Garrett 2015+ Subaru WRX FA20F 2.0L Air / Air Intercooler - 530HP grt891185-6001

**The Garrett 2015+ Subaru WRX FA20F 2.0L Air-to-Air Intercooler - 530HP

Enhance your Subaru WRX’s performance with the Garrett direct-fit charge air cooler, engineered for the 2015+ Subaru WRX FA20F 2.0L. 

This high-performance intercooler offers cutting-edge technology, seamless installation, and a significant boost in power and efficiency.

Key Features of the Garrett WRX Intercooler:

1. Supports up to 530 Horsepower: Designed for high-performance applications, the intercooler delivers an impressive power gain.

2. 70% Larger Core: Features a bar-and-plate construction with a 70% larger aluminum core than the stock unit, ensuring better cooling capacity.

3. Advanced End Tanks: Optimized cast aluminum end tanks reduce turbulence and improve airflow for maximum efficiency.

4. Improved Performance Gains:

• Up to 16 HP (12 kW) and 15 lb-ft (20 N-m) of torque increase.

• Average 30 °F (16.7 °C) reduction in intake manifold temperature for cooler, denser air.

5. Durable Construction:

• Bar-and-plate design with advanced offset fin technology.

• TIG-welded for strength and reliability.

• Vacuum-brazed to withstand extreme conditions.

6. Easy Installation: This direct-fit intercooler installs in 1 hour, reusing OEM bolts, clamps, and hoses. Trimming of the engine cover is required for proper fitment.

Proven Performance

• Dyno Testing Results:

• Delivers up to 16 HP and 15 lb-ft torque gains.

• Heat Saturation Resistance: Maintains cooling efficiency even during back-to-back runs in wind tunnel simulations.

• Airflow Optimization: Reduces intake manifold temperatures by an average of 30 °F, ensuring consistent performance under real-world driving conditions.

Upgrade your 2015+ Subaru WRX FA20F with the Garrett Air-to-Air Intercooler and experience unmatched power, durability, and cooling efficiency. 

Perfect for enthusiasts seeking a balance of reliability and top-tier performance.

Garrett 2015+ Subaru WRX FA20F 2.0L Air / Air Intercooler - 530HP grt891185-6001

 

REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips remRK-C2063H-11

1. This is REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips.

2. This is a full 304 stainless steel catback system designed to replace the original factory exhaust. 

3. This system is developed specifically for the 2022+ Civic Sport Sedan with 2.0L NA engine. 

4. The original single exit exhaust is converted to a dual exit with 4.0 inch tip on both driver and passenger side. 

5. It features REMARK LINK LOOP design to control the exhaust note and provide an aggressive tone. 

6. This system does eliminates the OE muffler and is on the louder side of the spectrum. 

7. It does give the burbles on deceleration that many CIVIC enthusiasts enjoy. If you are looking for something on the quieter side, check out REMARK Sports Touring single exit for the Sport Sedan.

8. Includes 2.5" resonated midpipe which splits to dual 2.5" Link Loops and finishes with 4" tips. Offered in polished or burnt finish stainless steel tips. 

9. Each system is precisely constructed and fully TIG welded by REMARK master craftsmen. 

10. INCLUDED with kit Mounting bracket and additional rubber exhaust hanger for the driver's side section of the exhaust as well as the OE Honda plastic driver's side exhaust trim from the Si model. This allows for a complete bolt-on system. 

11. A small amount of trimming is required to the bottom of the rear bumper to allow clearance for the exhaust hanger bracket. See the install guide. 

