ALPHA R35 GT-R Carbon Fiber Intake Pipes For Stock Manifold Turbos ALP.07.08.0008-1
1. The most sought Alpha R35 GT-R Carbon Fiber Cold Air Intake was designed to draw a higher volume of cool air into the stock turbochargers.
2. At same time will improve the metering capability of the factory Mass Airflow (MAF) sensors.
3. With this ALPHA intake installed, bulky air filter boxes are replaced with a high flow dry media filters and carbon fiber tubing.
4. This will eliminate clutter within the engine bay while drawing cooler air from outside.
5. Increasing the cross sectional area of the tubing allows the factory MAF sensors to accurately meter air flow up to and over 1000HP!
6. A vast improvement from ALPHA intake over the stock intake system.
7. The OEM manufacturer spends a lot of time reducing turbo noise at the expense of horsepower.
8. Allowing the turbos to ingest all the cold air they need, the ALPHA Carbon Fiber Cold Air Intake boosts power significantly.
9. You will hear the turbos spool up while bypassing valve venting, something an enthusiast like you will truly appreciate.
10. Utilize Motorsports High Temp Carbon Fiber as the intake pipes are close to the exhaust manifold for better temperature resistant.
11. Other intakes in the market use the typical gloss clear coated carbon fiber than prone to discoloration and cracking.
12. ALPHA Intakes use 3-layers of 1mm twill weave prepreg carbon fiber capable of sustaining a 240C temperature threshold.
13. At same time maintaining structural integrity and aesthetic appearance with no worry of fading or yellowing over time.
14. ALPHA Intakes are specifically designed for a hassle-free installation and maintenance.
15. Super easy installation without cutting, trimming or taking off your bumper like other aftermarket air intake.
16. Done with basic hand tools in minutes with reusable synthetic high-flow dry media filter, no longer have to purchase cheap factory paper filters.
17. The best intake in the market, for use with all stock 2 Bolt Compressor Housings.
18. Originally designed to complement Alpha 7 Performance Package that maximize the performance of the factory Nissan GTR turbos.
19. ALPHA Intake support a magnanimous horsepower well over 1000HP!
20. Couplers are compatible with factory turbo inlet pipes (2011 and older & the larger 2012+) as well as other aftermarket inlets which use the stock 2 bolt compressor/ turbo inlet suction pipe configuration.
21. Should you ever exceed the limits of the stock MAF sensors, the ALPHA R35 GTR Carbon Fiber Cold Air Intake can easily be upgraded to operate as speed density by:
- simply adding the ALPHA R35 GT-R MAF Block-Off Plates.
- ECU Tuning Required (because the pipe size offsets the calibration of the factory MAF sensor, it requires an aftermarket ECU calibration)
22. Recommend to use the Cobb AccessPort, but the intake is compatible with all other ECU calibration solutions as well.
23. With all those advantages, order your ALPHA R35 GTR Carbon Fiber Cold Air Intakes today!
24. Exclusive Benefits
- Air flow to support over 1000HP
- Polished high-temp motorsports grade carbon fiber
24. Exclusive Benefits
- Air flow to support over 1000HP
- Polished high-temp motorsports grade carbon fiber
- Easy install requiring no trimming, cutting or bumper removal
- Turbo and blow-off valve (BOV) more audible
- 4 lb. weight savings over stock
Includes:
* (76mm) diameter carbon fiber air intakes
* Alpha Performance high-flow, dry media air filters
* 5-ply reinforced silicone couplers
* All necessary hardware included
* Detailed installation instructions
- Turbo and blow-off valve (BOV) more audible
- 4 lb. weight savings over stock
Includes:
* (76mm) diameter carbon fiber air intakes
* Alpha Performance high-flow, dry media air filters
* 5-ply reinforced silicone couplers
* All necessary hardware included
* Detailed installation instructions
25. Applications
2009-2011 (CBA) Nissan R35 GT-R
2012+ (DBA) Nissan R35 GT-R
Fits all USDM, JDM and European Models (LHD & RHD)
**For use with stock turbos or upgrades with 2 bolt compressor cover/ inlets
**Notes
A. Because this intake system is hand-laid and made from a motorsports grade high temp carbon fiber, small imperfections in the carbon weave and finish will be present.
A. Because this intake system is hand-laid and made from a motorsports grade high temp carbon fiber, small imperfections in the carbon weave and finish will be present.
B. Again, these are not the typical high gloss wet carbon pieces with clear coat applied as a post process.
C. With each pipe being handmade, no two will show exactly alike.
No comments:
Post a Comment