StopTech Stainless Steel Brake Lines - Toyota Supra MK4 / Lexus SC300 SC400 ; Front 950.44008

1. StopTech is a registered brake line manufacturer with the United States DOT. 

2. All StopTech Stainless Steel Brake Lines are manufactured to meet DOT Compliance Standards. 

3. StopTech Stainless Steel lines also meet or exceed FMVSS 106 and applicable international and EU standards.

4. Testing beyond the limit is StopTech quality assurance. Every StopTech brake line is 100% tested in-house to a pressure of 4,500 PSI. 

5. This is almost 4 times the typical line pressure exerted by a production vehicle’s master cylinder.

6. Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. 

7. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. 

8. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

9. StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. 

10. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

11. The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. 

12. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

13. The improved horsepower Toyota Supra requires an exceptional quality of brake system and brake line to maintain it peak performance.

14. A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.

15. Coated Teflon inner coreStopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. 

16. The PTFE tube is very resistant to expansion under pressure and maintains integrity with exposure to corrosive brake fluid.

17. Stoptech braided brake lines protect against the elements of harsh driving conditions.The stainless steel braid provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. 

18. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

StopTech Stainless Steel Brake Lines - Toyota Supra MK4 / Lexus SC300 SC400 ; Front 950.44008

 

DBA 4000 Series Rotors Front Drilled/Slotted Rotors for Lexus Is300 2001-2005 , Lexus Gs300 1993-2005 , Toyota Supra 1993-1998 4748XS

If you have stepped beyond the ability of your stock brakes, then these DBA HD Series 4000XS brake rotors are perfect for you. 

These rotors contain many of the features that make DBA brake rotors so great. Their patented Kangaroo Paw ventilation, XG150 iron alloy and TSP process work together to allow these brake rotors to handle high-heat situations. 

Their non-directional, XS cross-drilled, slot design eliminates the need for different left and right discs and provides a consistent, strong brake feel. 

To top off these awesome rotors, DBA applies a protective paint to all non-friction surfaces and adds heat marks so you can monitor your peak brake heat. 

Have more confidence in your brakes with these DBA HD Series 4000XS brake rotors. Price is per rotor. 

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

DBA 4000 Series Rotors Front Drilled/Slotted Rotors for Lexus Is300 2001-2005 , Lexus Gs300 1993-2005 , Toyota Supra 1993-1998 4748XS

KBD Body Kits Chevrolet Camaro 2010-2013 RS Retromod 4 Piece Polyurethane Full Body Kit kbd37-6073

 

KBD Body Kits Chevrolet Camaro 2010-2013 RS Retromod 4 Piece Polyurethane Full Body Kit kbd37-6073

1. Includes the following: Chevrolet Camaro 2010-2013 RS Retromod 4 Piece Polyurethane Full Body Kit (37-6073).

2. KBD Body Kit parts are aftermarket and as such will not have an exact 100% OEM Fit. 

3. They will REQUIRE fitting/ adjusting/ sanding/etc. to obtain a satisfactory fit. It is HIGHLY recommended that a professional body shop familiar with installing aftermarket polyurethane parts fit and install these parts for the best results. 

4. Because KBD uses highly flexible polyurethane it is also recommended to add reinforcements to larger KBD parts such as bumpers to avoid flexing under load.  

5. Many KBD parts are made to order and generally take 5-7 business days to manufacture prior to shipping. 

6. Some are in stock and ready to ship in 1-2 days, if you are in a rush you may contact a sales rep to check stock prior to ordering.

KBD Body Kits Chevrolet Camaro 2010-2013 RS Retromod 4 Piece Polyurethane Full Body Kit kbd37-6073

 

Forge Motorsports VW Golf GTi Mk5 Front Mount Twintercooler Kit FMINTMK5

This is a new Golf 2.0 L FSIT "Twintercooler." This ground breaking innovation features Forge Motorsports unique twin-core design. It has added greater efficiency throughout the entire RPM band beyond that of a single core setup.

Unique Twin Core design retaining the OEM intercooler. 10-15 BHP increase on a stock car. Over 15 -20 Degree drop in ambient cooling temperatures. Includes necessary hardware and instructions for installation. 

Forge Motorsports had achieved this by using the latest core technology with high flow end tank designs to achieve a huge reduction in inlet temperatures. 

Many months were spent for testing various designs and the Twintercooler design emerged as the clear winner. 

This is a bolt-on kit that retains the use of the OEM intercooler to produce both horsepower AND torque. But more important, a HUGE reduction in inlet temperatures and increased flow efficiency. 

A reduction in temperatures of up to 20°C from 102 to 82 at 6600 RPM. While the horsepower figures themselves are impressive enough, this will undoubtedly vary from car to car under various circumstances. But such a large reduction in inlet temperature is difficult to achieve. 

The twintercooler gives an extra 6.1 litres of capacity to your intercooler system along with a further 1016 square centimetres of frontal surface area to help improve your engine inlet air temperatures.

The twintercooler has a width of 635mm x height 160mm x depth 60mm and the inlet and outlet tube size is 60mm. A Forge Motorsports product that truly is engineered for performance. 

Please note: It is confirm that if your vehicle has been supplied to "Hot Climate specification" and has the extra radiator in the front of the wheel arch, Forge Motorsports intercooler upgrade WILL fit your car. 

Dyno proven horsepower and torque gains High flow cast end tanks ensuring optimum air  transition for cooling efficiency NO CUTTING of the vehicle is required to fit this product 

The unique Forge Silicon hoses supplied in the Twintercooler kit were designed on  Solid works and  have been created  to include an expensive inner liner of modified silicone known as Flurosilicone.

This liner means that the hoses are suitable for use with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist. The use of a Flurosilicone liner ensures that Forge silicone hoses are the best, longest lasting and preferred choice of the discerning car enthusiasts.

The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically. 

This product has been designed to last a lifetime. Please beware of forgeries.

Fitment:Volkswagen Golf MK5 GTI

Forge Motorsports VW Golf GTi Mk5 Front Mount Twintercooler Kit FMINTMK5

 

KBD Lexus GS Series GS300 GS400 GS430 1998-2005 Bsport Style 4 Piece Polyurethane Full Body Kit kbd37-6890

KBD Lexus GS Series GS300 GS400 GS430 1998-2005 Bsport Style with 4 Piece Polyurethane.

Full Body Kit for auto enthusiasts and hobbyists. KBD Body Kits is polyurethane automotive body parts suitable for upgrading, modifying and repairing. 

Gives significant advantages:

1. INCREDIBLE DURABLITY – KBD Body Kits Polyurethane parts are practically unbreakable. Fiberglass and OEM parts cannot compare to the durability and flexibility of KBD automotive bumpers, body panels and body kits. 

2. PRECISE FITMENT – If the part shown on this listing says it is for your car, it will fit. KBD Body Kits Polyurethane parts utilize the highest quality molds and advanced injection molding technologies to ensure proper fitment for your vehicle. 

3. EASY INSTALLATION – Body shops love to install KBD Body Kits Polyurethane parts on cars, trucks and SUVs due to the ease of installation and superior quality. Each part comes ready for prep and paint and is manufactured in the United States to ensure the highest quality control. Basic sanding and priming is all that is needed before paint.

4. PERSONALIZED STYLE – KBD Body Kits is an iconic brand that represents some of the hottest styles of parts for your vehicle. From sleek to aggressive, KBD have hundreds of styles that will fit your tastes. 

KBD parts can be seen on professional drivers vehicles all over the world. We take pride in every style we design and produce.

KBD Body Kit parts are aftermarket and as such will not have an exact 100% OEM Fit. 

They will REQUIRE fitting/ adjusting/ sanding /etc. to obtain a satisfactory fit. It is HIGHLY recommended that a professional body shop familiar with installing aftermarket polyurethane parts fit and install these parts for the best results. 

