Anderson Composites DRY CARBON HOOD CHEVROLET CAMARO ZL1 TYPE-LE 2017-2023 AC-HD17CHCAMZL-OE-DRY

Anderson Composites dry carbon hood for Chevrolet Camaro is manufactured using pre-impregnated carbon fiber fabric/ autoclave. 

Pre-preg fabric is made by coating each specific weave with specific amount of resin to optimize its strength. 

Vacuum seal will remove all air between the fabric and mold. It was then placed into an autoclave to cure at high temperature and extreme pressure (removes impurities and strengthens the final product). 

Anderson Composites dry carbon parts have a matte finish (aka dry) because the resin is not coated on the surface.

*DOES NOT FIT LT, RS OR SS

Anderson Composites DRY carbon does not have UV protection, it is recommended to have it coated with an automotive grade clear coat with UV inhibitors if you do not plan to paint or wrap the part.

Hand crafted with an approximate weight of 18.2 lbs. All hoods require hood pins for safety reasons.

Anderson Composites DRY CARBON HOOD CHEVROLET CAMARO ZL1 TYPE-LE 2017-2023 AC-HD17CHCAMZL-OE-DRY

EXEDY HYPER CARBON-D TWIN FOR TOYOTA SUPRA JZA80 TM042HDMC1

 

EXEDY HYPER CARBON-D TWIN FOR TOYOTA SUPRA JZA80 TM042HDMC1

The use of a damper-type center hub provides the best user ability by significantly reduce gear noise generated in the transmission and differential gears.

It will also absorbs shock torque transmitted from abrupt engagements. 

The CARBON-D is a clutch system designed for a quiet and comfortable driving. Incorporates the driver’s need for an easily operated clutch engagement point without negatively affecting the quick engagement response and the carbon-engaged feeling. 

COVER TYPE: PL CLUTCH 

SIZE: 225 

CLAMP LOAD(N): 13000 

PEDAL EFFORT(N): - INCLUDED PARTS: - MAXIMUM TORQUE (N.M): 670

EXEDY HYPER CARBON-D TWIN FOR TOYOTA SUPRA JZA80 TM042HDMC1

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC CR-X INTEGRA B16A B16B B18C 14111-B16-016

 

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC CR-X INTEGRA B16A B16B B18C 14111-B16-016

Compatible car: CIVIC CR-X INTEGRA 

Compatible models: B16A B16B B18C

*Standard valve springs cannot be used.
*TODA Up Rated Valve Springs required.
*Standard ECU cannot be used.

TODA RACING B engine camshaft has been redesigned in response to the requests made by B type race engine users.

Valve lift 12.0 →12.5 (IN), 11.5→12.0 (EX).
Higher lifts will create a more powerful performances.
Angle (valve lift): 305 (12.5) / IN

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC CR-X INTEGRA B16A B16B B18C 14111-B16-016

SPOON RECLINING BUCKET SEAT ALL-81200-001

 

SPOON RECLINING BUCKET SEAT ALL-81200-001

The Spoon Reclining Bucket Seat (ALL-81200-001) is a premium seat designed to balance the sporty feel of a full bucket seat with the comfort needed for everyday driving. 

Developed with precision and quality, this seat is perfect for enthusiasts who want to enjoy spirited driving while maintaining comfort on the street.

Key Features:

1. Sportiness and Comfort:

• Provides the grip and support of a racing bucket seat.

• Designed to enhance shoulder support, ensuring better connection to the car’s movements and maintaining a stable line of sight during dynamic driving.

2. Breathable Material:

• Upholstered with the same highly breathable material used in carbon bucket seats, allowing for improved comfort during extended drives or intense sports driving.

3. Reclining Design:

• Offers adjustable recline functionality, combining the versatility of a street seat with the performance of a bucket seat.

4. Ergonomic Shape:

• Supports your waist and back to reduce fatigue and improve focus during long or spirited drives.

5. Durable Construction:

• Built to Spoon’s high standards for longevity and performance.

Compatibility:

• Designed to fit most Honda models with the appropriate seat rail.

• Seat rail sold separately to allow for vehicle-specific customization.

Benefits:

• Combines a sporty, performance-oriented design with everyday usability.

• Keeps you securely planted during cornering for better car control.

• Ideal for track days, spirited street driving, or daily commutes.

The Spoon Reclining Bucket Seat is a perfect upgrade for Honda enthusiasts who want a high-performance seat without sacrificing comfort. 

It’s an excellent choice for drivers who demand more from their car while retaining street-friendly functionality.

SPOON RECLINING BUCKET SEAT ALL-81200-001

 

Duraflex A-Sport Front Bumper for Honda S2000 2000-2009 EXD105918

2000-2009 Honda S2000 Duraflex A-Sport Front Bumper Cover - 1 

Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

Some modification/adjustment/final fit must be performed for proper fitment. 

No returns or refunds.

Duraflex A-Sport Front Bumper for Honda S2000 2000-2009 EXD105918

Duraflex S Line Front Bumper for Toyota Supra 1993-1998 EXD115704

1993-1998 Toyota Supra Duraflex S Line Front Bumper Cover - 1 Piece

Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

Some modification/adjustment/final fit must be performed for proper fitment. 

