Radium Engineering Dual Catch Can Kit S197 Shelby GT500 Fluid Lock rad20-0329-FL
1. Compatible with the 2010-2014 Shelby GT500 (S197).
2. No permanent modifications to the vehicle are required.
3. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by oil accumulation from high performance driving.
3. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by oil accumulation from high performance driving.
4. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance.
15. Shelby GT500 (S197) Catch Can Kit Details:
- Radium Engineering catch cans feature large 10AN ORB ports
5. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned.
6. A closed loop system also promotes negative crankcase pressure for optimal performance.
7. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin.
8. The dipsticks built into the catch cans allow easy inspection of accumulated fluid.
9. This kit mounts using factory holes on the chassis and integrate perfectly with the surrounding components.
10. These two oil catch cans (PCV side and Crankcase side) function completely independent of each other and are sold together.
11. They do NOT vent to atmosphere (VTA), thus are emissions and track legal.
12. No cutting, drilling or permanent modification to the vehicle is required.
13.The kit can be installed in minutes only and is easily removed for servicing.
14. The PCV catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function.
14. The PCV catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function.
- Radium Engineering catch cans feature large 10AN ORB ports
- A 4AN ORB drain port
- 2-step oil separation baffling
- An O-ring sealed dipstick
16. Kit inclusive of:
-Anodized oil catch cans with integrated condenser and dipstick
-Anodized laser cut Ford S197 specific mounting bracket
-Anodized aluminum -10AN adapter fittings and hose ends
-Enough 5/8" PCV hose for custom applications
-Stainless steel mounting hardware
-Anodized oil catch cans with integrated condenser and dipstick
-Anodized laser cut Ford S197 specific mounting bracket
-Anodized aluminum -10AN adapter fittings and hose ends
-Enough 5/8" PCV hose for custom applications
-Stainless steel mounting hardware
Note:
- Because the Radium catch cans are pressure sealed, they are great for the supercharged applications.
- The crankcase vent catch can runs inline with the crankcase breather port.
- The crankcase vent catch can runs inline with the crankcase breather port.
No comments:
Post a Comment