Monday, March 20, 2023

KRAFTWERKS Supercharger System W/O Tuning - Scion FR-S/ Subaru BRZ

1. This is the brand new intercooled supercharger from KRAFTWERKS for Scion FR-S and Subaru BRZ.

2. The successful of this new set up comes from the Rotrex C30-94, utilize with excellence result by KRAFTWERKS before for 2006-2013 Honda Civic Si system.

3. The supercharger system gives +90HP from 9PSI of boost pressure. Traction drive technology had improved the linear power curve for entire power band.

4. The Rotrex C30-94 Supercharger Unit is extremely influential due to:

-Ultra high efficient

-Silent operation

-Low operating temperature

-Self contain lubrication and cooling system

-High reliability

5. It is an independent Drive System that does not share belt with engine.

6. Toothed Belt System for zero slip assurance during excessive loads and hardest acceleration.

7. Offset Supercharger Placement for greater clearance around belts, reduce rubbing.

8. Cold air intake- strategic filter placement with 20 Degree Fahrenheit under hood.

9. Easy to upgrade with dual bolts patterns on mounting plate for larger C38 Rotrex that capable to handle 700 HP.

10. Optimized tubing and intercooler layout:

-2.5” mandrel bend aluminum hot side

-3.0” mandrel bend aluminum cold side

-11 rows high efficient intercooler

-Lower intake air temperature compare to others

-Up to 460WHP

11. Easy installation with simple bolts on only, no cutting/ welding etc. This is a great supercharger for horsepower and performance improvement.

Note: Kits sold with or without tuning

Get one here:

KRAFTWERKS Supercharger System W/O Tuning - Scion FR-S/ Subaru BRZ

Brian Crower Crankshaft- Subaru EJ205- WRX 79mm Stroke, 4340 Billet

Brian Crower Crankshaft- Subaru EJ205- WRX 79mm Stroke, 4340 Billet

1. This is a high performance crankshaft from Brian Crower. This crankshaft had undergone various tight regime process for the best quality.

2. Built from 4340 billet- this material is known for high strength and toughness. Contain 1.8% nickel-chromium-molybdenum high hardened high tensile steel. Tensile range at 930-1080 Mpa.

3. Undergone Shot Peened process- Cold working process to produce compressive residual stress layer. Modify mechanical properties of metal.

4. Magna Flux inspected- also know as MPI (Magnetic Particle Inspection). It is an NDT (Non Destructive Test) process to detect surface discontinuities in ferromagnetic material.

5. Gone through Nitrided Process- multi steps heat treatment process that diffuse nitrogen into the surface of metal to create a case- hardened surface.

6. It is fully profile counterweighted to reduce windage from the crankcase. This will create less oil resistant for better RPM potential that lead to horsepower improvement.

7. Specifications:

-Stroke: 79mm

-Rod Journal: 52mm

-Main Journal: 60mm

-Weight: 19.2 lbs

Get one here:

Brian Crower Crankshaft- Subaru EJ205- WRX 79mm Stroke, 4340 Billet

Tomei Unequal Length Exhaust Manifold Subaru WRX FA20DIT 2015-2020 TB6010-SB04A

Tomei Unequal Length Exhaust Manifold Subaru WRX FA20DIT 2015-2020 TB6010-SB04A

1. Tomei Unequal Length Exhaust Manifold is different from OEM in few ways.

2. The Tomei Headers do not restrict air flow after engine port like the turbo side from OEM.

3. The restriction of the air flow will retard the process and lead to loss of power and efficiency.

4. The collector for the Tomei Headers are made from lost wax method.

5. The lost wax method will allow for smooth merging of the collector pipes. This will eliminate restriction on the header and improve the performance.

6. The OEM headers had anomaly with few restriction points that will hamper the exhaust flow.

7. The 45 mm piping all the way from engine to turbo will ensure smooth flow without disturb and will improve the horsepower.

Tomei Unequal Length Exhaust Manifold Subaru WRX FA20DIT 2015-2020 TB6010-SB04A

Tubi Style Stainless Steel Loud Version Exhaust System Bentley Continental GT | GTC Gen 1 04-11 TSBECONTS03.003.AR

1. Material: AISI 304 SS

2. For Racetrack use only

3. Main Pipe Dimension: 65

4. Sound: +Rumore

5. End tips design: OE

Tubi Style Stainless Steel Loud Version Exhaust System Bentley Continental GT | GTC Gen 1 04-11 TSBECONTS03.003.AR

CORSA Performance Catback Exhaust for Scion FR-S & Subaru BRZ

1. CORSA Performance had introduced an outstanding catback exhaust systems for the 2012+ Scion FR-S and Subaru BRZ. Designed for horsepower improvement.

2. Featuring the 2.5" 304L stainless steel piping and 4.5" tips in black or polished finish.

3. CORSA Performance utilize their well known patented Reflective Sound Cancellation (RSC) Technology for FR-S/ BRZ.

4. Exceptional exhaust characteristic with aggressive sound under acceleration and a drone-free experience during cruise.

