HPS Black Intercooler Hot Charge Pipe and Cold Side with Blue Hoses 15-17 Ford Mustang Ecoboost 2.3L Turbo 17-102WB

Vehicle Application: Fits 2015-2020 Ford Mustang Ecoboost 2.3L Turbo. 

**No modification is required during the installation. 

**Does not trigger CEL light.

**Direct OEM replacement.

1. This HPS Black Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2020 Mustang Ecoboost 2.3L Turbo OEM intercooler pipings and rubber hoses. 

2. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the OEM restrictive design. 

3. The bead rolled pipe ends prevent couplers from popping off under boost. 

4. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. 

5. The intercooler piping kit optimized and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU.

6. Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process.

**Color: Black- NOT CARB Complaint- 

**System Type: Intercooler Piping Kit (Hot and Cold Side)- 

**Compatible with OEM and aftermarket intercoolers utilizing factory OEM intercooler piping.

HPS Black Intercooler Hot Charge Pipe and Cold Side with Blue Hoses 15-17 Ford Mustang Ecoboost 2.3L Turbo 17-102WB

 

Solo Werks S1 Coilover System - Audi A4 S4 A5 S5 RS5 Allroad (B8 B8.5) 2008-2015 Quattro S1AU006

1. This is Solo Werks S1 Coilover System - Audi A4 S4 A5 S5 RS5 Allroad (B8 B8.5) 2008-2015 Quattro.

2. Application / Fitments:

• Audi A4 B8 08'-15' A4 Quattro Allroad

• Audi A4 B8 08'-15' S4

• Audi A4 B8 08'-15' Avant

• Audi A4 B8 08'-15' S4 Avant

• Audi A5 B8 07'-15' A5 Quattro

• Audi A5 B8 07'-15' S5 / RS5 

3. Lowering Range:

• Front 25-75mm (1.0-3.0) (S4 = 0.5-2.5)

• Rear 25-75mm (1.0-3.0) (S4 = 0.5-2.5)

4. Features at a Glance:

• 3-Year Limited Warranty. Warrants against Construction and Component Defects

• Heavy Gold Zinc Plated Housings. Superb Corrosion Resistance, Salt Spray tested 500 Hours)

• Twin Tube Shock Designo Gas Charged, Fixed Dampening, Independent Valves, App Specific Tuning

• High Tensile Chrome Silicon Wire Springso Light Weight, Less Stress, More Travel, Powder

coated

• Hardened Chrome Piston Rodso Mirror Finished

• Elastomer Bumpstopso Micro Cell Poly, Progressive Rate, Long Life Span

• Height Adjustable Rear Perches. Dual Lock Ring, Anodized Black Aluminum, Inc. SpannersKit 

5. Contents:

• 2x Front threaded coilover dampers (w/ dual locking spring perches)

• 2x Front spring + 2x helper spring

• 2x Rear dampers

• 2x Rear progressive rate elastomer bumpstops

• 2x Rear adjustable spring perches

• 2x Rear progressive rate spring

• 2x Spanner wrenches

• Installation Instructions

• 1oz. Bottle Boeshield T-9 Lubricant/ Protectant

6. Notes:

*All lowering ranges are approx. and will varying depending on mileage, condition, vehicle options

*Depending on the specifics on your particular wheel, wheel spacers may need to be used.

*All kits will not retain OEM Electronic Dampening Systems

Solo Werks S1 Coilover System - Audi A4 S4 A5 S5 RS5 Allroad (B8 B8.5) 2008-2015 Quattro S1AU006

ZEROFIGHTER CENTER OUT REAR END FOR HONDA CIVIC EG6 EG5 ZEROF-00439

 

ZEROFIGHTER CENTER OUT REAR END FOR HONDA CIVIC EG6 EG5 ZEROF-00439

1. Zero fighter center out rear end for Civic EG6 EG5 is a straight muffler manufactured based on abundant racing experience data in Civic. 

2. The straight structure layout eliminates unnecessary resistance and realized ideal exhaust efficiency. 

3. Zero Fighter are pretty much particular about the thickness, design angle, and caliber of stainless steel. 

4. It produces a high-pitched VTEC sound with great power just like a race car that you can not taste with a muffler made one-off.

5. Since it is a normal fuel tank compatible product, it can be installed by bolt-on as it is. 

6. This center out pipe is greatly suite to those who are worried about;

- the exhaust efficiency being poor at the circuit and unable to type up

- having trouble with the volume being unsatisfactory

- those who are longing for a straight muffler from the center

-those who are worried about replacing the muffler

Product Details:
-Material: Stainless steel (SUS304) 
-Tail end diameter: 60 pie 
-Accessories (1 rear piece for centering-Instruction manual) 
-Made in JAPAN

ZEROFIGHTER CENTER OUT REAR END FOR HONDA CIVIC EG6 EG5 ZEROF-00439

FUJITSUBO FRONT PIPE EXHAUST FOR HONDA CIVIC TYPE R FL5 610-52115

 

FUJITSUBO FRONT PIPE EXHAUST FOR HONDA CIVIC TYPE R FL5 610-52115 

Body model: 6BA-FL5
Engine model: K20C
Year: R4.9~ (2022.9~)
Pipe Diameter: Φ70.0

