Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

1. Improve your braking system with Project Mu's high quality bolt on brake cooling duct for the Scion FR-S and Subaru BRZ. 

2. The additional cooling will significantly reduce brake fade and rotor wear. 

3. These are direct fit behind the rotors and the 2” inlets can be connected to scoops or to vents in your bumper. 

4. Sold as a pair for front brakes only. 

*Note* Cooling hoses are not included. 

Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

SuperPro Rear Lower Control Arm Bushings - Lexus IS300 SPF3036K

1. Control arm bushes will stabilise the movement of the arms. This will ensure the correct geometry is maintained in all situations.

2. Worn rubber bushes in these locations lead to dynamic changes in wheel alignment. This will effect the handling of a vehicle and shorten tyre life.

3. SuperPro Bushings solved this issue with an excellence material and are perfect for repair or upgrading.

4. WARRANTY: Lifetime

Fitment:
LEXUS
GS 1997-2000 - S160
GS 2000-2005 - S160
IS 1999-2005 - XE10
SC 1991-2000 - Z30

TOYOTA
ALTEZZA GXE10 - 1999-2005
ARISTO 1997-2000 - _S16_
ARISTO 2000-2005 - _S16_

SuperPro Rear Lower Control Arm Bushings - Lexus IS300 SPF3036K

 

Exedy OE Replacement Clutch Kit for Mazda Miata 2006-2014 exeMZK1006

1. This is Exedy OE Replacement Clutch Kit (Mazda Miata 2006-2014) 

2. Kit Contents : 
Pressure Plate
Clutch Disc
Throw-Out Bearing
Alignment Tool
Pilot Bearing

Exedy OE Replacement Clutch Kit for Mazda Miata 2006-2014 exeMZK1006

 

DINAN N54 TURBO INSTALLATION HARDWARE KIT - 2007-2016 BMW 135I 335I 1M Z4 D313-0010

1. This is DINAN N54 TURBO INSTALLATION HARDWARE KIT  for 2007-2016 BMW 135I/335I/1M/Z4
E82/E88/E89/E90/E92/E93

2. This kit contains OEM parts that include gaskets and hardware that must be replaced during turbocharger installation.

DINAN N54 TURBO INSTALLATION HARDWARE KIT - 2007-2016 BMW 135I 335I 1M Z4 D313-0010

 

The 64" Big Wang Kit For Miata Na/Nb 64.40.miata

The 1990-2005 Mazda Miata Wing Kit by Nine Lives Racing is a high-performance aero solution that delivers exceptional downforce without sacrificing top speed. 

This wing kit is designed with track enthusiasts and racers in mind, offering both functionality and precision engineering.

Key Features:

1. Race-Ready Performance:

• Engineered for incredible levels of downforce while maintaining minimal drag.

• Features an impressive 15.2:1 lift-to-drag ratio, making it the best in its class.

2. Lightweight Aluminum Construction:

• Constructed from extruded aluminum, the wing weighs only 0.2 lbs per inch, ensuring minimal weight addition to the car.

• Includes a built-in gurney flap relief, allowing downforce adjustments in seconds for optimal handling.

3. Track-Tested and American Made:

• Originally designed as part of a patented prototype project, these wings are developed and rigorously tested on track to ensure performance.

• Produced in the USA with high-quality materials and craftsmanship.

4. Complete Kit Includes:

• Wing tailored to fit your Miata.

• NLR “Basic” end plates (10” x 8”).

• Pre-welded wing mounts at 40”.

• Durable stainless steel hardware.

5. Custom Build and Lead Time:

• Each wing kit is built to order, with an estimated production time of 4-8 weeks.

With a perfect balance of downforce and top-speed retention, this Nine Lives Racing Wing Kit is ideal for drivers aiming to enhance their Mazda Miata’s track performance. 

Its durable, lightweight design and adjustable downforce make it a must-have for serious enthusiasts.

The 64" Big Wang Kit For Miata Na/Nb 64.40.miata

DINAN RESONATOR DELETE KIT - 2014-2016 BMW M235I Stainless Steel - 3.25" - F22 D660-0058

 

DINAN RESONATOR DELETE KIT - 2014-2016 BMW M235I
Stainless Steel - 3.25" - F22 D660-0058

1. The Dinan Resonator Delete Kit for F22 M235i will allow for an aggressive tone to be achieved from the stock system. 

2. When coupled-up with associated Dinan exhaust, the sound is further perfected into an aggressive growl that is hard to ignore. 

3. This piece removes the factory resonated section and replaces it with straight through 3.25" T304 stainless steel tubing for better flow and sound.

4. Features:
-Deletes resonator under car, between catalyst and rear muffler.
-Stock hydro-formed 80mm piping is replaced by 3.25" (82.6mm) mandrel-bent piping for free flow.
-100% 304 stainless steel construction.
-Bolt-on installation.
-Includes mounting hardware.

NOTE:
Only confirmed to fit with the Dinan Free Flow Axle Back and stock exhaust systems. Fitment with other axle back units is not guaranteed.

