Funk Motorsports BMW B58 Turbo & Manifold Blanket (M140i, 240i, Supra etc.) Titanium Weave FUNK-TBTB58-TI

1. This is BMW M140I/240I/Supra TURBO BLANKET B58 ENGINE | Titanium Weave

2. Funk Motorsport are known for industry leading turbo blankets that improve performance, protection and reliability with the most durable Funk Motorsport BMW M140i B58 engine Turbo blanket.

3. As an industry leading construction, it will reduce temperatures by up to 90% and available in both Titanium and Carbon Fibre.

PERFORMANCE:

- Improve gas flow and increase performance with our BMW M140i B58 engine turbo blanket. 

- Funk Motorsport BMW turbo jackets will insulate the hot side of the turbo and retain the heat within the exhaust gases themselves. 

- Hotter gases accelerate faster leading to them leaving the system sooner improving spool up and throttle response. 

- Insulating the hot side of your turbo also helps to lower the amount of heat from the turbo that dissipates into the engine bay and intake pipework. 

- A cooler intake results in higher performance and more consistent power figures over time.

PROTECTION:

- A turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. 

- Protect anything from oil lines, coolant lines and even bodywork positioned close to the turbo from the dangers of excess heat.

RELIABILITY:

- Insulate your BMW M140i B58 engine turbo to reduce excess heat within your engine bay. 

- Reducing the overall temperature of the engine bay will improve the reliability of electronics, and also help improve the temperature of coolant, fuel and oil lines. 

- From a reliability standpoint, the benefits of a turbo blanket are endless.

- Specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. 

- Funk Motorsport new fireproof ultra-high temperature Stainless Steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1300°C. The new, thicker internal heat lagging insulation to provide up to 3x improved heat reduction. 

- This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities.

- The 4-layer construction for improved reliability.

- Uprated external Carbon Fibre twill and Titanium twill for an improved aesthetic and more durable finish.

- ROHS tested and approved to ensure compliance and desired parameters are reached within our material selection.

Note of caution:

**This turbo blanket is not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced.

**Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system.

**Funk Motorsport take no responsibility for fluid contamination our products.

Funk Motorsports BMW B58 Turbo & Manifold Blanket (M140i, 240i, Supra etc.) Titanium Weave FUNK-TBTB58-TI

 

Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE

1. If you’re looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only as a standalone then you got the answer.

2. Vargas Turbo VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings and run PI only. 

3. These deletes were machined from 310 Stainless for extreme heat, corrosion resistance and include 3 hold downs. 

4. These DI deletes will COMPLETELY get rid of all factory provisions including the seal. 

5. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires. 

6. In worse case scenario, possibly damaging your injector bore on the cylinder head. 

7. Vargas Turbo VTT deletes are machined to be a press fit into the cylinder, can be either cooled with liquid nitrogen, dropped in or tapped in with a hammer and then held down with the included hold downs. 

8. Also included the M6 tapped holes on the top of each one, in case they need to be removed then you can attach a slide hammer and remove the delete.

9. These are sold as a kit and come with the following:

• 6 - 310 Stainless DI Delete fittings
• 3 - Hold down brackets

Vargas Turbo VTT N54 "DI Injector" Delete Kit VTT-N54-DI-DELETE

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

 

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

Swivel steel Hose part: Stainless mesh 

Fitting part: carbon steel material 

Socket part: Stainless steel material 

1. The swivel / steel type is a new type of brake line that combines high quality and high functionality. 

2. It is made of highly durable steel and stainless steel, so it is extremely reliable. 

3. The socket on the vehicle body side is rotated by the swivel mechanism, which makes it easy to handle when installing. 

4. In addition, since the degree of freedom in handling is maintained, it is also a countermeasure against breakage of the brake line due to insufficient line length adjustment. 

5. A "sleeve" made of reinforced rubber is provided at the boundary between the socket and the line to prevent line breakage from the base of the socket, which is also a weak point of the brake line.

