M&M HONDA AP RACING BRAKE SYSTEM TYPE 6 R355-32 RACING MODEL FOR CIVIC FK8 00600-FK8-6R355-32-RACING
This is the strongest model that uses the racing model of AP Racing 6-piston brake caliper for the front caliper, which is famous in the world racing scene.
A garland racing rotor made of the highest quality FCD ductile cast iron of the 32mm thick racing type with a rotor diameter of 355mm to 380mm can be selected.
You can experience a different dimension of braking force. It is a set price of a special brake pad, a stainless mesh brake hose and a special bracket for each model.
The best front brake system for HONDA cars, combined with a large-diameter rotor with 6-piston brake calipers made by AP Racing, which is famous in the racing world.
It is the release of the ultimate braking system that does not make you feel the deterioration of braking performance not only on the street but also on long drives on the circuit.
The floating brake rotor (front only) is not fixed by the bell housing (fixed to the hub body when the tire is attached) and the disc rotor is not fixed by the bobbin of the bell housing (floating processing) and moves about 0.2 mm.
The normal type is fixed and naturally does not move. This movement makes it difficult for the judder to escape during braking and for vibration to occur. Rotors with slits are prone to judder, so they may be floated.
This structure was adopted in the Nissan GTR for the first time in motor sports cars (GT races) and commercial cars. Bolt-on mounting is possible with a special design for each model.
■■ Specifications ■■ Caliper
- Large Capacity Big Aluminum Block 6 Piston Racing Caliper
- Racing Model Type R CP9668 Piston
- Deformed 6 Piston-Stainless Material Color
- Matt Racing Gray Rotor
- Limited Lightweight Type 2 Piece Ventilated Slit Rotor diameter 355mm-380mm selectable Thickness 32mm Slit 24 pieces
- Air gap with rotation direction Rotor material
- FCD ductile cast iron garland racing rotor use bell hat
- Limited large diameter high hardness
- Duralumin bell housing use racing full floating processing
- Lightweight processing alumite processing bracket
- High-hardness Duralumin Special bracket brake pad for each model
- Special brake pad Ferrode racing Brake hose
- Special stainless mesh brake hose
- Brake squeal prevention spring set Bell color
Select from black, silver, gold Custom color / Red, blue with some additional cost.
Note.
1. It may not be possible to install it depending on the wheel size, wheel shape and offset size.
2. Also, please note that it may be adjusted with a wheel spacer or the like.
3. Please install and use at your own risk. Some parts require specialized knowledge and tools, so be sure to consult a specialized shop.
4. Manual to be given the customer after installation.
5. Please note that M&M are not responsible for any processing, assembly failure, malfunction due to misuse, accident, etc. of this product.
No comments:
Post a Comment