The JUN AUTO GT Surge Tank is essentially a high-performance replacement for the 2JZ-GTE’s intake plenum/surge tank. Its job is not simply to make the intake “bigger”; JUN engineered the plenum volume, runner geometry, runner length and airflow distribution as one system.
🧠 What is the surge tank actually doing?
Think of the intake system like this:
Turbo → intercooler → throttle body → JUN plenum → individual runners → 6 cylinders
The plenum acts as an air reservoir and pressure-distribution chamber.
When the six cylinders are drawing air at different moments, the plenum helps prevent one cylinder from seeing substantially different airflow conditions from another.
JUN’s important point is the balance of plenum volume:
🔥 Why this matters on a 2JZ-GTE
The 2JZ is famous for making substantial power with increased boost and airflow. Once the engine’s turbo system, intercooling and cylinder-head airflow are substantially upgraded, the intake manifold becomes part of the airflow equation rather than merely a connecting component.
The JUN design uses an internal curved/funnel-like airflow arrangement intended to improve how incoming air is distributed inside the plenum and toward the runners.
JUN specifically describes this as a way of efficiently drawing the nearby air around the funnel entrance rather than relying simply on making the upper portion of the funnel larger.
⚙️ The engineering philosophy
|
Area |
JUN GT Surge Tank |
|
Main purpose |
High-flow intake distribution |
|
Engine |
2JZ-GTE |
|
Part |
2015M-T002 |
|
Intake type |
Performance intake manifold/surge tank |
|
Plenum philosophy |
Optimized rather than simply oversized |
|
Runner philosophy |
Designed around airflow and pressure behaviour |
|
Turbo compatibility |
Particularly relevant to heavily tuned turbo setups |
|
VVT-i |
Not compatible according to JUN |
|
Injector |
Not included |
|
Throttle body |
Not included |
|
Pipes |
Not included |
|
Stock ECU |
JUN states it cannot be used with the stock computer |
JUN’s current catalogue identifies 2015M-T002 specifically for the non-VVT-i 2JZ-GTE. The product is now listed as discontinued by JUN, although some specialist retailers still list it.
🚀 Where the performance comes from
The interesting part is that a surge tank doesn’t create power like a turbocharger does.
Instead:
Better plenum geometry
↓
more controlled pressure distribution
↓
better cylinder filling
↓
better volumetric efficiency
↓
stronger high-rpm airflow potential
This becomes increasingly relevant as the turbo is capable of supplying more air than the original intake system was designed around.
So the JUN part is best viewed as an air-management component rather than simply a “big intake manifold.”
🏁 The 2JZ build where it makes the most sense
I’d put the JUN GT Surge Tank relatively late in a serious 2JZ build:
Large turbo → efficient intercooler → suitable throttle body → JUN GT Surge Tank → cylinder head → cams → exhaust
On a relatively standard 2JZ, the benefit is much harder to justify. On a properly engineered high-output build, however, the intake manifold becomes an important part of matching the turbo’s airflow characteristics to the cylinder head.
One important installation detail: JUN specifies that the kit doesn’t include the throttle body, injectors or pipes, and its throttle-body arrangement involves a modified Nissan/Infiniti component.
In enthusiast terms: this is a very Japanese/JUN approach to the 2JZ—rather than simply bolting on the largest possible plenum, it treats the intake manifold as an acoustic and fluid-dynamic component designed to control pressure waves, airflow distribution and high-rpm cylinder filling.
Fits:
All 911 Carrera (991) Models with Naturally Aspirated Engines (Will Not Fit Turbo or Turbo S)
Performance Gains:
Gives up to +34 HP and +43 lbs. x Ft. TQ as measured on in-house dyno.
Computer-Aided Design:
Utilized state-of-the-art computer-aided design technology. This exhaust system is designed for custom, high tolerance factory fitment.
TIG-Welded:
100% TIG-Welded for race-proven strength and durability.
3 IN to 2-1/2 IN 304 Stainless Steel Construction:
Constructed of 3 IN to 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability.
High-Flow 304 Stainless Steel Mufflers:
Features high-flow 304 stainless steel polished mufflers, producing a powerful sound. The mufflers has a polished finish for ultimate corrosion resistance.
Quad 3-1/2 IN Diameter Black Exhaust Tips:
Features quad 3-1/2 IN diameter black 304 stainless steel exhaust tips. The tips features an aFe POWER logo for a unique style.
Installation:
Utilizing factory style flanges and hangers; a direct bolt-on system, requires no cutting or modifications for a hassle-free installation.
Integrated Mitered Merge X-Pipe:
A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging.
Emissions Disclaimer:
This product does not require a CARB EO#.
**aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.
1. BORLA Cat-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower for your Golf R.
2. This BORLA exhaust system will increased exhaust velocity, will add power, will gives driving excitement with great fuel economy.
3. Furthermore, the distinctive unique ‘BORLA Sound of Power’ is well respected by motoring enthusiasts everywhere.
4. Each system is built from premium austenitic T-304 stainless steel, superior to T-400 series knockoffs (such as 409). This will give you the absolute best in performance and durability.
5. Ultra-smooth mandrel bends ensure maximum flow & power. Precision computer numerical control (CNC) manufacturing ensures an accurate fit.
6. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
**Does NOT fit MK7.5. System features 4" polished T-304 stainless steel tips.
