STI TIMING BELT FOR SUBARU WRX STI (VA) ST130284S000

 

STI TIMING BELT FOR SUBARU WRX STI (VA) ST130284S000

1. This STI Timing Belt was specialized for EJ20 boxer DOHC engines. 

2. This STI Timing Belt was developed based on motor sports specifications and uses the same materials as for Impress WR cars that participate in the World Rally Championship (WRC).

3. Improvements have been made in heat resistance and strength against tooth slippage, to control belt elongation. 

4. It was reinforced for racing purposes, however it can also be used for street driving for better performance.

5. Belt noise might be produced. 

** This product requires a V belt for the A / C compressor (SUBARU genuine part for each vehicle). 

** The explanation of this product is for Japanese specification.

STI TIMING BELT FOR SUBARU WRX STI (VA) ST130284S000

TOMEI TI RACING EXHAUST FOR NISSAN FAIRLADY Z HR Z33 350Z VQ35DE 441004

 

TOMEI TI RACING EXHAUST FOR NISSAN FAIRLADY Z HR Z33 350Z VQ35DE 441004

1. TOMEI TI Racing Exhaust was designed not to sacrifice ground clearance on lowered vehicles by the optimized piping layout.

2. The new design joint flange on the center pipe is narrowing-free design that makes true straight-through 80mm system without any restrictions when combined with the new Ti RACING Mid Y-Pipe.

3. The TOMEI Ti RACING Titanium Exhaust series has been designed to improve total performance while reducing the sound as much as to meet the sound regulation at the tracks.

4. Meanwhile, the EXPREME Ti series has been designed just to unleash engine’s true potential and improve the total performance.

TOMEI TI RACING EXHAUST FOR NISSAN FAIRLADY Z HR Z33 350Z VQ35DE 441004

HKS POWER EDITOR FOR TOYOTA GR SUPRA DB22 42018-AT015

 

HKS POWER EDITOR FOR TOYOTA GR SUPRA DB22 42018-AT015

Year Mode: 19/05-
Engine: B48

1. This is the next-generation boost controller for Supra DB22 from HKS.

2. It enables boost-up of turbo cars that use electric or negative pressure control type actuators that cannot be controlled by conventional boost controllers.

3. Smoothen B48 operations for better performance and experience.

HKS POWER EDITOR FOR TOYOTA GR SUPRA DB22 42018-AT015

STI GEAR SHIFT LEVER MT FOR SUBARU BRZ ZD8 SG117CC000

 

STI GEAR SHIFT LEVER MT FOR SUBARU BRZ ZD8 SG117CC000

1. Suitable for sports cars with a short stroke gear shift lever assembly that pursues quick shift works.

2. By changing the lever ratio and devising the joint part, the stroke amount in the front and rear directions has been shortened by 4 mm. 

3. This provides a quicker and more direct shift feeling.

STI GEAR SHIFT LEVER MT FOR SUBARU BRZ ZD8 SG117CC000

RS-R SUSPENSION TI2000 SUPER DOWN 1SET FOR HONDA CIVIC TYPE R FK8 FF H059TS

 

RS-R SUSPENSION TI2000 SUPER DOWN 1SET FOR HONDA CIVIC TYPE R FK8 FF H059TS

Compatible Car: HONDA CIVIC TYPE R FK8 FF

Model Year: 2017/9 ~ 

ENGINE CAPACITY: 2000 TB 

Series: Ti2000 SUPER DOWN 

Set: 1Set 
down width (mm): - 
spring rate (kg / mm): - 
matching grade: type R

RS-R SUSPENSION TI2000 SUPER DOWN 1SET FOR HONDA CIVIC TYPE R FK8 FF H059TS

HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

 

HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

Compatible Car: Toyota 86 ZN6

Compatible Engine: FA20

Only for 6MT (Applied A-D). Emission test certificate provided. Complied with 2010 noise regulation.

The HKS Super Manifold R-Spec + Hi-Power Spec-L for the Toyota 86 ZN6 with the FA20 engine (part number 32025-AT001) is a performance upgrade designed to enhance the engine’s efficiency, power output, and overall exhaust flow. 

Here’s a breakdown of what this kit offers:

1. Super Manifold R-Spec:

This is a high-performance intake manifold designed to optimize airflow into the engine. The R-Spec manifold is crafted for those looking to extract more power from the FA20 engine by reducing intake resistance and improving air distribution to each cylinder. It typically features a larger, more efficient plenum design and smoother airflow paths, which contributes to an increase in engine response and power.