ENDLESS SWIVEL STEEL BRAKE LINE SET FOR PORSCHE 996 GT3 3.6 996 EIB505SS

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

 

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

1. Securely guards the body and lower part of the floor from contact with the road surface and stone splashes during rally and dirt trial driving. 

2. The material is lightweight and durable aluminum (A5052 thickness t = 2.0). 

3. A perfect fit for the body because it is designed exclusively for each model.

OKUYAMA FLOOR GUARD FOR MITSUBISHI LANCER EVOLUTION X RS CZ4A 522-329-0

 

KBD Body Kits Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper kbd37-2101

KBD Body Kit proved to be the best for your Dodge Neon 2005-2006 based on these facts;

1. INCREDIBLE DURABLITY - KBD Body Kits Polyurethane parts are practically unbreakable, meaning cracks, dents and dings are a worry of the past.

2. PRECISE FITMENT - Guaranteed fitment - Tabs and drilling indentations are included on every part!

3. EASY INSTALLATION - Body Shops love to install KBD Body Kits Polyurethane parts due to their ease of installation and exceptional quality! Each part comes ready for prep and paint - Basic sanding and priming is all that is needed before paint.

4. PERSONALIZED STYLE - From sleek to aggressive, we have styles of body parts that will fit your tastes - Our parts can be seen on professional driver's vehicles all over the world. 

5. MADE IN THE USA - All KBD Body Kits Polyurethane parts are designed and manufactured in the United States to ensure the highest quality, superior style and excellent fitment.

Includes the following: 

Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper (37-2101)

**KBD Body Kit parts are aftermarket and as such will not have an exact 100% OEM Fit. They will REQUIRE fitting/ adjusting/ sanding/ etc. to obtain a satisfactory fit. 

**It is HIGHLY recommended that a professional body shop familiar with installing aftermarket polyurethane parts fit and install these parts for the best results. 

**Because KBD uses highly flexible polyurethane it is also recommended to add reinforcements to larger KBD parts such as bumpers to avoid flexing under load.  

**Many KBD parts are made to order and generally take 5-7 business days to manufacture prior to shipping.

**Some are in stock and ready to ship in 1-2 days, if you are in a rush please contact a sales rep to check stock prior to ordering.

KBD Body Kits Dodge Neon 2005-2006 EVO5 Style 1 Piece Polyurethane Front Bumper kbd37-2101

 

Amber DRL LED Module Set - BMW F90 M5 & G30 5 Series

1. Enhanced Visibility: The vibrant amber color ensures your BMW stands out in any driving condition, providing superior visibility and safety on the road.
2. Premium Quality LEDs: Engineered with high-performance LEDs, the Amber DRL Module guarantees long-lasting durability and consistent, bright illumination, ensuring your BMW looks its best day and night.
3. Custom Aesthetic Appeal: This module transforms your BMW's front-end aesthetics, giving it a unique and aggressive look that complements your build and turns heads wherever you go.
4. Seamless Integration: Designed specifically for the F90 M5 and G30 5 Series, this LED module fits seamlessly into your vehicle's existing DRL housing, ensuring a sleek and factory-like finish without any hassle.

Amber DRL LED Module Set - BMW F90 M5 & G30 5 Series

 

SLR Speed BMW Budget Steering Kit E46 M3 Grey C.00.E46.0052

1. This SLR Speed for BMW E46 using the same proven steering geometry and roll-center+bump-steer correction as the other SLR kits.

2. This budget kit provides you with a billet steel control arm extension that is welded to your OEM control arm for over 100mm of track width increase which provides incredible steering angle (up to 65° or more depending on wheel/tire combo).

3. The E46 applications will include round delrin lollipops. 

4. E46 also requires you to have a set of E30/E36 Steel control arms to modify. This kit will not work with factory E46 Aluminum control arms.

5. 100% USA Design, Fabrication, CNC, Plating & anodizing. 

6. Welding is recommended to be performed by a skilled and competent welder only

SLR Speed BMW Budget Steering Kit E46 M3 Grey C.00.E46.0052

 

C&R Racing Chevrolet Camaro 13 ZL1 Heat Exchanger 6 speed Man Trans Only cr56-00011

This is 2012-15 Chevrolet Camaro ZL1 Heat Exchanger 6 speed Manual Transmission Only.