5. Specification:

- 2.5" 304L Stainless Steel Construction
- 4.5" Tips (Black or Polished)
- RSC No Drone Technology
- Mandrel Bends
- Hardware and Instructions Included
- Limited Lifetime Warranty

CORSA Performance Catback Exhaust for Scion FR-S & Subaru BRZ

Sunday, March 19, 2023

P2M Rear Upper Control Arms for Scion FR-S Subaru BRZ 08-14 & WRX/STI 08-20

1. The P2M rear upper control arms was specifically designed for FT86 serious and determine track racers.

2. It was combined with full adjustable rear suspension links. It will enhance manoeuvre and stability with regard to an enhanced horsepower from your car.

3. It will precisely adjust to the ultimate ability of your rear end suspension to achieve desired geometry.

4. It was made from S45C steel tubing, 3pc teflon based rod end w/dust boot. Finishing with thick blue powder coated.

Get one here:

P2M Rear Upper Control Arms for Scion FR-S Subaru BRZ 08-14 & WRX/STI 08-20

Tubi Style Exhaust System Porsche 95B Macan S | GTS | Turbo 14-18 TSPOMACU13.003.A

1. Material: AISI 304 SS

2. For Racetrack use only

3. Main Pipe Dimension: 55

4. Sound: Tubi Sound

5. End tips design: OE

6. Product finish: Polished

Tubi Style Exhaust System Porsche 95B Macan S | GTS | Turbo 14-18 TSPOMACU13.003.A

Saturday, March 18, 2023

Revolution SS Exhaust Set for Toyota 86 Subaru BRZ ZN6 ZC6 RZN6-SSES

Revolution SS Exhaust Set for Toyota 86 Subaru BRZ ZN6 ZC6 RZN6-SSES

1. Developed specifically for higher performance enthusiasts that keen on performance improvement for their machines.

2. The pipe diameter is one size larger than stock with highly efficient catalyzer cell.

3. This exhaust set is comprised of manifold, S pipe and catalyzer.

4. Produce high power at high speed and middle speed range.

5. This exhaust set cuts the genuine second catalyst but use a special exhaust band.

6. Can return to genuine form via bolt on only/ without any welding works.

7. Recommended to setting up ECU.

Get one here:

Revolution SS Exhaust Set for Toyota 86 Subaru BRZ ZN6 ZC6 RZN6-SSES

JUN AUTO Reinforced Head Bolt for Nissan VR38DETT 1027M-N013

1. The high performance monster VR38DETT had high boost and high engine compression from high horsepower engine.

2. Distortion may happen between cylinder head and cylinder block that make the combustion chamber.

3. The excessive severe condition require to be sealed effectively to avoid any mishap.

4. JUN AUTO had come with great alternative to arrest and secure this issue with reliable reinforced head bolts.

JUN AUTO Reinforced Head Bolt for Nissan VR38DETT 1027M-N013

Injen Front Mount Intercooler Kit for Mitsubishi EVO VIII / IX 03-07

1. This is a new Injen Front Mount Intercooler Kit for the 2003-2004 Mitsubishi Lancer EVO VIII. This is a great horsepower improvement kit from Injen.

2. Built from high quality mandrel-bent 6061 T6 Aluminum, Tig-Welded brackets for proper fitment with core size of 23" x 1 1 1/2" x 3".

3. Increased 14 HP and with easy installation, bolt to factory mounting points. This excellence kit comes with all necessary hardware for installation.

Injen Front Mount Intercooler Kit for Mitsubishi EVO VIII / IX 03-07

ACT HD 6 Puck Clutch Kit BMW M3 (2001-2006) ACTBM4-HDR6

1. This is the most popular heavy duty pressure kit from ACT. Use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life.

2. The four-stage heat treating process for all diaphragms are unparalleled to competitors.

3. ACT clutch rigidity and consistency are maintained with precision cover stamping.

4. Damaging torsional vibration was contained via spring centered race disc for quiter operation and to avoid failure under excessive conditions.

5. Thicker retainer stamping will provide better spring support, reduce stress concentration, increase strength and reliability.

ACT HD 6 Puck Clutch Kit BMW M3 (2001-2006) ACTBM4-HDR6

Tubi Style Louder Exhaust System w/Cats Lamborghini Countach 74-90 02010011000R

1. Material: AISI 304 SS

2. For Racetrack use only

3. Main Pipe Dimension: 60

4. Sound: +Rumore

5. End tips design: Oblique Cut

6. End tips dimension: D70

Tubi Style Louder Exhaust System w/Cats Lamborghini Countach 74-90 02010011000R

Friday, March 17, 2023

HKS Dual Muffler Exhaust for Toyota Supra GR '20+ hks31014-KT001

1. Dyno test had proven gains of 30+ HP measured internally at HKS and at external facilities, an excellence horsepower improvement for Toyota Supra GR ‘20.

2. Maintained factory valve operation function by using OEM actuator.

3. Muffler/ tip style: Ti Dual Tip, diameter of tip 4.69” (119mm).

4. Center pipe DIA 3.35” (85mm), main pipe diameter 2.76” (70mm x 2)

5. Main material: SUS304 SS

6. Noise level sport mode : 90db/idle, 66db/sport

7. Noise level stock mode: 88db/idle, 58db/ sport