Because KBD uses highly flexible polyurethane it is also recommended to add reinforcements to larger KBD parts such as bumpers to avoid flexing under load. 

Many KBD parts are made to order and generally take 5-7 business days to manufacture prior to shipping. Some are in stock and ready to ship in 1-2 days.

KBD Lexus GS Series GS300 GS400 GS430 1998-2005 Bsport Style 4 Piece Polyurethane Full Body Kit kbd37-6890

 

APR Carbon Fiber Intake - 1.8T/2.0T EA888 Gen 3 MQB CI100033

FEATURES:

• Increase horsepower and torque
• Better throttle response
• Enhanced engine sound
• Closed carbon fiber system
• All mounting hardware included
• Pleated cotton gauze filter
• Directional turning vanes for proper filter loading

Note 1: Fitment excludes 2.0T Gen 3 B-Cycle engines with a MAF sensor on the intake pipe. The TT and TTS require an inlet adapter (CI100033-C). 

Note 2: Models with Secondary Air Injection (SAI) require a breather filter (CI100020-A)

The APR Carbon Fiber Intake System is a great choice high performance upgrade for the latest 1.8T and 2.0T engines as found in various MQB platform vehicles. 

The factory intake design has the foundation for excellent performance, but is sacrificed in an effort to meet other design requirements. 

With requirements set forth for only supporting factory power output levels, low engine sound levels and long service intervals, there is plenty of room for improvement. 

The APR Carbon Fiber Intake System increases performance primarily by improving mass airflow through the system while still providing adequate filtration. 

You may expect greater horsepower improvement and torque through the power band with a more direct and responsive feel upon pressing the throttle. 

Sounds from the engine and turbocharger are enhanced and some may even experience better fuel economy depending on driving style.

APR Carbon Fiber Intake - 1.8T/2.0T EA888 Gen 3 MQB CI100033

 

Megan Racing Front Lower control Arm (Spherical Bushing) for BMW F30 12-18 MRC-BM-0324-OE-i

Applications:- BMW 3-Series 2012-2018 (EXC M3)

Specifications and Features: Location: Front Lower-Bushings: Spherical & Polyurethane-Direct Bolt-On-1-Year Warranty Against Manufacturer Defects

Megan Racing front lower control arms for the BMW F30/F32 is a complete replacement for the factory component. 

Utilizing a similar cast design as the factory arm but with spherical and polyurethane bushings installed allowing for improved cornering response.

Megan Racing control arms are constructed from a lightweight cast aluminum that can withstand the stresses from extreme competition while keeping the weight to minimum. 

Spherical and polyurethane bushings provide freedom of movement and free of bind while eliminating all slop unlike factory molded rubber bushings.

This not only increase vehicle dynamic response but also allow the suspension to absorb more road forces. 

All hardware are treated to help prevent corrosion during the harshest weather conditions and protected with a 1-year warranty against manufacturer defects.

Megan Racing Front Lower control Arm (Spherical Bushing) for BMW F30 12-18 MRC-BM-0324-OE-i

BADMOON RACING RPM REAR PIECE MODIFY MUFFLER EXHAUST FOR HONDA CIVIC FD2 BADMOONRACING-00001

 

BADMOON RACING RPM REAR PIECE MODIFY MUFFLER EXHAUST FOR HONDA CIVIC FD2 BADMOONRACING-00001

HONDA CIVIC FD2

Domestic manufacturing stainless steel

・All Sten ・Full Tig shaping silencer 

・SUS304 racing stainless tail (FD2) 

・Full laser processing straight pipe resonance pipe 

・360-degree tornado structure New type.

· No deterioration over time due to no glass wool (FD2) 

・No installation process, easy installation

・M7 model added! (Main 70mm high rotation SPL!!) 

Specifications: Rear pice only. 

Main pipe: 70mm. 

