Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE

1. If you’re looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only as a standalone then you got the answer.

2. Vargas Turbo VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings and run PI only. 

3. These deletes were machined from 310 Stainless for extreme heat, corrosion resistance and include 3 hold downs. 

4. These DI deletes will COMPLETELY get rid of all factory provisions including the seal. 

5. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires. 

6. In worse case scenario, possibly damaging your injector bore on the cylinder head. 

7. Vargas Turbo VTT deletes are machined to be a press fit into the cylinder, can be either cooled with liquid nitrogen, dropped in or tapped in with a hammer and then held down with the included hold downs. 

8. Also included the M6 tapped holes on the top of each one, in case they need to be removed then you can attach a slide hammer and remove the delete.

9. These are sold as a kit and come with the following:

• 6 - 310 Stainless DI Delete fittings
• 3 - Hold down brackets

Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE