SPOON SET BRAKE HOSE FOR HONDA INTEGRA DC5 01460-DC5-000

 

SPOON SET BRAKE HOSE FOR HONDA INTEGRA DC5 01460-DC5-000

1. Compatible model: DC5 Zenki, DC5 Kouki

2. The combination of low expansion coefficient No. 3 Teflon tube and stain mesh covering it creates direct brake touch and feel. 

3. Fitting is made of strong steel.

SPOON SET BRAKE HOSE FOR HONDA INTEGRA DC5 01460-DC5-000

 

Wisefab BMW E36 Rally Rear Suspension kit for E36 188Diff WF366_TYP188

1. This is an entry level rear suspension upgrade. This kit can be installed with the OEM TYP188 final drive. 

2. With a Wisefab E36 Rally suspension you will achieve a better ground clearance and get more suspension travel. 

3. Crucial for rally where more grip and speed is needed. You can upgrade your Wisefab E36 rally kit with a bigger final drive like TYP210 or E60M final drive. 

4. Require only a new mounting adapter and can be purchased separately from the kit. There is also room for bigger halfshafts. 

5. Check out Wisefab’s Dynamic halfshafts: Wisefab Dynamic Halfshaft Kit. And you can buy a strut riser kit which enables a 125mm longer coilover to be mounted at the rear. 

6. BMW E36 Complete Rear Axle for Rally.
The main idea with Wisefab axle is to have better kinematics for long stroke and soft suspension and therefore more rear grip, especially side grip in the corners on throttle. 

7. Some kinematic differences are less roll centre migration, good camber gain at ride height, but smaller at full droop compare to original, different anti squat curve, less scrub(track change) with vertical movement, good bumpsteer etc.

8. Better ground clearance. Arms and links are placed higher to have less risk of hitting rocks with suspension components. That could also end up with lowered ride height with better handling and more grip.

Wisefab BMW E36 Rally Rear Suspension kit for E36 188Diff WF366_TYP188

SEEKER LIGHTWEIGHT PULLEY 4-POINT SET RED ALUMITE FOR HONDA CIVIC FD2 11500-FD2-401

 

SEEKER LIGHTWEIGHT PULLEY 4-POINT SET RED ALUMITE FOR HONDA CIVIC FD2 11500-FD2-401

Lightweight pulley SET for FD2 

1. FD2 Civic R lightweight pulley 4-point SET will ensure sufficient strength and durability with high accuracy.

2. Achieved a significant weight reduction of 1078g compared to the genuine total weight of 2890g. 

3. By reducing the weight of the rotating object by 1812g, a direct engine response and sharp rushing acceleration are realized.

4. From the character of FD2 Civic R, the pulley system is the same as the genuine ratio, convenient for everyday use on the street. 

5. You can use your existing belt you are currently wearing. Two (2) colors available, red and blue alumite finish (orange is discontinued).

6. FD2 Civic R exclusive product features:
Crank pulley 486g (1911g) 
Powerste pump pulley 281g (435g) 
Idler pulley 185g (250g) 
Alternator pulley 126g (294g) 

7. Total lightweight 1078g VS 2890g (original) = 1812g weight reduction.

* *The idler pulley in the set is press-fitted with genuine equivalent bearings. Bearings have a limited life, so please check them regularly. (The life of the bearing is the same as the genuine product.) 

**SEEKER also accept the idler pulley sold separately as a repair part. 

SEEKER LIGHTWEIGHT PULLEY 4-POINT SET RED ALUMITE FOR HONDA CIVIC FD2 11500-FD2-401

 

Duraflex GT500 V2 Kit for Scion FRS 2013-2020 EXD112646

1. 2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex GT500 V2 Kit - 14 Piece - 

2. Includes: 

GT500 V2 Front Bumper (112640) 

GT500 V2 Front Splitter (112641) 

GT500 V2 Side Skirt Rocker Panels (112642) 

GT500 V2 Rear Diffuser (112643) 

GT500 V2 Front Fender Flares (112644) GT500 V2 Rear Fender Flares (112645) GT500 V2 Rear Wing Trunk Lid Spoiler (109694)

3. Note: Fenders are +45mm ( front) and +70mm (rear) wider than stock.

4. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

5. Some modification/adjustment/final fit must be performed for proper fitment. 

6. No returns or refunds.

Duraflex GT500 V2 Kit for Scion FRS 2013-2020 EXD112646

FEEL'S HONDA TWINCAM EXHAUST MANIFOLD FOR HONDA INTEGRA DB8 SI-VTEC FEELS-00651

 

FEEL'S HONDA TWINCAM EXHAUST MANIFOLD FOR HONDA INTEGRA DB8 SI-VTEC FEELS-00651

Applicable model: INTEGRA 
Applicable model: DB8, DC2 
Product classification: Car Intake & Exhaust 
Installation classification: Si-VTEC

1. “Exhaust manifold" is a gem of FEEL'S whole body that combines high output and artistic looks at high level. 