The 2012-2015 Chevrolet Camaro ZL1 aluminum heat exchanger upgrade is a high-performance, American-made cooling solution that's handcrafted and TIG-welded to perfection. 

C&R heat exchanger is engineered to handle the most demanding driving conditions, keeping your Camaro cool and running strong. 

Engineered with hemmed and louvered R-Fins and rolled dimple tubes, C&R heat exchanger provides superior heat dissipation, ensuring that your Camaro stays cool up to 1000 hp in hot climates. 

C&R 42mm core is significantly larger than the stock 19mm core, making it the perfect upgrade for both factory or aftermarket superchargers. 

Its direct bolt-in replacement design using factory bolts and hoses, installation is a breeze. No more unwanted heat soak or limp mode! 

C&R heat exchanger is taller than the automatic version due to the transmission cooler and it was recommend using factory coolant or an equivalent for optimal performance. 

With C&R heat exchanger, you can expect more horsepower, more torque and more track time than with OEM or other competitors.

Don't settle for long cooldown times and limited track sessions - invest in the PWR ZL1 Camaro Heat Exchanger and keep your Camaro running cool and strong. 

Whether you're hitting the track or cruising around town, upgrade with confidence and experience the unfair advantage in cooling technology! 

**Features:

• Direct bolt-in using factory bolts and hoses
• stops heat soak
• recommended for hot climates
• lower IAT'S for higher HP and torque
• keeps the engine from going into limp mode
• Perfect for factory or aftermarket superchargers

**Dimensions: 

• Overall Height / Core Height: 15.43 in / 15.30 in
• Overall Width / Core Width: 27.61 in / 22 in
• Overall Depth / Core Depth: 2.21 in / 1.65 in
• Inlet Size: 0.75 in
• Outlet Size: 0.75 in
• 1/8 NPT Drain Plug

C&R Racing Chevrolet Camaro 13 ZL1 Heat Exchanger 6 speed Man Trans Only cr56-00011

 

Mishimoto - Audi S4 Silicone Turbo Hose Kit misMMHOSE-S4-97TRD

**This is Mishimoto - Audi S4 Silicone Turbo Hose Kit featuring excellent quality for greater performance.

1. Direct fit for 1997-2002 Audi S4. 

2. Max temperature of 330 F. 

3. Made of high grade silicone and heat-resistant embedded fibers

4. Efficiently reduces heat

5. Increases pressure tolerance

6. OEM replacement fit

7. Available in black, blue, or red

8. Mishimoto Lifetime Warranty

**Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

Mishimoto - Audi S4 Silicone Turbo Hose Kit misMMHOSE-S4-97TRD

 

Bilstein B16 (PSS10) 2015 BMW M3 / M4 Front & Rear Performance Suspension System bil48-244091

1. The B16 (PSS10) suspension kits are made in Germany and feature technology tested on the famed Nurburgring.

2. On top of that, the Bilstein B16 (PSS10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers in an OE quality, direct fit package. 

3. The best part is that, the 10-stage damping system will adjusts both rebound and compression with each click to provide the best handling performance in any condition. 

4. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. 

5. Furthermore, the zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. 

Bilstein B16 (PSS10) 2015 BMW M3 / M4 Front & Rear Performance Suspension System bil48-244091

 

DBA 4000 Series Rotors Front Drilled/Slotted Rotors for Audi Tt Quattro '00-'06, Audi Tt '00-'06, Volkswagen Jetta '04 4838XS

1. If you have stepped beyond the ability of your stock brakes, then these DBA HD Series 4000XS brake rotors are perfect for you. 

2. These rotors contain many of the features that make DBA brake rotors so great. Their patented Kangaroo Paw ventilation, XG150 iron alloy and TSP process work together to allow these brake rotors to handle high-heat situations. 

3. Their non-directional, XS cross-drilled, slot design eliminates the need for different left and right discs and provides a consistent, strong brake feel. 