Fitting Parts: 

080-37001 Plate Gasket ×1
•080-36900 O-Ring Gasket O-Ring Gasket ×1
•M10 × 35mm bolt ×3
•M10 spring washer ×3
•M10 flange nut ×3

Peak Torque: 

Standard (STD): 435.1N・m (44.4kg・m)/3328rpm 

FUJITSUBO: 428.3N・m (43.7kg・m)/3300rpm

Weight:

Standard (STD): 4.5 kg 

FUJITSUBO: 3.3kg

Idling Exhaust Noise: 

Standard (STD): 70dB 

FUJITSUBO: 66 [79] dB

Proximity Exhaust Noise: 

Standard (STD): 76 dB 

FUJITSUBO: 78 [83] dB

2000RPM Exhaust Noise: 

Standard (STD): 86 dB 

FUJITSUBO: 88 [90] dB

FUJITSUBO FRONT PIPE EXHAUST FOR HONDA CIVIC TYPE R FL5 610-52115 

JUN AUTO REINFORCED CRANK MAIN CAP BOLT FOR TOYOTA 2JZ-G(T)E 1025M-T005

 

JUN AUTO REINFORCED CRANK MAIN CAP BOLT FOR TOYOTA 2JZ-G(T)E 1025M-T005

1. The crankshaft is a vital part of the internal combustion engine, and it's often called the engine's backbone. It's a rotating shaft with one or more crankpins that are driven by the pistons via connecting rods.

2. Crank Main Cap Stud Bolt is a shaft bearing part of crank shaft that fixes a block and a cap connecting together. 

3. Since 2JZ-G(T)E is a high performance engine and if this part gets thermal expansion, crank housing could not be kept in circular shape and it could be possible to get scorching. 

4. JUN Crank Main Cap Stud Kit has designed for 2JZ-G(T)E engine to diffuse the tension that usually concentrate at a point to make the most use of the screw by the cylinder head. 

5. Therefore, this is resistant to vibration and easier to lead potential-up.

6. JUN AUTO produces 2 kinds of Crank Main Cap Stud Kit; Regular Type (with no machining) and Racing Type (with machining using for stout bolts and holes).

Form: Stud
Size [mm]: Stock

**Remark: 1993-1998 Manufactured by ARP Inc.

JUN AUTO REINFORCED CRANK MAIN CAP BOLT FOR TOYOTA 2JZ-G(T)E 1025M-T005

GREDDY POWER EXTREME R FOR HONDA CIVIC TYPE R 6BA-FL5 K20C 10153302

 

GREDDY POWER EXTREME R FOR HONDA CIVIC TYPE R 6BA-FL5 K20C 10153302

■Compatible Year Model: September 2022 (Reiwa 4) onwards
■Compatible Vehicle model: 6BA-FL5 

■Specifications:
・Division/Caliber: 70φ-60φ×2/3 divisions
・Exchange area: After the front pipe
・Tail shape: 115φGTS tail
・Material: SUS
・Close-range exhaust noise: 93dB/ 3500rpm (limiter activated)
・Factory close-range exhaust noise: 81dB/ 3500rpm (limiter activated)
・Minimum ground clearance: 117mm ・Intermediate pipe (vehicles with low-down springs)

■Features:
⚫︎Dual 115φ heat gradation tails are used, creating a powerful and luxurious look with a rear style that is different from the original.
⚫︎By changing the main pipe from 70φ single to 60φ dual, the exhaust capacity is secured to cover normal, boost-up, and even turbine-replaced vehicles.
⚫︎The 60φ dual is branched from the front of the rear member, achieving a smooth exhaust flow and a distinctive rear style.
⚫︎The straight structure of the GReddy exhaust system improves exhaust efficiency.
⚫︎Complies with safety standards (acceleration noise regulations)

GREDDY POWER EXTREME R FOR HONDA CIVIC TYPE R 6BA-FL5 K20C 10153302

EXEDY HYPER MULTI TWIN FOR MITSUBISHI LANCER EVO 10 MM062SD

 

EXEDY HYPER MULTI TWIN FOR MITSUBISHI LANCER EVO 10 MM062SD

From high power tuned drag race to street usage, the EXEDY multi plate is capable of handling a variety of motor sport applications.

This is a high performance clutch plate engineered to handle excessive heat with specialized material.

**Must use genuine flywheel bolts.

COVER TYPE: PL
CLUTCH SIZE: 200
CLAMP LOAD(N): 9810
INCLUDED PARTS: -
MAXIMUM TORQUE (N.M): 800

EXEDY HYPER MULTI TWIN FOR MITSUBISHI LANCER EVO 10 MM062SD

POWER CRAFT EXHAUST MUFFLER SYSTEM FOR BMW E46 M3 P-BM510101

 

POWER CRAFT EXHAUST MUFFLER SYSTEM FOR BMW E46 M3 P-BM510101

The Power Craft Exhaust Muffler System for BMW E46 M3 (Part Number: P-BM510101) is a premium aftermarket system designed to enhance the performance, sound and aesthetics of the iconic BMW E46 M3. 