2. The finishing is a reminiscent work of art, such as cutting out the flange and processing the step on the weld. 

3. This is a great item from FEEL that allows you to experience torque increase due to the design that pursues high exhaust efficiency. 

All products come with necessary accessories such as gaskets, bolts and nuts, heat-resistant sheets, etc., so you can purchase with confidence. 

FEEL'S HONDA TWINCAM EXHAUST MANIFOLD FOR HONDA INTEGRA DB8 SI-VTEC FEELS-00651

TOMEI COMPLETE HEAD 4G638CH FOR EVO 8 GSR 6SPEED PHASE 1 4G63 233010

 

TOMEI COMPLETE HEAD 4G638CH FOR EVO 8 GSR 6SPEED PHASE 1 4G63 233010

Base Engine Type: 4G63 
combustion chamber volume: about 43.9Cc 
valve: 1 mm oversize 
valve spring: oval wire high lift corresponding 
valve spring retainer: Titanium 
valve spring seat: SPCC < br> valve guide: phosphor bronze 
valve seat ring: STD 
camshaft: IN / EX solid 270-11.50 
solid pivot: shim adjustable 
solid pivot shim: solid pivot-only 

TOMEI COMPLETE HEAD 4G638CH FOR EVO 8 GSR 6SPEED PHASE 1 4G63 233010

GREDDY SUCTION KIT FOR NISSAN GT-R R35 12020907

 

GREDDY SUCTION KIT FOR NISSAN GT-R R35 12020907

Product description:

1. Compatible Engine: VR38DETT 

2. Product Name: GT-R 80φSPL suction kit

3. Long Type piping, Larger 60-80mm diameter piping

*(requires ECU re-calibration for larger diameters)

GREDDY SUCTION KIT FOR NISSAN GT-R R35 12020907

POWER CRAFT HYBRID EXHAUST MUFFLER SYSTEM FOR NISSAN GT-R R35 P-NI120102

 

POWER CRAFT HYBRID EXHAUST MUFFLER SYSTEM FOR NISSAN GT-R R35 P-NI120102

Material: SUS#442~304 
SPEC: 90Φ→70ΦD
ACCESSORIES: Remote Control Kit 
Tail: -130Φ Titan Tail

1. Exhaust efficiency and excellence response on entire speed range.

2. Increase horsepower with high pitch unique sound.

POWER CRAFT HYBRID EXHAUST MUFFLER SYSTEM FOR NISSAN GT-R R35 P-NI120102

TRD GR SPORTS MUFFLER FOR GR SUPRA DB02 42 MS153-14002

 

TRD GR SPORTS MUFFLER FOR GR SUPRA DB02 42 MS153-14002

Brand: TRF

Series name: GR Sports Muffler

Product no: MS153-14002

Compatible car: GR SUPRA DB02 42

1. Will blast a powerful and exhilarating exhaust note to excite.

2. Slit process inside the tail with genuine  valve will create a more exciting experience during acceleration besides surface up the GR SUPRA beauty.

TRD GR SPORTS MUFFLER FOR GR SUPRA DB02 42 MS153-14002

SPOON N1 MUFFLER KIT FOR HONDA CIVIC FL L15C 18000-FL1-000

 

SPOON N1 MUFFLER KIT FOR HONDA CIVIC FL L15C 18000-FL1-000

1. SPOON started the development of the 11th generation CIVIC muffler with the main focus to improve power with better sound and obtain JQR certification.

2. Zooming on requirement of the muffler to secure sufficient exhaust flow rate by increase the diameter, reduce bending and reduce resistance. 

3. High sound deadening performance can be obtained by installing multiple silencers or reducing the diameter to increase exhaust resistance and reduce sound energy. 

4. Conflicting demands of improving output but getting deadening sound performance require thorough examination on few parameters.

5. The pipe diameter, silencer shape and arrangement on the desk are carried out with a flow bench, tested with many prototypes and finalized.

6. For the tail part, two SPOON SPORTS classic "N1 silencers" are released as usual. 
A bumper garnish is included so that the muffler fits naturally into the car body. 

