Corsa 2020 Corvette C8 3in Xtreme Cat-Back Exhaust 4.5in Pol Quad Tips - Integrates stock AFM Valve cor21102

1. This is CORSA Performance AFM Only Corvette C8 Exhaust. 

2. The refined Track Series Exhaust. Like the CORSA performance C8 Track Series exhaust, this system is made for drivers seeking an ultra-aggressive exhaust note without resonance caused by 4 cylinder economy mode operation.

3. CORSA's AFM Only C8 cat back exhaust systems is designed to eliminate restrictions, maximize weight savings and bring the noise while eliminating resonance from 4 cylinder mode. 

4. Each system has been Track-Tested and Dyno proven to maximize performance producing up to 19 HP and 16 LBS Ft. of torque.

5. On top of that, shaving 25 pounds from the stock exhaust system.

Corsa 2020 Corvette C8 3in Xtreme Cat-Back Exhaust 4.5in Pol Quad Tips - Integrates stock AFM Valve cor21102

REVOLUTION CRAFT SQUARE TOURING COMPETITION (TC) MIRROR (ZN6/ZC6) FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-CTCM

 

REVOLUTION CRAFT SQUARE TOURING COMPETITION (TC) MIRROR (ZN6/ZC6) FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-CTCM

Compatible Car: TOYOTA 86 SUBARU BRZ ZN6 ZC6

1. With the release of the Super GT race model TCA140, the TCA mirror is an option only for the 500R. 

2. Compatibility: All types of TCA mirrors (ZN6/ZC6) 

3. Weight is 360g on one side.

REVOLUTION CRAFT SQUARE TOURING COMPETITION (TC) MIRROR (ZN6/ZC6) FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-CTCM

HKS CONROD SET H-BEAM FOR GT-R VR38DETT 23004-AN006

 

HKS CONROD SET H-BEAM FOR GT-R VR38DETT 23004-AN006

Product: CONROD SET VR38DETT (H-BEAM)

Compatible Car: GT-R

Compatible Engine: VR38DETT

**Remark: STEP 3

HKS CONROD SET H-BEAM FOR GT-R VR38DETT 23004-AN006

KANSAI SERVICE CARBON AIR DUCT FOR MITSUBISHI LANCER EVOLUTION X CZ4A KPM030

 

KANSAI SERVICE CARBON AIR DUCT FOR MITSUBISHI LANCER EVOLUTION X CZ4A KPM030

Compatible Car: MITSUBISHI LANCER EVOLUTION X CZ4A

Ultimate intake layout:

1. Carbon air duct that shuts off the hot air in the engine room when using HKS racing suction. 

2. In addition to improve the output that accompanies the increase in suction efficiency.

3. Lowering the suction temperature makes it possible to safely and efficiently increase the power response. 

■ Material Twill Wet Carbon & FRP 

KANSAI SERVICE CARBON AIR DUCT FOR MITSUBISHI LANCER EVOLUTION X CZ4A KPM030

 

CSF 04-13 BMW 335i/xi (E90/E91/E92/E93) High Performance Intercooler - Black csf8127B

High-Performance N54 Intercooler - BLACK

CSF #8127B 

• The Only TRUE Plug-and-Play Solution Compared to the Rest
• No Cheaper Silicone Hose Clamp System, BMW Style “Quick-Connect” Machined Fittings
• OEM Mounting Locations with Fitment Kit and Instructions Included
• Clears OEM Crash Bar, No Modification to Install with No Cutting or Trimming Required
• Bottom/Larger: Section: 5.5” Thick (140mm)
• Massive Front Face: ~8.25” Tall (210mm)
• Good for Over 1000 HP!

CSF 04-13 BMW 335i/xi (E90/E91/E92/E93) High Performance Intercooler - Black csf8127B

GREDDY COMFORT SPORTS GTS VER.3 EXHAUST FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 F24A 10110738

 

GREDDY COMFORT SPORTS GTS VER.3 EXHAUST FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 F24A 10110738

Year Model: 2021.10~ / 2021.08~ 

Product features: 

●4-piece muffler for cars equipped with GR muffler garnish or GR rear bumper spoiler. ●Adopts a well-established straight structure that pursues exhaust efficiency. 

●High-impact dual 4-bar design with GReddy logo plate attached to the rear silencer, creating an even more dress-up and luxurious feel. 

●By replacing only the rear part, there is no noise in the room, and we have pursued a pleasant and comfortable volume and sound quality. 

