Duraflex M3 Look Fender for BMW 3 Series 2012-2018 EXD112509

1. 2012-2018 BMW 3 Series F30 Duraflex M3 Look Front Fenders - 4 Piece

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex M3 Look Fender for BMW 3 Series 2012-2018 EXD112509

 

ACT Race Twin-Disc kit for the 03-05 Dodge SRT-4 ACTT1RR-D02

1. ACT Race Twin-Disc kits are race-ready for the serious enthusiast who needs a direct bolt-in kit, requiring no additional modifications. 

2. ACT Race Twin-Disc kit for the 03-05 Dodge SRT-4 with it sintered iron race discs offer the highest torque capacity of all ACT race discs and have ultra-high heat capacity. 

3. Most kits offer pedal loads 10-20% higher than stock, yet increasing the clamp load by 80-90%. 

4. All ACT twin disc kits include a CNC-machined and dynamically balanced flywheel for trouble free use. All kits undergo an exclusive four-stage, heat-treating process on all diaphragms. 

5. ACT twin disc kits include a pressure plate, two discs, floater, flywheel and alignment tool. 

6. Some kits may include a pilot bearing and release bearing. This ACT Race Twin-Disc kit for the 03-05 Dodge SRT-4 meets SFI Specification 1.2.

ACT Race Twin-Disc kit for the 03-05 Dodge SRT-4 ACTT1RR-D02

 

aFe Black Series Dynamic Air Scoop for BMW M5 (F90) 18-20 V8-4.4L (t) S63 afe58-10005SC

**Your airflow path will be improved by directly replace your restrictive factory inlet ducts with this aFe larger carbon fiber air scoops.

• 1. It is lightweight with 100% Twill Weave Carbon Fiber Construction.
• 2. Easy installation into Factory Inlet Ducts and Mounts onto V-Support Brace with no extra hardware.
• 3. Comprise of set of two (Driver and Passenger Side), visible behind grille for an aggressive and sporty appearance.
• 
  

aFe Black Series Dynamic Air Scoop for BMW M5 (F90) 18-20 V8-4.4L (t) S63 afe58-10005SC

 

Eventuri Filter Cleaning Kit eveEVE-FLC

Filters are recommended to be cleaned every 5000 km with either compressed air or with a Eventuri cleaning kit.

Eventuri Filter Cleaning Kit eveEVE-FLC

 

Funk Motorsports BMW S55 Turbo & Manifold Blanket (M2, M3, M4) (PAIR) Titanium Weave FUNK-TBTS55-TI

**BMW M2 / M3 / M4 S55 TURBO BLANKET | Titanium Weave

1. Funk Motorsport developed turbo & manifold blanket to improve performance, protection and reliability for your F80 BMW M3.

•Industry leading construction of turbo blanket.

• Reduce temperatures by up to 90%.

• Available in both Titanium and Carbon Fibre.

2. Improve gas flow and increase performance; insulate the hot side of the turbo and retain the heat within the exhaust gases themselves.

3. Hotter gases accelerate faster leading to them leaving the system sooner improving spool up and throttle response. 

4. Insulating the hot side of your turbo also helps to lower the amount of heat from the turbo that dissipates into the engine bay and intake pipework.

5. A cooler air intake resulted in higher oxygen density for higher performance and more consistent power figures over time.

6. Gives better protection as turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can damaging sensitive components. 

7. Turbo blanket will turbo from oil lines, coolant lines and the like, even bodywork positioned close to the turbo from the dangers of excess heat.

8. Gives better reliability for your F80 BMW M3 turbo to reduce excess heat within your engine bay that may improve the reliability of electronics, temperature of coolant, fuel and oil lines.

9. Built with great technicalities:

– Specifically developed thread construction to for exceptional durability. The Funk new fireproof ultra-high temperature Stainless Steel thread is around 1mm in diameter and can withstand temperatures in excess of 1300°C.

– New, thicker internal heat lagging insulation to provide up to 3x improved heat reduction created from ceramic silica complex matting to improve durability over prolonged heat cycles.

– 4-layer construction for improved reliability.

– Uprated external Carbon Fibre twill and Titanium twill for an improved aesthetic and more durable finish.

– ROHS tested and approved to ensure compliance and desired parameters are reached within our material selection.