Part Number Stainless Steel: 

**RK-C2063H-11 

**Year/Make/Model 2022+ Honda Civic Sport Sedan [FE2] 

**Chassis / Engine FE2, 2.0L NA Exhaust **Type Catback System, 4pc design Piping Diameter 2.5" mandrel bent piping to Y-pipe 2.5" to REMARK Link Loop design 

**Tip Diameter Dual 4inch exit slant cut tips (one on each side) 

**Piping Material Full T304 Stainless Steel **Muffler Material Full T304 Stainless **Steel Muffler Tip Material Full T304 **Stainless Steel Welding Hand crafted high quality TIG welding 

**Weight Mid-Pipe Resonated

REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips remRK-C2063H-11

 

BLOX Racing Performance Intake Manifold for 1994-2001 Acura Integra GS-R bloBXIM-10100-V3

1. The BLOX Racing Performance Intake Manifold features a larger plenum and longer runners that significantly increase the engine’s incoming airflow and volume, compared to the factory and some other aftermarket units. 

2. Each intake manifold has been balanced, pressure tested and tuned to create more usable horsepower across a wider RPM range. 

3. All BLOX Racing Performance Intake Manifolds are designed to accept factory or aftermarket throttle bodies, and reuse all factory sensors. 

4. BLOX Racing Performance Intake Manifolds are cast using the latest in gravity casting technology, which helps create a smoother internal plenum and runners. 

5. The intake manifold’s overall weight is also greatly reduced. In addition, the IAC port has been relocated in order to accommodate throttle body match-porting up to 72mm. 

6. To add a distinct look, the intake manifold now features a raised nameplate and included BLOX Racing product badge. 

7. The BLOX Racing Version 3 intake manifold features pre-drilled holes on the nameplate that accommodates the new BLOX Racing surface-mount vacuum block. 

8. The surface-mount vacuum block easily bolts on top of the nameplate providing a clean and hassle-free installation. 

9. However, the name badge can be applied if a vacuum block is not used. The surface-mount vacuum block provides additional sources of vacuum and can be mounted on to any flat surface. Vacuum blocks are sold separately. 

10. For maximum results, use with a BLOX Racing cast or billet throttle body, air filter and velocity stack.

BLOX Racing Performance Intake Manifold for 1994-2001 Acura Integra GS-R bloBXIM-10100-V3

 

HPS Performance Shortram Air Intake Kit 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7), Includes Heat Shield, Red 827-676R-1

1. This intake is designed for 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7).

2. Delivers dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. 

3. Fine-tuned by HPS Performance to deliver the maximum performance output through the top end power band- 

4. Features HPS Performance signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps- 4 inch mandrel-bent aluminum tube 

5. Replaces stock restrictive air box and optimizes the airflow with excellent heat dissipation and long lasting durability- 

6. Powder coated steel heat shields integrate with fresh air scoops direct cool air to the air filter for the best cooling effect.

- Includes the All-New HPS Performance Air Filter (Washable and Reusable). 

- HPS Performance Air Filter Part Number: HPS-4300

- Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process.

- No modification is required during the installation.

- Aluminum Tubing Color: Red

- NOT CARB Compliant

- System Type: 827 Series 

- Performance Air Intake Kit with Heat Shield. Manufacturer Part Number: 827-676R- 

HPS Performance Shortram Air Intake Kit 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7), Includes Heat Shield, Red 827-676R-1

 

Tick Performance Polyurethane 12mm Torque Tube Bushing for 2009-2013 Corvette ZR1 & 2014-2019 Corvette TPTTB-002

1. Tick Performance Polyurethane 12mm Torque Tube Bushings (also known as a driveshaft coupler) reduce drivetrain loss without sacrificing streetability. 

2. The Polyurethane construction allowing for a more rigid and stronger driveshaft assembly. 

3. The Polyurethane coupler significantly reduces common failure issues plagued by OEM GM rubber bushings and provides the driver with better vehicle feedback.

