WORKS BELL PADDLE SHIFTER NEO FOR 86 ZN6 ZENKI BRZ ZC6 ZENKI COPEN LA400K 540NEO
Compatible Car: 86 ZN6 ZENKI BRZ ZC6 ZENKI COPEN LA400K
Until now, vehicles equipped with an AT shift change switch on genuine steering had to give up that function when replacing the steering, but by using this "PADDLE SHIFTER NEO", it becomes functional and stylish.
You can use the function. "PADDLE SHIFTER NEO" is an evolved version of the conventional product "PADDLE SHIFTER KIT".
Carbon is used for the paddle lever, the switch stroke is quick, and the paddle body is 20mm thick, which is 30mm shorter than the conventional product. Did.
It is a product designed exclusively for each model, which is a set of "dedicated boss" and "dedicated harness".
● Carbon is used for the paddle lever.
● The switch stroke is quick.
● By making the paddle body 20 mm thick and shortening it by 30 mm from the conventional product, the steering mounting position can be offset to the vehicle side, and the boss to be combined has also been changed from a short boss to a normal boss.
● The paddle part can be adjusted by 15 mm each on the left and right according to the size of the steering and the size of the driver's hand.
● The steering mounting position varies depending on the model.
● You can change the AT gear by simply pulling the left and right paddles toward you.
● The right side of the paddle is UP ↑ and the left side is DOWN ↓. (Cannot be changed)
● It can be installed with the coupler on without processing the wiring with the attached dedicated harness (intermediate coupler).
No comments:
Post a Comment