets and Bolts

Fitment Notes:

For proper header fitment you will need to use aftermarket eye ball arms (rear attachment point for lower control arm) as well as Sikky’s low profile steering shaft. 

Sikky BMW E46 LSx Swap Headers – 1 7/8″ 304 Stainless Steel sikHDR025SS