4. Fits: 2009-13 C6 Corvette ZR12014-19 C7 Corvettes (Stingray, Grand Sport, Z06 and ZR1) with 12mm Hardware

5. Benefits:

*Reduces drivetrain loss

*Improves Clutch Engagement Feedback

*Significantly Reduces Failure Issues Caused By OEM Rubber 

Torque Tube Bushings Polyurethane *Priced Individually

Tick Performance Polyurethane 12mm Torque Tube Bushing for 2009-2013 Corvette ZR1 & 2014-2019 Corvette TPTTB-002

 

Funk Motorsports BMW B58 Turbo & Manifold Blanket (M140i, 240i, Supra etc.) Titanium Weave FUNK-TBTB58-TI

1. This is BMW M140I/240I/Supra TURBO BLANKET B58 ENGINE | Titanium Weave

2. Funk Motorsport are known for industry leading turbo blankets that improve performance, protection and reliability with the most durable Funk Motorsport BMW M140i B58 engine Turbo blanket.

3. As an industry leading construction, it will reduce temperatures by up to 90% and available in both Titanium and Carbon Fibre.

PERFORMANCE:

- Improve gas flow and increase performance with our BMW M140i B58 engine turbo blanket. 

- Funk Motorsport BMW turbo jackets will insulate the hot side of the turbo and retain the heat within the exhaust gases themselves. 

- Hotter gases accelerate faster leading to them leaving the system sooner improving spool up and throttle response. 

- Insulating the hot side of your turbo also helps to lower the amount of heat from the turbo that dissipates into the engine bay and intake pipework. 

- A cooler intake results in higher performance and more consistent power figures over time.

PROTECTION:

- A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. 

- Protect anything from oil lines, coolant lines and even bodywork positioned close to the turbo from the dangers of excess heat.

RELIABILITY:

- Insulate your BMW M140i B58 engine turbo to reduce excess heat within your engine bay. 

- Reducing the overall temperature of the engine bay will improve the reliability of electronics, and also help improve the temperature of coolant, fuel and oil lines. 

- From a reliability standpoint, the benefits of a turbo blanket are endless.

- Specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. 

- Funk Motorsport new fireproof ultra-high temperature Stainless Steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1300°C. The new, thicker internal heat lagging insulation to provide up to 3x improved heat reduction. 

- This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities.

- The 4-layer construction for improved reliability.

- Uprated external Carbon Fibre twill and Titanium twill for an improved aesthetic and more durable finish.

- ROHS tested and approved to ensure compliance and desired parameters are reached within our material selection.

Note of caution:

**This turbo blanket is not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced.

**Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system.

**Funk Motorsport take no responsibility for fluid contamination our products.

Funk Motorsports BMW B58 Turbo & Manifold Blanket (M140i, 240i, Supra etc.) Titanium Weave FUNK-TBTB58-TI

 

Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE

1. If you’re looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only as a standalone then you got the answer.

2. Vargas Turbo VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings and run PI only. 

3. These deletes were machined from 310 Stainless for extreme heat, corrosion resistance and include 3 hold downs. 

4. These DI deletes will COMPLETELY get rid of all factory provisions including the seal. 

5. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires. 

6. In worse case scenario, possibly damaging your injector bore on the cylinder head. 

7. Vargas Turbo VTT deletes are machined to be a press fit into the cylinder, can be either cooled with liquid nitrogen, dropped in or tapped in with a hammer and then held down with the included hold downs. 

8. Also included the M6 tapped holes on the top of each one, in case they need to be removed then you can attach a slide hammer and remove the delete.

9. These are sold as a kit and come with the following:

• 6 - 310 Stainless DI Delete fittings
• 3 - Hold down brackets

Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

 

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

Swivel steel Hose part: Stainless mesh 

Fitting part: carbon steel material 

Socket part: Stainless steel material 

1. The swivel / steel type is a new type of brake line that combines high quality and high functionality. 

2. It is made of highly durable steel and stainless steel, so it is extremely reliable. 

3. The socket on the vehicle body side is rotated by the swivel mechanism, which makes it easy to handle when installing. 

4. In addition, since the degree of freedom in handling is maintained, it is also a countermeasure against breakage of the brake line due to insufficient line length adjustment. 