Here’s a detailed overview:

Key Features

1. Material

• SUS #442~304 Stainless Steel:

• High-quality stainless steel ensures excellent durability, corrosion resistance and a long lifespan.

• The use of #442~304 grade provides a balance between strength and weight reduction for optimized performance.

2. Specifications

• Piping Diameter: 54Φ:

• Designed to improve exhaust flow and reduce backpressure, optimizing performance and throttle response.

• Tailpipe Diameter: 76.3Φ:

• Features larger tips for a more aggressive look and improved exhaust exit.

• The Titanium Tail not only enhances aesthetics with its distinct finish but also adds lightweight durability.

3. Sound Characteristics

• Power Craft exhausts are renowned for their deep, aggressive tone with a race-inspired sound.

• Produces a sporty exhaust note under acceleration while maintaining refined acoustics during cruising.

4. Performance Gains

• Increased Horsepower and Torque: The improved exhaust flow leads to noticeable performance improvements, especially at higher RPMs.

• Weight Reduction: Lighter materials contribute to improved handling and agility.

5. Aesthetic Appeal

• The titanium tailpipes give the rear of the E46 M3 a distinctive and modernized look, emphasizing its sporty character.

6. Direct Fitment

• Specifically designed for the BMW E46 M3, ensuring a straightforward installation with no major modifications required.

Why Choose Power Craft?

• Exclusivity: Power Craft systems are not as mass-produced as some competitors, offering a sense of uniqueness.

• Customization: Known for providing options tailored to specific performance and sound preferences.

• Proven Performance: Trusted by enthusiasts for delivering measurable improvements in both power and sound.

This system is ideal for drivers seeking a noticeable improvement in both performance and style while keeping the M3’s heritage intact. 

POWER CRAFT EXHAUST MUFFLER SYSTEM FOR BMW E46 M3 P-BM510101

SPOON DRIVE SHAFT SET FOR HONDA CIVIC EP3 42300-EP3-C00

 

SPOON DRIVE SHAFT SET FOR HONDA CIVIC EP3 42300-EP3-C00

1. Many troubles of the drive shaft is due to insufficient strength of the drive shaft itself. 

2. Once the inner moving part of the drive shaft is damaged by forcible input, it will be caught constantly to create a heat sink, eventually causing seizure in a high temperature state where grease boils. 

3. Even if you strengthen the drive shaft thicker it will not be improved without internal build-in. 

4. Drive shafts are not to be reinforced, they are what they are build, from core.

5. A good drive shaft will ensure efficiency and reliability at its best for performance cars.

SPOON DRIVE SHAFT SET FOR HONDA CIVIC EP3 42300-EP3-C00

J'S RACING 65Φ SPL BIG THROTTLE FOR HONDA CIVIC EK9 B16B BSA-H5

J'S RACING 65Φ SPL BIG THROTTLE FOR HONDA CIVIC EK9 B16B BSA-H5

Material: FRP 
Butterfly caliber 65Φ Intake caliber 70Φ 

By expanding the butterfly caliber from the genuine 62.5φ to 65φ, it is possible to increase the inflow air area by about 8.2%.

 
Power & torque is surely increased in the range from low rotation to high rotation. 

You can use it from the street to the circuit regardless of the stage.

J'S RACING 65Φ SPL BIG THROTTLE FOR HONDA CIVIC EK9 B16B BSA-H5

 

APP BRAKE LINE SYSTEM STEEL FITTING FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF FB704-ST

 

APP BRAKE LINE SYSTEM STEEL FITTING FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF FB704-ST

1. The genuine rubber brake hose expands a lot when pressurized and cannot transmit 100% of the pressure generated by the master cylinder to the caliper. 

2. By using a stainless steel mesh brake line, the expansion is reduced and the pedal stroke is shorter to make it works better. 

3. You can feel a click when you step on brake, a must-have for sports driving where you delay braking before the corner and control it just before locking. 

4. This may seem unnecessary for normal driving but you can feel the difference and better enhancement even during normal driving. 

5. In particular, minivans, SUVs, and RVs have long brake hoses, so it is easy to feel the difference. 

6. It is even more effective in situations where the brakes are under strain (high speeds, downhill, passengers and luggage, and increased weight due to inch-up). 

7. In addition, it allows safety devices such as ABS and brake assist to function fully, which improves safety in emergencies. 

APP BRAKE LINE SYSTEM STEEL FITTING FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF FB704-ST

GRUPPEM RAM AIR SYSTEM FOR BMW Z4 LM30 FRI-0325

 

GRUPPEM RAM AIR SYSTEM FOR BMW Z4 LM30 FRI-0325

Compatible Engine: N54B30A

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower and stabilize the intake air temperature. 

Achieves torque and power-up in the entire range from low to high revs. You can also enjoy the sporty intake sound. 

Installation is bolt-on with a dedicated fitting adapter. 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: E89 
Displacement: 3.0 LITER 
Grade / Specifications: S DRIVE 35I TWIN TURBO

GRUPPEM RAM AIR SYSTEM FOR BMW Z4 LM30 FRI-0325