Porsche, Honda, Audi, Volkswagen, Ford, Dodge,Toyota, Subaru, Mitsubishi, Mercedes

Monday, May 27, 2024

ORC METAL SERIES ORC-309 SINGLE FOR HONDA CIVIC K20A ORC-309D-05H

 

ORC METAL SERIES ORC-309 SINGLE FOR HONDA CIVIC K20A ORC-309D-05H

ORC METAL SERIES ORC-309 SINGLE FOR HONDA CIVIC K20A ORC-309D-05H

1. This is a heavy-duty clutch that accommodates widely from light-tuned car to a high powered K20A Honda Civic.

2. It enables mild and outstanding pedal feeling, secure torque transmission, better clutch disengagement and stable half clutch feeling at high level. 

3. This is Metal clutch series from ORC with an excellence correspond to a wide range of situations.

4. It reacts quickly to driver's mind and provides great controllability that contributes to improving time track.

**Engine:K20A 
**Item type: STD (standard crimp type) damper with the clutch disk 
**F / W mounting bolts: Please prepare a genuine flywheel mounting bolts. 
**Sleeve bearings: it is attached to the clutch KIT. 
**Release bearing: it has been supplied with the clutch KIT. (A type) 
**Mechanism: push 
**Corresponding torque: 340 (35) N · m (kgf · m)

ENDLESS SWIVEL RACING BRAKE LINE SET FOR PORSCHE 911 CARRERA 3.2 911 EIB501

 

ENDLESS SWIVEL RACING BRAKE LINE SET FOR PORSCHE 911 CARRERA 3.2 911 EIB501

ENDLESS SWIVEL RACING BRAKE LINE SET FOR PORSCHE 911 CARRERA 3.2 911 EIB501

1. The Ewig swivel racing hose part utilizes stainless mesh.

Fitting part: Stainless steel material 

Socket part: Stainless steel material. 

2. The "Swivel Racing" uses SUS304 stainless steel, which has better strength and corrosion resistance, for the fitting part. 

3. It is a high quality brake line that combines high reliability and aesthetics. 

4. The performance aspect that conveys the pedal effort without waste and realizes a sharp response is also included.

5. Recommended for users who place importance on high durability suitable for hard use on the brake line. 

6. The socket on the vehicle body side is rotated by the swivel mechanism, which makes it easy to handle when installing.

7. The degree of freedom in handling is maintained as a countermeasure against breakage of the brake line due to insufficient line length adjustment. 

8. A "sleeve" made of reinforced rubber is provided at the boundary between the socket and the line to prevent line breakage from the base of the socket, known as weak point of the brake line.

Sunday, May 26, 2024

Carbon Creations Grid Hood for Chevrolet Camaro 2016-2021 EXD113177

 

Carbon Creations Grid Hood for Chevrolet Camaro 2016-2021 EXD113177

Carbon Creations Grid Hood for Chevrolet Camaro 2016-2021 EXD113177

Carbon Creations Grid Hood for Chevrolet Camaro 2016-2021 EXD113177


2016-2021 Chevrolet Camaro Carbon Creations DriTech Grid Hood - 1 Piece

Note: 
1. Hood pins are required. 
2. Not designed for ZL1.
3. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 
4. Some modification/adjustment/final fit must be performed for proper fitment. 
5. No returns or refunds.



Carbon Creations AF1 Hood for BMW M3 2008-2013 EXD112914

 

Carbon Creations AF1 Hood for BMW M3 2008-2013 EXD112914

Carbon Creations AF1 Hood for BMW M3 2008-2013 EXD112914


This is year 2008-2013 BMW M3 E92 E93 Carbon Creations DriTech AF1 Hood - 1 Piece.

It will suite your BMW M3 and gives a more appealing look, more aggressive and sporty appearance.

Note: 
Hood pins are required. 
For 2dr and convertible only
Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 
Some modification/adjustment/final fit must be performed for proper fitment. 
No returns or refunds.


Borla 00-02 Audi S4 2.7L 6cyl AWD SS Catback Exhaust bor14902

 

Borla 00-02 Audi S4 2.7L 6cyl AWD SS Catback Exhaust bor14902


Borla 00-02 Audi S4 2.7L 6cyl AWD SS Catback Exhaust bor14902


1. This is a renowned Borla 00-02 Audi S4 2.7L 6cyl AWD SS Catback Exhaust.

2. Will fit 2000-2002 Audi B5 S4 Quattro 2.7T V6 Automatic/ Manual Transmission forbAll Wheel Drive 4 Door.

3. The Borla catback being described to provide an extensive sound of power for 6 cylinders Audi S4 2.7L.

4. Provide exceptional linkage in between drivers and machine via precise acoustic tone feedback of engine RPM as a real guide to driver in a crucial/ challenge situations.