Note of caution:

**This turbo blanket is not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. 

**Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. 

**Funk Motorsport take no responsibility for fluid contamination our products.

Funk Motorsports BMW S55 Turbo & Manifold Blanket (M2, M3, M4) (PAIR) Titanium Weave FUNK-TBTS55-TI

 

Aero Function AF-1 Rear Lip/Add On for Porsche 997 2005-2008 EXD108521

**2005-2008 Porsche 911 Carrera 997 Carrera Carbon AF-1 Rear Diffuser ( CFP ) - 1 Piece

Note: 

1. Will not fit turbo models

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-1 Rear Lip/Add On for Porsche 997 2005-2008 EXD108521

 

Aero Function AF-5 Fender Flare for BMW M3 2008-2013 EXD112894

** This is a 2008-2013 BMW M3 E92 2DR Coupe AF-5 Wide Body Rear Fender Flares ( GFK ) - 2 Piece

Note: 

1. Must be used in conjunction with entire AF-5 wide body kit.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-5 Fender Flare for BMW M3 2008-2013 EXD112894

 

HKS GTIII RS SPORT TURBINE KIT JZX100 1JZGTE VVTI only hks11004-AT004

1. What is GT III Turbine?

"GT III Turbine" is a new generation of turbo combining MHI brand CHRA with HKS original housings. It was designed from HKS vast experiences accumulated over many-many years.

2. Issues that accelerate improve turbo technologies?

Recent requirements towards fuel efficiency and emissions control has accelerated the development of turbo technology. A high efficiency unit with high boost at low air flow + preventing surging is realized.

 

3. What are the advantages of GT III Turbine?

HKS innovation on technology, experience and know how. Exceptional design which minimizes surging is realized through "Made in Japan" manufacturing quality with domestic made casts machined and finished within HKS facilities.

 4. What are the true benefits of GT III Turbine?

High versatile turbo. The combination of the ultimate turbine blades and its optimal housing creates an amazingly versatile turbo. High output, high response turbo tends to suffer with surging. GTIII Turbine minimizes surging and easy to use with flexible setup. A thrust bearing type turbo but with high response that compatible with ball bearing setup.

HKS GTIII RS SPORT TURBINE KIT JZX100 1JZGTE VVTI only hks11004-AT004

 

Corsa 19-21 Challenger SRTHellcatDemonRedeye 2.75in Valved CB DRE w Twin 3.5in Pol Blk PVD Tips cor21070BLK

1. CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology gives a drone free exhaust experience, styled specifically to fit the personality of your vehicle. 

2. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE exhaust note under acceleration and a DRONE-FREE EXPERIENCE during cruise. 

3. This system features a CORSA Performance engineered valve assembly that meshes seamlessly to the vehicle's stock actuator to retain flawless functionality of the Active valved exhaust system. 

4. Performance gains are not affected by sound choice.

Corsa 19-21 Challenger SRTHellcatDemonRedeye 2.75in Valved CB DRE w Twin 3.5in Pol Blk PVD Tips cor21070BLK

 

Anderson Composites REAR DIFFUSER FORD SHELBY GT500 GT500 2020-2022 AC-RL20FDMU500

1. Anderson Composites VIP carbon fiber parts are manufactured by spraying a coat of resin on the mold.

2. Then sheets of carbon fiber fabric are laid out across the mold and then a final coat of resin is applied on the fabric before being placed inside a vacuum sealed bag to cure (provides an excellent fabric-to-resin ratio). 

3. Once cured, the part is removed from the mold, trimmed and a final coat of gel coat applied and polished to protect the surface and increase the high luster finish. 

4. No additional clear coat is required.

5. Fits 20-22 Shelby GT500, 2021-2023 Mach 1

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Mounting tabs and mounting surface of diffuser may require modifications for correct fitment; minor adjustments may be necessary as part of the normal installation process

*Rear bumper needs to be removed for proper installation

*Additional clips and hardware may be required to optimize installation

*Shipped via ground truck freight only

*Anderson Composites is a supplier of carbon fiber products for Ford Performance Parts.

Anderson Composites REAR DIFFUSER FORD SHELBY GT500 GT500 2020-2022 AC-RL20FDMU500

 

JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket jepBM1009-048

1. The JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket Stepping up to Pro Seal MLS head gaskets from the composite or graphite units now are standard equipment on many factory engines.

2. This trend is being validated by more automakers offering MLS gaskets on select high-performance engines in their lineups. 

3. Also, all NASCAR and Pro Stock teams use MLS gaskets as composite fell out of favor and solid copper gaskets were not effective in sealing fluids. 

4. An abbreviation for multi-layer steel, MLS gaskets have taken center stage in the shop due to a number of engine-builder-friendly features. 

5. Granted, they can be a bit more expensive that conventional gaskets, however, the performance and durability advantages will pay off in the long run.

6. The “JE Pro Seal gaskets differ greatly from OEM gaskets,” said Jeremy Anderson of JE Pistons. 

7. “JE Pro Seal gaskets have a proprietary outer layer coating that prevents them from sticking to the deck surfaces. 