Tail: 113mm

BADMOON RACING RPM REAR PIECE MODIFY MUFFLER EXHAUST FOR HONDA CIVIC FD2 BADMOONRACING-00001

SARD GT1 PERFORMANCE AERO FULL KIT WHITE FOR TOYOTA GR86 ZN8 81100

 

SARD GT1 PERFORMANCE AERO FULL KIT WHITE FOR TOYOTA GR86 ZN8 81100

The concept of Vertical twin take with aero balance in mind:m with a dynamic vertical twin take is placed. It was designed with a low center of gravity with wider base.

Achieves running stability with a wide body that improve the ground effect. A leshy design that further evolved the sporty design of the GR86.

Kit contents: Front bumper, Front fender garnish, Side step, Rear fender garnish, Rear corner aero device

SARD GT1 PERFORMANCE AERO FULL KIT WHITE FOR TOYOTA GR86 ZN8 81100

 

KBD Body Kits Volkswagen Golf GTI 1999-2005 R32 Style 1 Piece Polyurethane Front Bumper kbd37-6027

Includes the following: 

Volkswagen Golf GTI 1999-2005 R32 Style 1 Piece Polyurethane Front Bumper (37-6027). KBD Body Kit parts are aftermarket and as such will not have an exact 100% OEM Fit. 

KBD Body Kits is an iconic brand that represents some of the hottest styles of body kits, bumpers, skirts, lips, wings and more for your vehicle. 

From sleek to aggressive, KBD have 100's of styles that will fit your tastes. KBD Body Kits Polyurethane parts are practically unbreakable, meaning cracks, dents and dings are a worry of the past. 

Fitment is guaranteed for every part, because each part is designed and manufactured in the United States to ensure the highest quality control. 

KBD parts can be seen on professional drivers' vehicles all over the world. Auto enthusiasts and hobbyists demand KBD Body Kits Polyurethane automotive body parts when upgrading, modifying and repairing their car, truck or even SUV. 

INCREDIBLE DURABLITY: KBD Body Kits Polyurethane parts are practically unbreakable. Fiberglass and OEM parts can't compare to the durability and flexibility of our automotive bumpers, body panels and body kits. 

Cracks, dents and dings are a worry of the past with KBD Body Kits Polyurethane automotive body parts. 

PRECISE FITMENT: If the part shown on this listing says it is for your car, it will fit. KBD Body Kits Polyurethane parts utilize the highest quality molds and advanced injection molding technologies to ensure proper fitment on your vehicle - Tabs and drilling indentations are included on every part.

EASY INSTALLATION. Body shops love to install KBD Body Kits Polyurethane parts on cars, trucks and SUVs due to the ease of installation and superior quality. 

Each part comes ready for prep and paint and is manufactured in the United States to ensure the highest quality control. Basic sanding and priming is all that is needed before paint. 

PERSONALIZED STYLE. KBD Body Kits is an iconic brand that represents some of the hottest styles of parts for your vehicle. From sleek to aggressive, KBD have 100's of styles that will fit your tastes. KBD parts can be seen on professional driver's vehicles all over the world. 

Our parts can be seen on professional drivers' vehicles all over the world. We take pride in every style we design and produce!

INCREDIBLE DURABLITY - KBD Body Kits Polyurethane parts are practically unbreakable, meaning cracks, dents and dings are a worry of the past.

PRECISE FITMENT - Guaranteed fitment - Tabs and drilling indentations are included on every part!EASY INSTALLATION ?Çô Body Shops love to install KBD Body Kits Polyurethane parts due to their ease of installation and exceptional quality! 

Each part comes ready for prep and paint - Basic sanding and priming is all that is needed before paint.

MADE IN THE USA. All KBD Body Kits Polyurethane parts are designed and manufactured in the United States to ensure the highest quality, superior style and excellent fitment.

REQUIRE fitting/adjusting/sanding/etc. to obtain a satisfactory fit. It is HIGHLY recommended that a professional body shop familiar with installing aftermarket polyurethane parts fit and install these parts for the best results. 