Specifications:

・Compliant with 2010 noise regulations 

・Proximity exhaust noise: Right 87dB, Left 85dB/5250rpm 

・Genuine proximity exhaust noise: Right 83dB, Left 83dB/5250rpm

・Minimum ground clearance: 145mm [main silencer part] 

・Division / Diameter: 60φ / 1 division 

・Replacement part: Rear part only 

・Tail shape: 102φGTS 

・Material: SUS Contents: Muffler body gasket 10×35mm set bolt

GREDDY COMFORT SPORTS GTS VER.3 EXHAUST FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 F24A 10110738

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

 

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

1. SPOON has been developing the 10th CIVIC HATCHBACK 1.5L TURBO (FK7) since its release. The first goal is to go for total tuning to demonstrate driving performance that surpasses TYPE R (FK8). 

2. The process was pursued, believing the extent of tuning growth and the potential of the L15C 1.5 HONDA TURBO engine. 

3. By introducing Hondata Flashpro, it is possible to achieve a maximum output of 250 ps (STD 182 ps) and a maximum torque of 38 kgf ・ m (STD 24.5 kgf ・ m) with precise setting and with a high torque of about 50% up from STD. 

4. Indeed, the corresponding torque of the STD clutch was found to become a barrier to realize it true potential.

5. On this basis, SPOON has developed clutch discs and covers that use high-strength fiber material to achieve the high heat resistance and high strength required.

6. The dual mass structure adopted in the genuine flywheel is utilized and the clutch pedal depression force is suppressed to about 10% up to STD, making it ideal for street use emphasis on operability and efficiency.

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

 

Garrett 2015+ Subaru WRX FA20F 2.0L Air / Air Intercooler - 530HP grt891185-6001

**The Garrett 2015+ Subaru WRX FA20F 2.0L Air-to-Air Intercooler - 530HP

Enhance your Subaru WRX’s performance with the Garrett direct-fit charge air cooler, engineered for the 2015+ Subaru WRX FA20F 2.0L. 

This high-performance intercooler offers cutting-edge technology, seamless installation, and a significant boost in power and efficiency.

Key Features of the Garrett WRX Intercooler:

1. Supports up to 530 Horsepower: Designed for high-performance applications, the intercooler delivers an impressive power gain.

2. 70% Larger Core: Features a bar-and-plate construction with a 70% larger aluminum core than the stock unit, ensuring better cooling capacity.

3. Advanced End Tanks: Optimized cast aluminum end tanks reduce turbulence and improve airflow for maximum efficiency.

4. Improved Performance Gains:

• Up to 16 HP (12 kW) and 15 lb-ft (20 N-m) of torque increase.

• Average 30 °F (16.7 °C) reduction in intake manifold temperature for cooler, denser air.

5. Durable Construction:

• Bar-and-plate design with advanced offset fin technology.

• TIG-welded for strength and reliability.

• Vacuum-brazed to withstand extreme conditions.

6. Easy Installation: This direct-fit intercooler installs in 1 hour, reusing OEM bolts, clamps, and hoses. Trimming of the engine cover is required for proper fitment.

Proven Performance

• Dyno Testing Results:

• Delivers up to 16 HP and 15 lb-ft torque gains.

• Heat Saturation Resistance: Maintains cooling efficiency even during back-to-back runs in wind tunnel simulations.

• Airflow Optimization: Reduces intake manifold temperatures by an average of 30 °F, ensuring consistent performance under real-world driving conditions.

Upgrade your 2015+ Subaru WRX FA20F with the Garrett Air-to-Air Intercooler and experience unmatched power, durability, and cooling efficiency. 

Perfect for enthusiasts seeking a balance of reliability and top-tier performance.

Garrett 2015+ Subaru WRX FA20F 2.0L Air / Air Intercooler - 530HP grt891185-6001

 

REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips remRK-C2063H-11

1. This is REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips.

2. This is a full 304 stainless steel catback system designed to replace the original factory exhaust. 

3. This system is developed specifically for the 2022+ Civic Sport Sedan with 2.0L NA engine. 

4. The original single exit exhaust is converted to a dual exit with 4.0 inch tip on both driver and passenger side. 

5. It features REMARK LINK LOOP design to control the exhaust note and provide an aggressive tone. 

6. This system does eliminates the OE muffler and is on the louder side of the spectrum. 

7. It does give the burbles on deceleration that many CIVIC enthusiasts enjoy. If you are looking for something on the quieter side, check out REMARK Sports Touring single exit for the Sport Sedan.

8. Includes 2.5" resonated midpipe which splits to dual 2.5" Link Loops and finishes with 4" tips. Offered in polished or burnt finish stainless steel tips. 

9. Each system is precisely constructed and fully TIG welded by REMARK master craftsmen. 

10. INCLUDED with kit Mounting bracket and additional rubber exhaust hanger for the driver's side section of the exhaust as well as the OE Honda plastic driver's side exhaust trim from the Si model. This allows for a complete bolt-on system. 