5. Unrivalled pitch quality assists driver to be in the precise power band, at the most responsive RPM to steer.

6. The Borla Catback Exhaust for 00-02 Audi S4 2.7L 6cyl bor14902 has a great combination of niche patented technology, computer modelling, excellence prototype and advance sound analysis tools.

7. The impressive specifications for Borla Catback Exhaust will greatly improve the horsepower and performance for your Audi S4 2.7L.


Saturday, May 25, 2024

BLITZ NUR-SPEC S EXHAUST FOR TOYOTA SUPRA JZA80 2JZ-GTE MT2080

 

BLITZ NUR-SPEC S EXHAUST FOR TOYOTA SUPRA JZA80 2JZ-GTE MT2080

BLITZ NUR-SPEC S EXHAUST FOR TOYOTA SUPRA JZA80 2JZ-GTE MT2080

Product Name: NUR-SPEC S eXHAUST 
Model Year: 93 / 05-02 / 07 
Ex-Gas Code: GF- 
Chassis Model: JZA80 
Product Class: NUR-SPEC S 
Product Series: S 
Tip Piece Count : 1 
Position of the Exhaust Tip: one side 
Design: round-slash 
Tip Material: stainless steel SUS304
Tip OD: 114.3 
Pipe Size: 70-80 
Piece: 1 
Proximity exhaust noise genuine / BLITZ: 87/89 

Description: 

1. Main silencer part replace only, hold the torque of the low and medium speed range in the normal section.

2. It was linked to the power-up to ensure the exit of the medium and high speed range at the silencer unit. 

3. Good straight structure compared to the genuine type.

4. Utilize glass wool material for an excellence silencing effect.

5. Produce a great racy sound to excite.

APEXI N1 EVOLUTION EXTREME X SINGLE EXHASUT MUFFLER FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 164-T010J

 

APEXI N1 EVOLUTION EXTREME X SINGLE EXHASUT MUFFLER FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 164-T010J

APEXI N1 EVOLUTION EXTREME X SINGLE EXHASUT MUFFLER FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 164-T010J

Compatible Car: SUBARU BRZ ZD8 TOYOTA GR86 ZN8

Model Year: 2021/08--
Sound Level (db) : L: 92 
Tail φ123 φ60→65 6MT
AT car installation possible Single output (left)

APR Performance STI Brake Rotor Cooling Kit for Subaru STi Only 2008 2010 aprCF-808658

 

APR Performance STI Brake Rotor Cooling Kit for Subaru STi Only 2008 2010 aprCF-808658

APR Performance STI Brake Rotor Cooling Kit for Subaru STi Only 2008 2010 aprCF-808658

APR Performance STI Brake Rotor Cooling Kit for Subaru STi Only 2008 2010 aprCF-808658


The APR Brake Cooling Ducts are aerodynamically-optimized to "funnel in" massive amounts of air for your Subaru STi.

Also known as the venturi effect, when the vehicle speed increases, this funneled-in air increases in both pressure and velocity as it passes from the larger frontal area into the smaller pipe section of the brake duct. 

When matched with appropriate high-temperature air duct hoses, the APR Brake Cooling Ducts will help to channel in large volumes of fresh air to help cool down red-hot brake rotors lap after lap on the track. 

Excessive heat can cause major and expensive damage to critical components in a car. Engine bays, radiators, brakes, transmissions and differentials all need good air flow to help transfer away unwanted heat. 

The APR Air Ducts help bring fresh cooling air to different areas that need additional cooling. 

It was built using pre-pregnated carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Air Ducts add both function and "lightness" where it counts.

TOMEI TI RACING EXHAUST FOR MITSUBISHI EVOLUTION EVO 10 CZ4A 4B11 440027

 

TOMEI TI RACING EXHAUST FOR MITSUBISHI EVOLUTION EVO 10 CZ4A 4B11 440027

TOMEI TI RACING EXHAUST FOR MITSUBISHI EVOLUTION EVO 10 CZ4A 4B11 440027

1. This high quality TOMEI TI Racing Exhaust production is for true competition use without compromise on performance.

2. Utilize only the best Titanium grade materials for better result.

3. The whole process from the special racing layout design was made as straight as possible for high flow silencer. 

4. TOMEI had emulated all their expertise into this TI Racing Exhaust System for Mitsubishi EVO 10. An unrivalled exhaust system to note.

PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE PANAMERA PANAMERA Z359-RACING999

PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE PANAMERA PANAMERA Z359-RACING999


PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE PANAMERA PANAMERA Z359-RACING999

Compatible car: PORSCHE PANAMERA

Grade and Year Model: 

10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46
10/03~13/03 970M46

Developed in response to testing in GT races, RACING999 brake pads offer absolute braking capacity and fade-resistance.

Material: Super graphite metallic

Applicable Rotor Temperature: 200-800C

APR Performance Carbon Fiber Rear Diffuser for Dodge Viper SRT10 2003-2010 aprAB-708219

 

APR Performance Carbon Fiber Rear Diffuser for Dodge Viper SRT10 2003-2010 aprAB-708219

APR Performance Carbon Fiber Rear Diffuser for Dodge Viper SRT10 2003-2010 aprAB-708219


Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. 

Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air. 

To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to transition smoothly transition into the low pressure vacuum in the rear. 

This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

***For Convertible Body Only.



MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GC8 1100FE022

 

MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GC8 1100FE022

MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GC8 1100FE022

Engine type EJ20G・K・7 
Pipe diameter: Primary φ38.1 
Pipe diameter: Second φ42.7 
Pipe diameter: Tail φ48.6

Friday, May 24, 2024

ZEROFIGHTER US OEM GLASS HEADLIGHT OEM FOR CIVIC 3-DOOR EG ZEROF-00605

 

ZEROFIGHTER US OEM GLASS HEADLIGHT OEM FOR CIVIC 3-DOOR EG ZEROF-00605

ZEROFIGHTER US OEM GLASS HEADLIGHT OEM FOR CIVIC 3-DOOR EG ZEROF-00605

1. This is EG / EJ1 Civic US genuine glass headlight for EG Civic / EJ1 Civic Coupe.
 
2. The US Honda genuine equivalent (OEM).
 
3. It was made of glass with H4 ball specifications. 

4. Inclusive a left and right set. 

5. Built by ZEROFIGHTER with a very accurate quality.


TOMEI EXPREME EXHAUST MANIFOLD FOR IMPREZA GDB GRB GVB VAB EJ 414001

 

TOMEI EXPREME EXHAUST MANIFOLD FOR IMPREZA GDB GRB GVB VAB EJ 414001

TOMEI EXPREME EXHAUST MANIFOLD FOR IMPREZA GDB GRB GVB VAB EJ 414001

Conformity: SUBARU IMPREZA WRX STI GDB C-G / GRB A-D / GVB C-D / VAB Expreme EJ Twin scroll.

TOMEI EXPREME EXHAUST MANIFOLD FOR IMPREZA GDB GRB GVB VAB EJ 414001 has been highly evaluated in all aspects such as performance, reliability and quality.

It has been released to the world with numerous exhaust manifolds and it has become common to GDB / GRB / GVB.

Embedded all the exhaust technology from TOMEI to the fullest extent. Finish products are a balanced exhaust manifold in all aspects with regard to power and  torque.

Features:
Exhaust manifold body (1) 
Support pipe (1) 
E / G - Exh - Support pipe gasket (3) 
Turbine - Front pipe gasket (1) 
Support pipe - Turbine gasket (1) 
Cap bolt M10 * L = * P = 1.5 (3) 
Flat washer M10 (3) 
Flange nut M10 * P = 1.5 (3) 
Stud bolt M10 * P = 1.25 (4) 
Bolt smooth paste (1) 
Bandage Band (Long * 3 Short * 8) (11) 
Bandage (1) 
TOMEI sticker (2) 
EXPREME sticker (2) Instruction Manual (1)


SPOON FRONT BRAKE PAD FOR HONDA CIVIC EG6 EK4 45022-EG6-000

SPOON FRONT BRAKE PAD FOR HONDA CIVIC EG6 EK4 45022-EG6-000


SPOON FRONT BRAKE PAD FOR HONDA CIVIC EG6 EK4 45022-EG6-000

Features: 

(1) Improve fading performance by using material with reduced resin gas generation
(2) Sufficient effect at low temperature 
(3) Normal equal wear resistance 
(4) Low aggressiveness to the rotor. 

These features are realized by combining great material of the pads, improved backing metals and other various factors.

Utilize not only great stopping power but also the minus G inertia generated by the braking for the cornering power. Provide excellent controllability for better performance.

The optimum minus G (average friction coefficient 0.32 to 0.38) is obtained when the rotor proper temperature is from 0 to 400 ° C.

Provide exceptional confidence in the street, with the direct brake effectiveness and an excellent controllability.