8. JE gaskets go through a heat treating and tempering process for good.

9. The basic premise of a MLS gasket is sandwiching three or more layers of thin steel that have been embossed in critical sealing areas. 

10. The embossments act as “springs” to ensure that there is no leakage of fluids or combustion pressure if the cylinder head moves or expands while the engine is under heavy load. 

11. The gaskets can also be coated to improve sealing in “micro” areas between the block, head and gasket.

JE Pro Seal BMW S54 Series 87.5mm .044in Head Gasket jepBM1009-048

 

JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 jep361343

1. These are JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 

2. The Ultra Series forged pistons from JE are the industry’s strongest, most fully featured pistons available off the shelf for performance cars.

3. Offered for a wide range of import and sport compact applications from 2JZ to 4G63 and Audi to BMW. The Ultra Series pistons feature JE’s proprietary Aligned Grain Flow forging technology providing next-level tensile strength ideal for the extreme cylinder pressures of power adder engine builds. 

4. Equipped with custom level features including thermal barrier crown coating, skirt coating, gas ports and more.The Ultra Series are the ideal pistons for your high-boost build. 

5. As with all JE Pistons products, Ultra Series pistons are made 100% in the USA.

 

• Designed for Power: Every feature on Ultra Series Pistons are optimized to perform high-horsepower racing engines 

• Aligned Grain Flow Technology: Exclusively available on JE Ultra Series, this proprietary, in-house forging process maximizes tensile strength to withstand the stresses of high-performance engine environments 

• Skirt Coating: Reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise, especially on cold start 

• Thermal Barrier Crown Coating: This ceramic-based coating reflects heat into the combustion chamber, therefore reducing piston crown temperatures and improving exhaust gas scavenging 

• High-Strength Wrist Pins: Premium thick-wall wrist pins are manufactured by Trend Performance in the USA and are designed for the demands of high-performance/ power-adder builds 

• Lateral Gas Ports: Help maintain power-producing ring seal at the top compression ring, even in high RPM and high boost situations 

• Optimized Pin Oiling: Enhanced pin oiling features keep pin, pin bores, and small-end lubricated for reduced heat, friction and wear 

• Made 100% in the USA 

***IMAGES ARE REPRESENTATIVE AND NOT OF THE ACTUAL PRODUCT YOU WILL RECEIVE***

JE Pistons Ultra Series Toyota 2JZGTE 86.5mm Bore 9.0:1 Pistons - Set of 6 jep361343

 

Duraflex GT500 V2 Hood for Ford Mustang 2010-2012 EXD115195

**2010-2012 Ford Mustang Duraflex GT500 V2 Hood - 1 piece

Note: 

1. Hood pins are required.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex GT500 V2 Hood for Ford Mustang 2010-2012 EXD115195

 

MagnaFlow Cat-Back Exhaust Kit Street Series 2-1/2" Stainless Steel for Mustang EcoBoost 2015 mag19097

The efficiency of exhaust system will determine the real horsepower to be produced.

The MagnaFlow 21/2” catback exhaust for Mustang Ecoboost was built with great characteristics with exceptional sound and workmanship quality.

Material: 100% Stainless Steel

Tubing O.D. Size:2.5in.

System Type: Cat-Back

TIP O.D. Size:4.5in.

TIP Quantity: 2

Single/Dual: Dual

Exit Position: DUAL SPLIT REAR EXIT

Features and Benefits:  
Lifetime Warranty
Dyno Tested And Proven To Make Power
Performance Gains In Horsepower And Torque
Great Sound -Has A Smooth
Deep Tone
Easy To Install
Mandrel-Bent. All Welded. 
Built To Last.

MagnaFlow Cat-Back Exhaust Kit Street Series 2-1/2" Stainless Steel for Mustang EcoBoost 2015 mag19097

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet

 

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet

1. This is Clutch Masters’s finest and most economical multi-plate clutch systems available for today’s high performance vehicles.

2. Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. 

3. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. 

4. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. 

5. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit.

6. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. 

7. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available.

850 SERIES – STREET/ RACE  (8.50” Twin Disc) – 1 sprung ceramic disc, and 1 fiber tuff rigid disc

**The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load.

All systems include:

• Cover Assembly with attached Diaphragm
• Pressure Plate Ring
• Two Discs
• One Mid Plate
• Billet Aluminum or Steel Flywheel
• Release Bearing
• Pilot Bearing (when applicable)
• Pressure Plate Bolts

Please Select Which Transmission Type you will be using.

Clutch Masters TD850 Twin Disc Clutch Kit - Toyota 2JZ/1JZ - Street TD850-JZStreet