DINAN RESONATOR DELETE KIT - 2014-2016 BMW M235I
Stainless Steel - 3.25" - F22 D660-0058

 

Battle Version SUBFRAME SPACERS for BMW E46 BV-BMW-E46-RSUB

1.  The BMW body has the most possibility to crack around the subframe mounts during high performance drive. 

2. The crack will hinder the drive and affect the whole performance of the car at crucial moments.

3. This Battle Version Subframe was  designed to optimize the spread of load from the suspension out as much as possible over the body area.

4. Easy to install.

Battle Version SUBFRAME SPACERS for BMW E46 BV-BMW-E46-RSUB

 

DINAN FRONT CAMBER PLATES - 2012-2021 BMW M235I M240I 228I 230I 320I 328I 330I 335I 340I 428I 430I 435I 440I D160-0007A

1. This is DINAN CAMBER PLATES - for 2012-2021 BMW M235I/ M240I/

228I/ 230I/ 320I/ 328I/ 330I/ 335I/ 340I/ 428I/ 430I/ 435I/ 440I
Front - F20/F22/F30/F31/F34

2. Dinan's F2x F3x Camber Plates allow an impressive 43mm of total camber adjustment (30 degrees negative, 13 degrees positive) 

3. This set up will gives more aggressive negative camber setting that improves grip in the turns for reduced understeer and razor-sharp turn-in. 

4. The positive adjustment range on the camber plates is unique to Dinan and allows the end-user if desired, to retain OEM camber settings on a lowered car.

5.  The Dinan camber plates provide a wide range of adjustments and ride quality.

6. Dinan's suspension components are designed to properly retain the bumpstop so that it compresses as designed from the factory. 

7. The Dinan camber plates are the only ones that utilize a steel alloy mount plate that will resist deforming from pot holes on the street or curb hopping at the track. 

8. Aggressive drivers will benefit from reduced outside edge tire wear as well. 

9. Please note there is a possible increase in road noise with the use of the Dinan F2x F3x camber plate kit. Warranty applies to all parts except for the spherical bearings.

10. Features:
-43mm of total camber adjustment (30 negative, 13 positive from OEM). 

-This translates to 2.5 degrees of negative camber and just over a degree of positive camber being possible. 
-Decreased understeer
-Decreases outside edge tire wear
-Steel alloy mount plate and not aluminum
-Fits with factory strut tower weather seal

DINAN FRONT CAMBER PLATES - 2012-2021 BMW M235I M240I 228I 230I 320I 328I 330I 335I 340I 428I 430I 435I 440I D160-0007A

 

aFe SCORCHER GT Performance Package for Honda Civic Type R 17-20 L4-2.0L (t) afe77-46602-PK

• Dyno-Proven Gains up to +39 HP / +62 Lbs. x Ft. TQ
• Quick and Easy Plug & Play Installation Without Any Modifications
• Around 30 Minute Installation
• Increase Turbo Boost to Improve Vehicle Performance, Efficiency and Throttle Response
• In-Cabin On-the-Fly Power Adjustments via LED light switch
• 4-Power Position Settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
• Leaves No Trace on ECU (No Footprint)
• High Quality Case & Wire Harness w/ Factory Style Connectors
• High Reliability, 100% of Units Tested
• Compatible with Other aFe POWER Performance Products

aFe SCORCHER GT Performance Package for Honda Civic Type R 17-20 L4-2.0L (t) afe77-46602-PK

 

APR 3.0 TFSI Supercharger Drive and Crank Pulley with Belt (Press on) MS100184

1. APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, 

2. This reduced drive pulley diameter spins the supercharger ~9.5% faster. 

3. This results in a healthy bump in horsepower and torque across the entire RPM range with the supercharger operating at a higher rate of speed. 

4. The pulley is CNC machined from billet stainless steel, e-coated black for an OEM appearance and is press fitted to the factory supercharger unit. 

5. Apart from that, APR's Supercharger Crank Pulley Upgrade increases the diameter of the factory pulley from ~162mm to ~187mm. 

6. You will enjoy the increased crank pulley diameter spins the supercharger ~15.4% faster. 

7. An excellence horsepower improvement is significant due to increase of supercharger spinning. 

8. The pulley retains the factory harmonically balanced crank pulley and bolts on top of the existing unit. 

9. It is CNC machined from light weight billet aluminum with great weight saving. It has an anodized black finish and includes new crank pulley bolts. 

10. If you upgrade both the supercharger drive and the crank pulleys, it will resulted in the supercharger spinning ~26.4% faster than stock. 

11. This specification was chosen after extensive engine and chassis dyno testing with various pulley sizes and supercharger speeds. 

12. The result gives a higher horsepower and torque gain across the entire RPM range. 

13. However, for the airflow levels achieved with a dual pulley setup, maximum power is severely restricted by the factory throttle body unit. 