5. A "sleeve" made of reinforced rubber is provided at the boundary between the socket and the line to prevent line breakage from the base of the socket, which is also a weak point of the brake line.

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

 

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

1. Securely guards the body and lower part of the floor from contact with the road surface and stone splashes during rally and dirt trial driving. 

2. The material is lightweight and durable aluminum (A5052 thickness t = 2.0). 

3. A perfect fit for the body because it is designed exclusively for each model.

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

 

KBD Body Kits Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper kbd37-2101

KBD Body Kit proved to be the best for your Dodge Neon 2005-2006 based on these facts;

1. INCREDIBLE DURABLITY - KBD Body Kits Polyurethane parts are practically unbreakable, meaning cracks, dents and dings are a worry of the past.

2. PRECISE FITMENT - Guaranteed fitment - Tabs and drilling indentations are included on every part!

3. EASY INSTALLATION - Body Shops love to install KBD Body Kits Polyurethane parts due to their ease of installation and exceptional quality! Each part comes ready for prep and paint - Basic sanding and priming is all that is needed before paint.

4. PERSONALIZED STYLE - From sleek to aggressive, we have styles of body parts that will fit your tastes - Our parts can be seen on professional driver's vehicles all over the world. 

5. MADE IN THE USA - All KBD Body Kits Polyurethane parts are designed and manufactured in the United States to ensure the highest quality, superior style and excellent fitment.

Includes the following: 

Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper (37-2101)

**KBD Body Kit parts are aftermarket and as such will not have an exact 100% OEM Fit. They will REQUIRE fitting/ adjusting/ sanding/ etc. to obtain a satisfactory fit. 

**It is HIGHLY recommended that a professional body shop familiar with installing aftermarket polyurethane parts fit and install these parts for the best results. 

**Because KBD uses highly flexible polyurethane it is also recommended to add reinforcements to larger KBD parts such as bumpers to avoid flexing under load.  

**Many KBD parts are made to order and generally take 5-7 business days to manufacture prior to shipping.

**Some are in stock and ready to ship in 1-2 days, if you are in a rush please contact a sales rep to check stock prior to ordering.

KBD Body Kits Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper kbd37-2101

 

Amber DRL LED Module Set - BMW F90 M5 & G30 5 Series

1. Enhanced Visibility: The vibrant amber color ensures your BMW stands out in any driving condition, providing superior visibility and safety on the road.
2. Premium Quality LEDs: Engineered with high-performance LEDs, the Amber DRL Module guarantees long-lasting durability and consistent, bright illumination, ensuring your BMW looks its best day and night.
3. Custom Aesthetic Appeal: This module transforms your BMW's front-end aesthetics, giving it a unique and aggressive look that complements your build and turns heads wherever you go.
4. Seamless Integration: Designed specifically for the F90 M5 and G30 5 Series, this LED module fits seamlessly into your vehicle's existing DRL housing, ensuring a sleek and factory-like finish without any hassle.

Amber DRL LED Module Set - BMW F90 M5 & G30 5 Series

 

SLR Speed BMW Budget Steering Kit E46 M3 Grey C.00.E46.0052

1. This SLR Speed for BMW E46 using the same proven steering geometry and roll-center+bump-steer correction as the other SLR kits.

2. This budget kit provides you with a billet steel control arm extension that is welded to your OEM control arm for over 100mm of track width increase which provides incredible steering angle (up to 65° or more depending on wheel/tire combo).

3. The E46 applications will include round delrin lollipops. 

4. E46 also requires you to have a set of E30/E36 Steel control arms to modify. This kit will not work with factory E46 Aluminum control arms.

5. 100% USA Design, Fabrication, CNC, Plating & anodizing. 

6. Welding is recommended to be performed by a skilled and competent welder only

SLR Speed BMW Budget Steering Kit E46 M3 Grey C.00.E46.0052