No returns or refunds.

Duraflex S Line Front Bumper for Toyota Supra 1993-1998 EXD115704

SAMCO SPORT COOLANT HOSE KIT VINTAGE BLACK FOR FORD SHELBY MUSTANG GT500 40TCS436-C-VINTAGE-BLACK

 

SAMCO SPORT COOLANT HOSE KIT VINTAGE BLACK FOR FORD SHELBY MUSTANG GT500 40TCS436-C-VINTAGE-BLACK

Compatible Car: FORD SHELBY MUSTANG GT500

Engine Model: 5.4 V8 SC 
Model Year: 07~12 
Hoses Count: 6 

At the UK factory where manufacturing is carried out, a consistent in-house manufacturing system allows Meister to carefully wind up each piece based on the jigs made by precision craftsmanship. 

This time-consuming handmade product is the source of SAMCO's high-precision fitting. The laminated structure in which the original silicon material and fiber are layered, boasts an outstanding strength.

This process will suppresses hose expansion and contributes to the suppression of temperature rise in the cooling system in combination with airtightness. 

The flat inner wall eliminates stress on the fluid, as well as maintaining quality even where complex bends and branches occur. 

Adopting right materials according to the application will demonstrates toughness that prevent corrosion and deterioration.

The FORD SHELBY MUSTANG GT500 was blessed with huge horsepower to manage. A better quality of sport coolant hose will support the overall performance for this incredible machine.

SAMCO SPORT COOLANT HOSE KIT VINTAGE BLACK FOR FORD SHELBY MUSTANG GT500 40TCS436-C-VINTAGE-BLACK

 

ARMYTRIX Stainless Steel Valvetronic Exhaust System w/Dual Matte Black Tips Dodge Challenger SRT Hellcat | Hellcat Redeye Demon 2015-2021 DOCHC-QS47M

Features:

• Mid Pipe (DOCHC-M)
• Valvetronic muffler (DOCHC-VML+DOCHC-VMR)
• Wireless remote control kits (OWRC)
• Dual Matte black tips (2xS47M)

Fitment:

• Dodge Challenger SRT Hellcat | Hellcat Redeye Demon 2015+

ARMYTRIX Stainless Steel Exhaust System will increase power, reduce weight and improve sound for your Hellcat.

This precision-made performance system delivers more power, especially in the low and mid rev range.

The effect on the sound is significant, adding a deep resonant sporty sound but at the same time neutralizes the annoying frequencies in the most critical rpm range. 

ARMYTRIX exhaust systems differ from other brand's exhaust systems with their unique "Throttle Pedal Sensor and Engine RPM Signal Auto Functions". 

Through this system ARMYTRIX offers car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. 

When your are driving at high speeds, the valves will automatically open to increase air flow for better performance (HP & torque gained) and a more aggressive sound. 

You can set your own timing for valves to automatically open and close by engine rpm and how deep to press the gas pedal. It's a new innovative system that brings your car to a different level. 

With the ARMYTRIX you are not getting just an exhaust system, but you are getting a driving system you have never experienced before. 

On the race mode (valves opened), the gas goes through the section of straight pipes. This is where you will get the incredible race sound and performance gain. 

With full throttle plus a straight pipe all the way, this l means you will be expecting the LOUDEST sound performance you'll ever hear. 

ARMYTRIX Stainless Steel Valvetronic Exhaust System w/Dual Matte Black Tips Dodge Challenger SRT Hellcat | Hellcat Redeye Demon 2015-2021 DOCHC-QS47M

TODA RACING HIGH POWER MUFFLER SYSTEM FOR S2000 F20C F22C 18000-AP1-001

 

TODA RACING HIGH POWER MUFFLER SYSTEM FOR S2000 F20C F22C 18000-AP1-001

Compatible Model: F20C F22C

Engine type: F20C/ F22C (AP1/AP2)
Weight: 13kg

With a thorough study of design and without compromise, TODA High Power Muffler had marked as a genuine TODA Racing performance item.

Straight tail style titanium end pipe has been specially designed to reduce over hanging weight and to give improved looks. 

The signature blue heat treatment gives a hard worked racing image. With the end receiving special treatment to prevent cracking.

Stainless steel & straight diameter system adopted for better performance. The internal design is based around a constant Ø60 pipe, with no bends or restrictions the engine is able to breath more freely so releasing more power.

(Stainless) Center pipe Ø60mm + (Titanium) Tail pipe Ø90mm on both sides / straight tails.