4. To top off these awesome rotors, DBA applies a protective paint to all non-friction surfaces and adds heat marks so you can monitor your peak brake heat. 

5. Have more confidence in your brakes with these DBA HD Series 4000XS brake rotors. Price is per rotor.

***Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

DBA 4000 Series Rotors Front Drilled/Slotted Rotors for Audi Tt Quattro '00-'06, Audi Tt '00-'06, Volkswagen Jetta '04 4838XS

 

AWE Tuning 2023 Honda Civic Type R FL5 Track-to-Touring Conversion Kit awe3815-11287

1. The AWE Track-to-Touring Conversion Kit for the FL5 allows you to easily switch from AWE's rowdy Track Edition to the more refined Touring Edition.

2. Featuring AWE's patented drone-killing solution, 180 Technology for best performance.

3. The conversion kit allows you to switch it up without needing to purchase a full new exhaust kit.

AWE Tuning 2023 Honda Civic Type R FL5 Track-to-Touring Conversion Kit awe3815-11287

 

IMP Style Carbon Fiber Front Hood - BMW F80 M3 & F82 / F83 M4

1. This IMP Style Carbon Fiber is for the enthusiast seeking a refined aesthetic and aerodynamic design. 

2. It captivates a dynamic look on your BMW F80 M3 & F82 / F83 M4 and break necks as you fly by with this IMP Style carbon fiber front hood.

3. The IMP Style carbon fiber front hood features a gloss carbon finish that shows a modern aesthetic on your BMW F80 M3 & F82 / F83 M4 for a signature appearance on every occasion.

4. The IMP Style front hood is the best material to withhold against road debris and sun damage as best as possible. 

5. This hood features a 2x2 weave & is coated with a UV protectant clear coat to retain its look from the moment you get it and prevent it from fading.

6. Professional installation by a body shop is recommended. Stand out from the crowd with this IMP Style carbon fiber front hood!

***This product is custom-made to order. Please allow 1-3 weeks for production and 1-2 weeks for delivery.

IMP Style Carbon Fiber Front Hood - BMW F80 M3 & F82 / F83 M4

 

GTS Style OLED Sequential Taillights - BMW F82/F83 M4 & F32/F33/F36 4 Series

1. Upgrade your BMW F82/F83 M4 or F32/F33/F36 4 Series with the beautiful GTS Style OLED Sequential Taillights from Bimmer Plug. 

2. These taillights feature advanced OLED technology combined with sequential turn signals for a modern, dynamic look that enhances both safety and style.

FEATURES

1. OLED Sequential Technology: Provides a smooth, flowing turn signal effect for enhanced visibility.
2. GTS Style Design: Adds a bold, aggressive look to your BMW’s rear profile.
3. Brighter Illumination: Delivers superior brightness and sharpness for improved safety.
4. Easy Installation: Plug-and-play design for seamless fitment on BMW F82/F83 M4 & F32/F33/F36 4 Series.

GTS Style OLED Sequential Taillights - BMW F82/F83 M4 & F32/F33/F36 4 Series

 

CSL Style Carbon Fiber Front Grilles - BMW G80 M3 & G82/G83 M4

1. This is a great choice to transform the front-end of your BMW G80 M3 or G82/G83 M4 with the CSL Style Carbon Fiber Front Grilles from Bimmer Plug. 

2. These grilles offer a race-inspired aesthetic, crafted from premium carbon fiber to provide a lightweight yet durable upgrade.

3. It was designed for perfect fitment, they enhance both the performance and appearance of your vehicle, giving it a sleek, aggressive look. 

4. A great option indeed to upgrade your BMW with front grilles that combine luxury and performance.

**Features;

1. Premium Carbon Fiber Construction: Lightweight and durable for long-term use.
2. CSL Style Design: Adds a bold, aggressive look to your BMW’s front profile.
3. Aerodynamic Efficiency: Improves airflow and vehicle performance.
4. Perfect Fitment: Custom-designed for BMW G80 M3 & G82/G83 M4 models.

CSL Style Carbon Fiber Front Grilles - BMW G80 M3 & G82/G83 M4