11. A small amount of trimming is required to the bottom of the rear bumper to allow clearance for the exhaust hanger bracket. See the install guide. 

Part Number Stainless Steel: 

**RK-C2063H-11 

**Year/Make/Model 2022+ Honda Civic Sport Sedan [FE2] 

**Chassis / Engine FE2, 2.0L NA Exhaust **Type Catback System, 4pc design Piping Diameter 2.5" mandrel bent piping to Y-pipe 2.5" to REMARK Link Loop design 

**Tip Diameter Dual 4inch exit slant cut tips (one on each side) 

**Piping Material Full T304 Stainless Steel **Muffler Material Full T304 Stainless **Steel Muffler Tip Material Full T304 **Stainless Steel Welding Hand crafted high quality TIG welding 

**Weight Mid-Pipe Resonated

REMARK 2022+ Honda Civic Sport Sedan (FE2) Catback Exhaust - Dual Stainless Steel Tips remRK-C2063H-11

 

BLOX Racing Performance Intake Manifold for 1994-2001 Acura Integra GS-R bloBXIM-10100-V3

1. The BLOX Racing Performance Intake Manifold features a larger plenum and longer runners that significantly increase the engine’s incoming airflow and volume, compared to the factory and some other aftermarket units. 

2. Each intake manifold has been balanced, pressure tested and tuned to create more usable horsepower across a wider RPM range. 

3. All BLOX Racing Performance Intake Manifolds are designed to accept factory or aftermarket throttle bodies, and reuse all factory sensors. 

4. BLOX Racing Performance Intake Manifolds are cast using the latest in gravity casting technology, which helps create a smoother internal plenum and runners. 

5. The intake manifold’s overall weight is also greatly reduced. In addition, the IAC port has been relocated in order to accommodate throttle body match-porting up to 72mm. 

6. To add a distinct look, the intake manifold now features a raised nameplate and included BLOX Racing product badge. 

7. The BLOX Racing Version 3 intake manifold features pre-drilled holes on the nameplate that accommodates the new BLOX Racing surface-mount vacuum block. 

8. The surface-mount vacuum block easily bolts on top of the nameplate providing a clean and hassle-free installation. 

9. However, the name badge can be applied if a vacuum block is not used. The surface-mount vacuum block provides additional sources of vacuum and can be mounted on to any flat surface. Vacuum blocks are sold separately. 

10. For maximum results, use with a BLOX Racing cast or billet throttle body, air filter and velocity stack.

BLOX Racing Performance Intake Manifold for 1994-2001 Acura Integra GS-R bloBXIM-10100-V3

 

HPS Performance Shortram Air Intake Kit 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7), Includes Heat Shield, Red 827-676R-1

1. This intake is designed for 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7).

2. Delivers dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. 

3. Fine-tuned by HPS Performance to deliver the maximum performance output through the top end power band- 

4. Features HPS Performance signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps- 4 inch mandrel-bent aluminum tube 

5. Replaces stock restrictive air box and optimizes the airflow with excellent heat dissipation and long lasting durability- 

6. Powder coated steel heat shields integrate with fresh air scoops direct cool air to the air filter for the best cooling effect.

- Includes the All-New HPS Performance Air Filter (Washable and Reusable). 

- HPS Performance Air Filter Part Number: HPS-4300

- Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process.

- No modification is required during the installation.

- Aluminum Tubing Color: Red

- NOT CARB Compliant

- System Type: 827 Series 

- Performance Air Intake Kit with Heat Shield. Manufacturer Part Number: 827-676R- 

HPS Performance Shortram Air Intake Kit 2012-2015 Audi A6 Quattro 3.0L Supercharged (C7), Includes Heat Shield, Red 827-676R-1

 

Tick Performance Polyurethane 12mm Torque Tube Bushing for 2009-2013 Corvette ZR1 & 2014-2019 Corvette TPTTB-002

1. Tick Performance Polyurethane 12mm Torque Tube Bushings (also known as a driveshaft coupler) reduce drivetrain loss without sacrificing streetability. 

2. The Polyurethane construction allowing for a more rigid and stronger driveshaft assembly. 

3. The Polyurethane coupler significantly reduces common failure issues plagued by OEM GM rubber bushings and provides the driver with better vehicle feedback.

4. Fits: 2009-13 C6 Corvette ZR12014-19 C7 Corvettes (Stingray, Grand Sport, Z06 and ZR1) with 12mm Hardware

5. Benefits:

*Reduces drivetrain loss

*Improves Clutch Engagement Feedback

*Significantly Reduces Failure Issues Caused By OEM Rubber 

Torque Tube Bushings Polyurethane *Priced Individually

Tick Performance Polyurethane 12mm Torque Tube Bushing for 2009-2013 Corvette ZR1 & 2014-2019 Corvette TPTTB-002