Because KBD uses highly flexible polyurethane it is also recommended to add reinforcements to larger KBD parts such as bumpers to avoid flexing under load.  

KBD Body Kits Volkswagen Golf GTI 1999-2005 R32 Style 1 Piece Polyurethane Front Bumper kbd37-6027

NISMO INTAKE COLLECTOR KIT FOR NISSAN SKYLINE GT-R R32 R33 R34 RB26DETT 14110-RSR45

 

NISMO INTAKE COLLECTOR KIT FOR NISSAN SKYLINE GT-R R32 R33 R34 RB26DETT 14110-RSR45

**Intake temperature difference at the entrance of turbo chargers is improved by an average of 18% in the 2,400 to 7,600 rpm range. 

**At 4,800 to 7,600 rpm, power output is increased by an average of 1.8% while fuel economy is by an average of 0.4%. 

**Capacity: 4.1L (3.4L for Stock) 

**Material: Aluminium.

1. To get the most efficient shape for tuning engines (400ps to 600ps), the diameter & length of the intake pipe and the shape of the intake collector's cross section were redesigned. 

2. This had improved air distribution to each tube and equalize the air flow volume to each side, which increased torque in the mid-speed range. 

3. Fuller air intake to both front and rear reduces the difference in air temperature on both sides of the turbine. 

4. This had optimized the air-fuel ratio and ignition timing, which increases output and improves fuel consumption for greater performance.

5. Simple bolt-on installation means that no additional work is required (however, the throttle linkage and throttle sensor must be adjusted).

Included Parts:

1. Collector Assy-Int Manif

2. Gall Assy-Vac Cont

3. Hose-Vac Clutch Booster

4. Brkt-Oil Cooler Mtg

5. Gskt-Vac Pipe

6. Gskt-Throttle Chamber

7. Gskt-Temperature Sensor

8. Gskt-Oil Pressure Sensor

9. Gskt-Aac Valve

10. Pin-Dowel

NISMO INTAKE COLLECTOR KIT FOR NISSAN SKYLINE GT-R R32 R33 R34 RB26DETT 14110-RSR45

J'S RACING AIR INTAKE DUCT FRP FOR HONDA FIT GD AID-F1-F

 

J'S RACING AIR INTAKE DUCT FRP FOR HONDA FIT GD AID-F1-F

Material: FRP 

By attaching it to the duct part of the genuine bumper, fresh air is actively introduced. 

Due to the shape that guides air inside the duct, it is possible to increase the suction efficiency by about 80%. 

Regardless of whether the air cleaner is replaced or not, it is effective even with a genuine air cleaner. It is possible to maximize the power by lowering the intake air temperature. 

Not only performance improvement but also dress-up performance is improved. 
● FRP black gel coat finish. 
● Tapping screw included.

J'S RACING AIR INTAKE DUCT FRP FOR HONDA FIT GD AID-F1-F

GRUPPEM SUPER CLEANER CARBON DUCT FOR VOLKSWAGEN GOLF 6 1K CAV CAVK CTH SCI-0199

 

GRUPPEM SUPER CLEANER CARBON DUCT FOR VOLKSWAGEN GOLF 6 1K CAV CAVK CTH SCI-0199

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Displacement: 1.4 LITER 
Grade / Specifications: TSI Highline S / C + TURBO 160PS

Compatible Engine: CAV / CTH

Gruppem had developed a conical original filter with a center cone, using a K & N wet cotton filter with excellent dust collection effect as the filter medium. 

Increases the flow velocity while rectifying the intake air. The intake duct that surrounds the filter blocks the hot air in the engine room and suppresses the effect on the intake air temperature. 

These two effects dramatically improve filling efficiency. Demonstrates stable performance even in high-load continuous intake. 

GRUPPEM SUPER CLEANER CARBON DUCT FOR VOLKSWAGEN GOLF 6 1K CAV CAVK CTH SCI-0199