14. Thus, the APR Ultracharger Throttle Body Upgrade is necessary to take full advantage of the dual pulley configuration and is available in platform specific variations for the B8/B8.5 A4/A4/S4/S5, Q5/SQ5 and C7 A6/A7. 

15. Belt Inclusive of Software is sold separately.

16. Please note, specific software is required to maximize output with this product. Use part number MS100025 to remove the factory supercharger drive pulley.

APR 3.0 TFSI Supercharger Drive and Crank Pulley with Belt (Press on) MS100184

 

NISMO Complete Engine Gasket Kit - Nissan RB26DETT R33 1010A-RR595

1. The NISMO R33 RB26DETT Engine Parts - Repair Gasket Kit comes with all the gaskets that you will need for a full engine rebuild. 

2. This NISMO set features a special 1.2mm metal head gasket, for even better engine performance.

3. Fits only R33 Model RB26DETT.

4. Also comes with OEM gasket sealant.

5. Engine rebuild with horsepower improvement requires the best gasket to deal with excessive power.

NISMO Complete Engine Gasket Kit - Nissan RB26DETT R33 1010A-RR595

 

Artec Nissan KA24DE V-Band Exhaust Manifold

1. The KA24 is blessed with its high compression, larger capacity and excellence flowing head. 

2.  Having a right modification involving horsepower improvement on the KA24 is exhilarating. 

3. Artec had spent time to optimize the transitions from the OEM square port to the 36mm ID runners. This is up from the 33mm runners on the SR20 and Evo designs.

4. This transition is valid due to the increased compression commonly seen on KA24 builds and the OE specs, as well as the 20% larger capacity per cylinder.

5. Some of the design features include correct design for LHD cars with proper clearance for a brake booster and the master cylinder lines. Also for the Hicas pump running off the power steering pump. 

6. The wastegate was placed in a right position for easy pipework and venting. 

7. The KA24 manifold utilize Artec unique V-Band system that will accept all 50-55mm V-band turbos and is designed to run standard rotation direction.

8. It was indeed an easy fitment of smaller precision turbo units or Garrett motion G25's all the way up to a PTE 6870 or G35-1050.

9. The wastegate size suits any of the common 44/45/46mm wastegates from companies like Turbosmart, Gofastbits Tialsport and others that share that same footprint.

Artec Nissan KA24DE V-Band Exhaust Manifold

 

BMS Replacement Intercooler for E Chassis BMW BMS-RIC-EBMW

1. This is BMS Replacement Intercooler for E Chassis BMW

2. Will deliver consistently with reliable power run after run with the BMS N54/N55 Upgraded Intercooler 

3. The BMS N54 N55 replacement E Chassis intercooler upgrade for BMW delivers better cooling, more power to the wheels and allows you to hold that power longer during extended runs. 

4. With a larger core and more surface area than stock, your intercooler pressure drop is reduced and cooling dramatically improved. 

5. Will give peak power gains of around 10whp during longer pulls and back to back runs as much as 20-30whp over the factory intercooler. 

6. The replacement E chassis intercooler is suggested for up to 500whp and the BMS 7.5" RACE intercooler is suggested for up to 1000whp.

7. BMS replacement intercoolers are a direct upgraded replacement for your factory BMW intercooler and fully reversible. No additional hardware is required.

8. E chassis BMW FMIC dimensions 20" x 5.25" x 5.25"

9. Features and Benefits
• High-flow oversized design
• Prevents heat soak
• Larger core size
• Larger end tanks
• Direct bolt-on factory replacement

10. E Chassis Intercooler Vehicle Fitment

BMW 1 Series
• 2007-2010 N54 BMW E82 E87 E88 135i
• 2011 N54 BMW E82 1M
• 2011+ N55 BMW E82 E87 E88 135i

BMW 3 Series
• 2007-2010 N54 BMW E90 E91 335i/335ix
• 2011-2013 N54 E92 335is
• 2011 N55 BMW E90 335i/335ix
• 2011-2013 N55 BMW E92 E93 335i/iX
What's Included
• (1) BMS Performance Intercooler for E chassis BMW 

BMS Replacement Intercooler for E Chassis BMW BMS-RIC-EBMW

 

MXP SP Exhaust System for SCION FRS/BRZ MXSPFT86

1. MXP branded exhausts are made of the highest quality SUS304 stainless steel available.

2. It is slightly thicker than most competitor exhaust systems that are offered on the market. 

3. Though a thicker exhaust may have a slight added weight value to it, the extra thickness helps improve on lasting durability and performance.

4. MXP exhausts are significantly lighter than OEM exhaust systems. With the added thickness for durability and light weight reduction, MXP exhausts will increase the performance of your car.

5.FEATURES:

-Weight: 40.8 lbs.
-Material: SUS304 Stainless Steel 

6. Construction
- Layout / Weld Type: Four-piece / TIG welded
- Muffler(s) / Resonators: Twin mufflers, one resonator
- Inner Diameter: 67.2mm
- Outer Diameter: 70mm

MXP SP Exhaust System for SCION FRS/BRZ MXSPFT86