TODA RACING HIGH POWER MUFFLER SYSTEM FOR S2000 F20C F22C 18000-AP1-001

RS-R SUSPENSION TI2000 DOWN 1SET FOR VOLKSWAGEN SCIROCCO 13CAW W700TD

 

RS-R SUSPENSION TI2000 DOWN 1SET FOR VOLKSWAGEN SCIROCCO 13CAW W700TD

Compatible Car: 

VOLKSWAGEN SCIROCCO 13CAW

Model Year: 2009/5 ~ 
emissions: 2000 TB 
Series: Ti2000 DOWN 
set: 1Set 
down width (mm): - 
spring rate (kg / mm): 

matching grade: 2.0TSI

RS-R SUSPENSION TI2000 DOWN 1SET FOR VOLKSWAGEN SCIROCCO 13CAW W700TD

CSOHARA HIGH SPARK IGNITION COIL FOR HONDA S2000 AP1 AP2 CSOHARA-00051

 

CSOHARA HIGH SPARK IGNITION COIL FOR HONDA S2000 AP1 AP2 CSOHARA-00051

This high spark ignition coil from an authorized dealer comes with a manufacturer's one-year warranty.

Experience the improvement of pick-up response and the extension of VTEC for your S200 with this high performance spark ignition from CSOHARA.

CSOHARA HIGH SPARK IGNITION COIL FOR HONDA S2000 AP1 AP2 CSOHARA-00051

BLITZ CARBON INTAKE SYSTEM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 27031

 

BLITZ CARBON INTAKE SYSTEM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 27031

Compatibile Car: 

TOYOTA GR86 ZN8 SUBARU BRZ ZD8

Model Year : 2021/10-
Chassis Model: ZN8 ZD8 
Engine : F24
Core Type: A3

Product Name: CARBON INTAKE SYSTEM 

Description: 

This is a high performance intake system from BLITZ with carbon duct & case that best fits to engine room with advanced forming technology 

Intake air temperature are properly controlled by making firm carbon ducts & cases, lightweight and of high strength characteristics.

Duct & case are exclusive for complete air system for TOYOTA GR86 ZN8 SUBARU BRZ ZD8 that efficiently captures ram pressure and realizes sharp intake response. 

A trusted stainless steel mesh filter is adopted as the body of the air cleaner, gives a supreme inhalation efficiency and lacy sound. 

Since the stainless steel filter can be used any number of times as it is washed, its capability is semi -permanent and practical.

BLITZ CARBON INTAKE SYSTEM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 27031

MUGEN PERFORMANCE DAMPER FOR HONDA S660 JW5 50460-XNAB-K0S0

 

MUGEN PERFORMANCE DAMPER FOR HONDA S660 JW5 50460-XNAB-K0S0

Compatible model: JW5

"Performance Damper" improves steering stability by attenuating the vibration of the vehicle body and eliminating unpleasant micro-vibration and noise. 

Improves high-quality riding comfort and steering stability, and demonstrates better athletic performance. 

One set for each front / rear.

MUGEN PERFORMANCE DAMPER FOR HONDA S660 JW5 50460-XNAB-K0S0

 

VR Forged D10 Wheel Package Dodge Charger | Challenger 20x9.0 20x11.0 Hyper Black VRF-D10-CHRG-20-HBLK

The VR Forged D10 is a full 1pc forged monoblock wheel. The design of this wheel is the ultimate in lightweight, stylish looking piece. 

The thin split spoke design shows off the vehicles large brakes. Manufactured using a 10,000 ton press, these wheels are incredibly strong. 

This wheel is perfectly matched to any luxury coupe or sedan vehicle.

Information:

• All VR Forged wheels include center caps.
• They are designed to work with most OEM TPMS sensors.
• Some wheels may require aftermarket lug nuts or bolts.
• Weights are estimated from engineering and scale tests.
• Wheels are designed to work with OEM brakes and most big brake kits.& Please provide BBK template if you have questions on fitment.
• All wheels go through extensive testing to meet proper regulations.& e.

Front Wheel Specs:

• Diameter: 20x9.0
• Offset: 20mm
• Bolt Pattern: 5x115
• Center Bore: 71.6
• Wheel Finish: Hyper Black
• Wheel Weight (KG): TBA
• Load Racing (KG): TBA
• Lug Style: Conical
• Recommended Tire Size: 265/40/20

Fitment:

• Dodge Challenger/Charger Front

Rear Wheel Specs:

• Diameter: 20x11.0
• Offset: 16mm
• Bolt Pattern: 5x115
• Center Bore: 71.6
• Wheel Finish: Hyper Black
• Wheel Weight (KG): TBA
• Load Racing (KG): TBA
• Lug Style: Conical
• Recommended Tire Size: 295/35/20

Fitment:

• Dodge Challenger/Charger Rear

VR Forged D10 Wheel Package Dodge Charger | Challenger 20x9.0 20x11.0 Hyper Black VRF-D10-CHRG-20-HBLK

 

VR Aero Carbon Fiber Package BMW M3 | M4 F80 VR-M3M4F80-PAC

Fitment:

• BMW F80 F82 F83 M3 M4 15-20

VR Aero had enhanced the BMW F8X M3 & M4 chassis with the all new carbon fiber body kit. 

This kit has been designed as a complete OEM replacement and attaches directly to the OEM hardware in place of the factory part.

Features:

• Carbon Fiber
• 2x2 Carbon weave
• Gloss Finish
• 3K UV resistant
• Perfect Fitment
• Added Exterior Styling

VR Aero Carbon Fiber Package BMW M3 | M4 F80 VR-M3M4F80-PAC