Lexus IS300 Wisefab Front Drift Angle Lock Kit WFIS0

1. The first-generation Lexus IS a.k.a. Toyota Altezza has been around for decades. 

2. Nevertheless, this popular chassis is still widely used all over the world by many car enthusiasts due to its relatively light weight, good handling and suitable wheelbase for drifting. 

3. In response to customer requests, Wisefab had decided to develop a PRO level drift angle kit for it. 

4. This has been tested in Europe and USA by some of the best drivers before offering to customers.

5. All the metal components on Wisefab Lexus IS front suspension are made of high strength steel, including sheet metal components, tubes, tube ends and rod ends. 

6. All the parts are manufactured and assembled in Wisefab production facility in Europe.

7. Wisefab offers significant advantages as below:

• Higher roll center (RC).
  On Wisefab knuckle add-on, joints are dropped, which brings the front RC up on lowered car, providing higher roll stiffness and improves drivability.
• Very good camber control and minimal bump steer with high steering angle.
  On drift cars the dynamic camber and bump steer is much more important than static. With Wisefab kinematics, it was assured that the camber would provide very good front grip and bump steer is minimal at all the range of steering.
• Steering jacking control.
  During drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. Wisefab had changed the geometry so that it helps to prevent any handling issues.
• Consistent and predictable self-alignment torque.
  Caster is not the only important parameter to provide sufficient self-alignment torque especially at high angle. It’s the combination of different parameters to maintain consistent trail and self-alignment torque. With Wisefab setup, the steering wheel turns always to the direction of movement and doesn’t get stuck at full lock. 
• Original wheelspeed sensor (ABS sensor) can be used.

8. Kit includes

• Steering rack relocation hardware (FD legal).
• Knuckle add-ons with hardware.
• Lower control arms.
• Upper control arms
• Assembeled tie rods.
• Installation guide.

9. This kit requires overfenders. You may check either Wisefab Kit fits to your car via this FITMENT CALCULATOR

Lexus IS300 Wisefab Front Drift Angle Lock Kit WFIS0