TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

 

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

1. The need for increased performance and horsepower for Civic Type R engines are truly overwhelmed.

2. Those serious demands had led TODA RACING to step up and design a better single progressive coil spring to replace the STD double valve springs. 

3. Although allowing valve lifts of up to 13.0mm, the material and the coil springs natural frequency have all been optimized.

**Can be used up to 13.0mm of lift.

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

 

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

Year Model: 2021.08 + 
Engine: 2400 FR 
Grade: R, S 
Front Lowering: -20 

Rear Lowering: -20 
Rate: F: 33 Rear: 45.1 
Travel: Front: 244 Rear: 267

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR

 

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR 

Model Year: 2009/5 ~ 
emissions: 2000 TB 
Series: Ti2000 DOWN 
set: R 
down width (mm): 25 ~ 20 
spring rate (kg / mm): 2.96

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR 

TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201 REINHARD A TYPE MUFFLER STAINLESS EXHAUST

 

TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201 REINHARD A TYPE MUFFLER STAINLESS EXHAUST 

Compatible Car: Toyota Supra JZA80 TB

Compatible Engine: 2JZ-GTE

Year Model: 93.05~97.08 

EXP: 76.3Φ 

Specifications Tail Size: 125Φ Shell Double 100ΦW 

Type: Compatible 

Material: All Stainless Steel 

Volume: -

**For turbos 

**Cannot be installed on late model (VVT-I) **Not compatible with aftermarket aero 

**Inner sold separately

**Great to unleashed true horsepower from JZA80

REINHARD A TYPE MUFFLER STAINLESS EXHAUST FOR TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

 

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

Compatible Engine: 2JZ-GTE
Model Year: 93.05-05.08 
Conformity I / J: A / C * 1 * 2 
Fitting: φ8

Advantages of the SARD Fuel Delivery Pipe (63630)

1. Increased Fuel Delivery Capacity

SARD fuel rails are engineered to handle higher fuel flow compared to the OEM units. This is especially important for boosted engines and tuned applications where maintaining consistent fuel pressure is critical. 

2. Durable, High-Quality Construction

The part is crafted from high-grade aluminum and finished with an anodized coating, offering improved heat resistance and durability. 

3. Supports Larger, Top-Feed Injectors

If you plan to upgrade injectors for higher flow rates, the SARD fuel rail supports larger top-feed injector configurations. 

4. Adaptable for Custom Setups

The rail features fittings that make it easier to integrate regulators, pressure gauges, or custom fuel lines—ideal for tailored tuning setups. 

5. Easier Installation and Maintenance

By virtue of a clean, solid build and well-designed fittings, the SARD fuel rail simplifies installation and is convenient for quick maintenance or troubleshooting.  

Summary

The SARD Fuel Delivery Pipe (63630) for the JZA80 offers:

• Robust construction with anodized aluminum
• Enhanced fuel flow for tuned or boosted setups
• Compatibility with larger, top-feed injectors
• Flexibility for custom fittings and fuel system enhancements

This makes it a smart upgrade for anyone aiming to increase performance, reliability, or ease of tuning on their 2JZ-GTE engine.

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

 

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

GruppeM Original Aero Parts -MADE IN JAPAN- 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Material: FRP White Gel Coat Finish 
Displacement: 3.3 LITER 
Grade Specifications: TURBO 

* Optional downforce board DBB-911 can be installed at the same time.

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005

 

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005

Model: K20C 
Model Year: 17/09- 
Type: R type INTERCOOLER 
Core Size・Location: 695x178x100 
Type: R type

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005

OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

 

OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

1. Utilized a lightweight and durable A5052 aluminum material (thickness: 2 mm).

2. OKUYAMA Alfa GT floor subframe can be installed at the same time.

3. Rectifies the air flowing into the lower part of the engine room. 

4. By flattening the lower part of the vehicle, the rectification effect of the lower part of the vehicle is improved at high speeds and appropriate downforce is generated. 

5. A panel is also placed on the side of the under panel to improve aerodynamics and cooling effect. 

6. When drain the oil from above when changing the oil, the oil element can be replaced by removing only one side of the side panel when replacing the oil element. 

7. The under panel OKUYAMA for Alfa GT can secure a lot of road clearance by raising the panel body above the genuine under cover. 

8. A louver is provided on the panel surface to efficiently exhaust the hot air in the engine room and improve the cooling effect. 

OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

 

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

Compatible Engine: 4B11(T) 2.0L 

Manufacturer: GruppeM 
Brand: M 
Displacement: 2.0 LITER 

Grade / Specifications: Turbo 

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower and stabilize the intake air temperature. 

Achieves torque and power-up in the entire range from low to high revs. 

You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING

 

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING 

1. The ultra-lightweight body is realized by adopting a full carbon monocoque.

2. The Alfa Romeo 4C is equipped with a 1.75L direct injection turbo that gives 240PS. 

3. This Alfa Romeo's first midship "4C" boasts an impeccable degree of perfection. 

4. However, at a high level condition such as sports driving on a circuit, there is a significant room for improvement noticed by Kansai Service.

5. High performance Alfa Romeo C4 with an enhanced horsepower band requires a good downforce management with Kansai Service Rear Wing.

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING 

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

 

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

Ladder bar plus aluminum
MAZDA ROADSTER NA NB HOOD

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

 

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

Engine: B16A

1. Designed with serious consideration on torque that support the horsepower and overall performance.

2. Improves torque response over the entire range from low/ medium speed to high rpm. 

3. Material: SUS304 stainless steel 4-2-1 type pipe diameter 40-45-50φ.

4. Welds may damage due to engine vibration caused by deterioration of the engine mount over time. 

5. Repairs are available at actual cost by J’S Racing. Please feel free to contact.

**Only the head side gasket is included.

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

 

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

Model Year: 13/10- 

The W-003 Brake Pad Front from Endless gives the driver a sense of security with its overwhelming stopping power and stable braking feeling. 

Featuring exceptional quality specifications that assist for greater braking power for improved horsepower Volkswagen Golf VII.

Material: Ceramic carbon metal 
Rotor proper temperature range: 200°C~850°C 
Average coefficient of friction: 0.40~0.45 
Driving field: Circuit
Best match tire: S tire

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

 

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

  **The GruppeM Ram Air System is a top-tier choice for R35 GT-R owners seeking both performance and style, making it an ideal upgrade for street, track, or enthusiast builds.

The GruppeM Ram Air System (FR-0212EVO) for the Nissan GT-R R35 (VR38DETT) is a premium intake upgrade designed to improve performance, enhance engine response and provide a distinctive intake sound. 

Built with high-quality materials and advanced engineering, this system is ideal for enthusiasts seeking both power gains and aesthetic appeal.

Key Features:

1. Vehicle Compatibility:

• Designed for the Nissan GT-R R35 with the VR38DETT 3.8L twin-turbo engine.

• Suitable for both stock and modified setups.

2. Performance Enhancements:

• Carbon Fiber Duct Design: Prevents hot engine bay air from entering the intake, ensuring a supply of cooler, denser air.

• Improves torque and power output across the entire RPM range, from low-end responsiveness to high-end peak performance.

• Stabilizes intake air temperatures, resulting in consistent power delivery under various conditions.

3. Sporty Intake Sound:

• Produces a distinctive and exhilarating intake sound, adding to the driving experience.

• Provides an audible indication of the increased air volume entering the engine.

4. Bolt-On Installation:

• Comes with a dedicated fitting adapter for easy and secure installation.

• No cutting or extensive modifications required, maintaining the integrity of your GT-R.

5. High-Quality Construction:

• Made with precision-engineered carbon fiber for lightweight durability and heat resistance.

• Adds a visually striking component to your engine bay.

Benefits:

• Power Gains: Noticeable improvements in horsepower and torque throughout the rev range.

• Cooler Intake Air: Optimized air intake for enhanced performance and reliability.

• Aesthetic Appeal: The carbon fiber construction elevates the engine bay’s appearance.

• Improved Throttle Response: Faster and smoother power delivery.

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S

 

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S

This is an improved version rotor kit from REIMAX with the tooth thickness increased by 2 mm compared to the genuine rotor. 

Stable oil pressure can be secured even in situations where oil temperature rises such as for turbo and sports driving. 

Stable oil pressure is crucial during high performance driving that in adverse, support the performance from your horsepower improved machines.

*When installing, cut the oil journal of the genuine cover by 2mm by machining. 

Material: SCM440H
Outer rotor diameter: 77Φ
Rotor tooth thickness: T=14MM
Spacer: t=2.0mm

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S