Front pipe: stainless steel, φ60.5. 
Main pipe: stainless steel, φ60.5, after the split φ50.6. 
Silencer: stainless steel, φ65.0, dual exhaust. 
Garnish included 

Common to M/ T and CVT vehicles. 
JQR certification has been obtained. Conforms to security standards. 
Proximity exhaust noise: 89db 
Acceleration running noise: 76db 

SPOON N1 MUFFLER KIT FOR HONDA CIVIC FL L15C 18000-FL1-000

 

Eventuri Mercedes C190/ R190 AMG GTR GTS GT Intake and Engine Cover - Gloss eveEVE-AMGGT-CF-INT

Performance Increase: 

12-18hp, 10-15ft-lb

1. The AMG GTR Eventuri intake is a fully sealed system developed through extensive real world testing and airflow simulation analysis. 

2. The AMG GTR intake system has been independently tested by World leading Mercedes tuning company – RENNtech and has been proven to give improved performance in both stock and tuned engines. 

3. The C190/ R190 AMG GTR Eventuri system used Eventuri Patented Carbon Fibre Housings with Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos.

4. Cone filter with a heat shield plus a unique design will invoke the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo. 

Eventuri Mercedes C190/R190 AMG GTR GTS GT Intake and Engine Cover - Gloss eveEVE-AMGGT-CF-INT

 

Verus Engineering Rear Diffuser Kit - Toyota Supra A0220A

The Verus Engineering Rear Diffuser will deliver unparalleled fit, performance and style to your A90 MKV Toyota Supra. 

1. This will increase the performance and aesthetics of your car with simple to bolt-on kit that requires no permanent modifications.

2. Utilizing state-of-the-art analysis software during the R&D process to increase more downforce and reduce drag.

3. This Rear Diffuser was designed by Verus Engineering for owners looking for function and form. 

4. On track, the diffuser has helped to increase straight line, corner speeds and reduce lap times.

WHAT IS INCLUDED
• Rear Diffuser
• (2) Rear Diffuser Bracket, Front
• (2) Rear Diffuser U Bracket, Front
• (2) Rear Diffuser Bracket, Side
• (4) Rear Diffuser Bracket, Rear
• Hardware Kit, Includes All Necessary Components for a Seamless Install

FEATURES
• CFD Optimized Design 
• Reduce Drag
• Reduce Lift (Increase Downforce)
• Improved Overall Aerodynamic Efficiency (Improved L/D)
• Increase Tire Grip at Speed
• Simple, Non-Invasive, Bolt-on Design

SPECIFICATIONS
• CFD Optimized Design
• 5052-H32 Sheet Aluminum Composition
• CNC Laser Cut
• CNC Press Brake Bent
• Powder-coated Low Gloss Textured Black
• Stainless Hardware Throughout
• Unique Strake-to-Mainplane Construction
• Made in the U.S.A.

Verus Engineering Rear Diffuser Kit - Toyota Supra A0220A

 

APR Performance GT-250 Carbon Fiber Wing for Lamborghini Galardo 2013-2013 aprAS-207101

All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. 

The "2D" design from APR Performance allows the wing to maintain a consistent level of downforce across its entire span. 

Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. 

Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. 

These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. 

All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.

Gurney flaps are included and pre-installed with every GT-250 wing from APR Performance . These are super lightweight, made using pre-pregnated carbon fiber processes.

APR Performance GT-250 Carbon Fiber Wing for Lamborghini Galardo 2013-2013 aprAS-207101

REINHARD CANNONBALL MUFFLER TITANIUM EXHAUST FOR TOYOTA MARK II JZX110 TB 1JZ-GTE RH-F912

 

REINHARD CANNONBALL MUFFLER TITANIUM EXHAUST FOR TOYOTA MARK II JZX110 TB 1JZ-GTE RH-F912

Year model: 00.12~ EXP: 

76.3Φ Specifications 

Tail size: 145Φ shell Single 115Φ 

Type: Compatible 

Material: All titanium 

For normal bumper only, 3 pieces with inner

Compatible engine: 1JZ-GTE

REINHARD CANNONBALL MUFFLER TITANIUM EXHAUST FOR TOYOTA MARK II JZX110 TB 1JZ-GTE RH-F912

BLITZ NUR-SPEC CUSTOM EDITION EXHAUST SYSTEM VSR FOR HONDA CIVIC FL1 63200V

 

BLITZ NUR-SPEC CUSTOM EDITION EXHAUST SYSTEM VSR FOR HONDA CIVIC FL1 63200V

Year Model: 2021/09-
Ex-GAS Code: 6BA-FL1 -
Engine: L15C 
Style: Custom edition
Tail Style: Titanium color 2.5R
Tip O.D.: φ101.6 round-× 4
Tip Count: 4
Pipe Size: φ50 
Pieces Count: 4
Sound Level Stock/ Blitz: 71/ 86

BLITZ NUR-SPEC CUSTOM EDITION EXHAUST SYSTEM VSR FOR HONDA CIVIC FL1 63200V