2. Hi-Power Spec-L Exhaust System:

The Hi-Power Spec-L exhaust system is designed for better exhaust flow, typically focusing on reduced backpressure, which helps the engine expel exhaust gases more efficiently. This allows for improved power and performance, particularly in high-revving situations. The Spec-L version is usually lighter and features a more aggressive tone while still maintaining a level of daily-driveability.

Together, these two components (intake manifold and exhaust system) create a package that can significantly improve the performance of the Toyota 86 ZN6, particularly when paired with other supporting mods like an upgraded tune, forced induction, or other engine internals.

This combination is typically aimed at enthusiasts looking for a more aggressive and high-performance setup while maintaining reliability for street use.

HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

 

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

***Compatible Car: TOYOTA GR86 ZN8 SUBARU BRZ ZD8

1. This is an LSD from CSOHARA with an initial setting that has a small rate of change and is highly sustainable. 

2. This LSD support mechanism that is neither a disc spring nor a cam spring.

3. The basic setting is 2WAY/1.5WAY and it is seasoned with the image of the effect of being an extension of the genuine LSD, which dislikes ABS, TRC and VSC intervention.

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

 

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

Type: IV 
Model Year: 01 / 07- 
Chassis Model: GF-1JAUM 
Product Name: THROTTLE CONTROLLER 

Description: 

1. Possible freely controlled accelerator response of the electronic controlled throttle equipped vehicles controller. 

2. Blitz by its own control, sharp response from the sluggish resolved at the time of start, achieve up to eco-driving. 

3. Newly adopted controller with high visibility VA mode liquid crystal, the main unit, product mix by type of vehicle harness. 

4. All uniform by model-only package those required for installation. "Eco mode", "sports mode", "Auto mode" for a total of 20 mode of the standard equipment. 

5. Control method and characteristics are different various modes, you realize there was feeling to your liking. 

6. From among the 20 modes, it was equipped with a "simple mode function" to display only 5 mode of your choice that frequently used. 

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

 

HPS Red Shortram Air Intake + Heat Shield for 15-17 Volkswagen GTI MK7 2.0T TSI Turbo 827-577R-1

** The HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. 

1. The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-577R) for 2015-2020 Volkswagen GTI 2.0T TSI Turbo offers:

A) A free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains.

B) Increase horsepower +8.2 whp , torque +11.9 ft/lbs and improve throttle response while maintaining safe air fuel ratio. 

2. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. 

3. The kit does NOT require tuning and does not trigger CEL light. 

4. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. 

5. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. 

6. All HPS Performance Air filter are made in the United States.

7. Includes the All-New HPS Performance Air Filter (Washable and Reusable). HPS Performance Air Filter Part Number: HPS-4276- 

8. Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process. 

9. Aluminum Tubing Color: Red- NOT CARB Complaint- System Type: 827 Series - Performance Air Intake Kit with Heat Shield. Manufacturer Part Number: 827-577R- 

** HPS Performance Air Filter Key Features

Woven cotton filter element- Traps dirt up to 5 microns. Superior airflow without sacrificing filtration.- Washable and reusable, saving you money down the line.

Specially formulated light-weight synthetic oil- Creates an ionic bond with the filter's stainless steel mesh.- Attracts and traps dirt onto the mesh, creating a clear path for airflow.- Will not affect or damage sensors.

Stainless steel mesh reinforcement- Higher resistance to dents over aluminum mesh.

Low pressure injection molding- Effectively minimizes seepage of rubber onto filter element.- Increases airflow by up to 25% compared to high pressure molding.

Manufactured in the USA by Green Filter- Green Filter is the leading manufacturer of world-class filter used by many of the world renowned racing engineers, engine builders, drivers and enthusiasts that regularly "win on Sunday"

Note: All HPS Performance Air filter are designed with performance in mind, and backed by HPS One-Year Limited Warranty.

HPS Red Shortram Air Intake + Heat Shield for 15-17 Volkswagen GTI MK7 2.0T TSI Turbo 827-577R-1

 

Forge Motorsports VW Golf Mk7 GTi 2.0 Silicone Coolant Hose Kit FMKCMK7

Fitment:

Volkswagen Golf MK7 GTI 

Volkswagen Golf MK7 GTI Clubsport ED40 

Volkswagen Golf MK7 R 

Volkswagen Golf MK7.5 GTI 

Volkswagen Golf MK7.5 R

1. This is a set of silicone coolant hoses for the VW Golf MK7 GTi 2.0TSI engine.

2. These hoses are Fluro-silicone lined to allow safe use with OAT type coolants.

3. Available in Red/ Blue and Black. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. 

4. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. 

5. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.

6. The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. 

**Lifetime warranty, T&Cs apply.

Forge Motorsports VW Golf Mk7 GTi 2.0 Silicone Coolant Hose Kit FMKCMK7

 

Forge Motorsports Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards FMDV32A

1. This is a replacement for OEM Part Number 06N.145.710.B.

2. Forge Motorsports valve utilized full billet alloy construction with a piston based internal design gives significant improved reliability over the OEM valves with lightning-fast response. 

3. It has also been proven in performance cars running over 600bhp.

4. Fitment:

Audi A4 2.0 TSI 2021 

Audi S3 2.0TSI (8Y Chassis) 

Audi S3 Sportback 2.0TSI (8Y Chassis)

Cupra Formentor VZ2  Seat 

Cupra Formentor VZ2 

Volkswagen Golf MK8 GTI 

Volkswagen Golf MK8 R

5. Forge Motorsports recommend servicing your valve every 3 years or 20,000 miles, whichever comes sooner.

6. Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). 

7. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance and absolutely NO fault codes or check engine lights.

8. This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. 

9. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. 

10. This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter.

11. The older larger valves and sandwich plates will not fit this engine.

12. In The Box: 

1 x FMDV32 Valve 1 x Wiring Harness 1 x Solenoid, Bracket, and Screws 1 x Blue Spring (Uprated) 1 x 5mm Brass T Piece 12 x Cable Ties 1 x 1500mm Length of 4mm Vac Hose 1 x Forge Keyring and Sticker

Forge Motorsports Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards FMDV32A

 

AWE Tuning 2015+ Dodge Challenger 6.4L/6.2L Supercharged Track Edition Exhaust - Use Stock Tips awe3015-11050

1. This a rage, amplified “Track Edition” AWE Tuning exhaust for your supercharged Dodge Challenger 6.4L/ 6.2L.

2. For those who like it raw and rowdy, this Track Edition is for you to scale tracks with better performance.

3. The Track Edition shares the same integrated H-pipe and precision engineering as its Touring Edition counterpart, minus AWE's patented drone-canceling solution, 180 Technology. 

4. In place of the 180 Technology resonator in the rear, lies a Track Edition straight section. As a result, this version is known to get (really) rowdy in mid-range acceleration and deceleration and may be too much for many. 

5. Due to this reason, AWE Track Edition Exhausts cannot be returned based on sound preference. You've been warned here.

6. But fear not, if it gets too rowdy, AWE made it easy to convert between Track and Touring Editions through the purchase of a simple Conversion Kit to change your volume.

7. All options are available with 4" double-walled slash-cut tips in either Diamond Black or Chrome Silver, as well as fitments to retain the OEM tips.

AWE Tuning 2015+ Dodge Challenger 6.4L/6.2L Supercharged Track Edition Exhaust - Use Stock Tips awe3015-11050

 

Couture M Speed Front Bumper for Mazda Miata 2006-2008 EXD113797

1. This is 2006-2008 Mazda Miata Couture Urethane M Speed Front Bumper - 1 Piece.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Couture M Speed Front Bumper for Mazda Miata 2006-2008 EXD113797

 

ECU Masters PNP for EMU Black for Lexus IS300 2001 GS300 '98-'01 WHPIS3001

1. This plug and play adapter harness allows for the installation of an EMU Black in a 2001 IS300 and 98-01 GS300 also JZS161 Aristo, JSX110 and JZS171. 

2. This is a parallel harness, meaning that the original ECU is retained to control the automatic transmission (if applicable). 

3. The ETSC-i throttle body must remain connected to the stock ECU to correctly control the automatic transmission. 

4. For this reason, the EMU will not have control of the ETSC-i TB. Adapter works for both manual and automatic vehicles), dash cluster, HVAC and throttle body. 

What's included?

• Adapter harness
• Intake Air Temp Sensor Kit
• Bosch 4.9 Wideband O2 sensor

Use ONLY the specific Lexus IS300 base map in the Base Maps and Manuals drive. 

ECU Masters PNP for EMU Black for Lexus IS300 2001 GS300 '98-'01 WHPIS3001

 

Couture R32 Sideskirts for Volkswagen GTI 1999-2005 EXD102594

**This is 1999-2005 Volkswagen Golf GTI 2DR Couture Urethane R32 Side Skirts Rocker Panels - 2 Piece

Note: 

1. Couture r32 side skirts are designed for 2dr models only.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Couture R32 Sideskirts for Volkswagen GTI 1999-2005 EXD102594