HKS COLD AIR INTAKE FULL KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 FA24 70026-AT012
1. This HKS intake system is a set of cold air intake, carbon suction pipe and intake duct engineered for Toyota GR86 ZN8/ Subaru BRZ ZD8 FA24.
2. Adopts the traditional high performance air cleaner "Super Power Flow (Φ150-80 wet type 2 layers)" to improve intake efficiency.
3. By storing the Super Power Flow main body in the box, the influence of hot air in the engine room can be suppressed and the intake air temperature can be kept low and stable.
4. The installation position of the air flow meter has not been changed from the stock position to meet the stock control, while the second intake duct has been added to reduce the ventilation resistance during intake.
5. Carbon suction pipe used 3K* twill weave carbon prepreg* on the surface and UD* prepreg on the inside using a hot press manufacturing method.
6. A silicone bag is used inside the pipe, and the hardening process is performed at high pressure and high temperature. This achieves high strength in addition to the smooth inner surface of the pipe.
7. This will allow air to flow smoothly while maintaining sufficient strength. The connection with the intake box is made of silicon, which has sufficient resistance to the high temperature of the engine room.
8. The smooth inner surface reduces the occurrence of inhalation resistance. In addition, the core wire is placed in the center to suppress deformation due to negative pressure and improve reliability.
*** 3K: 3,000 carbon fibers Prepreg: A sheet containing thermosetting resin in the fibers in advance UD: Unidirectional carbon fiber. UD realizes high strength by changing the lamination direction and laminating multiple sheets.
9. Air intake duct Intake resistance is reduced by adopting a one-piece structure with no joints inside by blow molding.
10. To reduce the resistance at the maximum flow rate, the narrowest part is equivalent to about Φ87.5mm, whereas the genuine one is about Φ50mm.
11. The layout is the same as the genuine one, so you can use it safely on the street without inhaling rainwater for your Toyota GR86 ZN8/ Subaru BRZ ZD8 FA24.
HKS COLD AIR INTAKE FULL KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 FA24 70026-AT012
Information:
Front Wheel Specs:
Rear Wheel Specs:
The AAM 3” Competition True Dual exhaust system is a perfect match for any turbocharged 350Z, including 800rwhp+ competition setups.
1. The AAM Competition 3" True Dual Exhaust System is the highest flowing exhaust systems available for the 350Z.
2. This exhaust has been designed to support the most demanding volume and velocity flow requirements.
3. The AAM Competition exhaust system comes with a specially designed 3” inner diameter flange on each side. Bolted directly to either the factory cat pipes or most aftermarket 2.5” test pipes.
4. Twin mandrel bent 3” polished stainless steel T-304 16 Gauge exhaust tubes run along each side of the 350Z’s under carriage.
5. Two high-flow stainless steel resonators will ensure straight through flow and a deep exhaust note.
6. By decreasing thermal load, the AAM Competition 3" True Dual exhaust system provides the maximum reliability for your VQ35 engine and its internal components.
7. Preliminary testing has shown gains over 40rwhp on high horsepower turbocharged 350Z cars compared to original equipment.
4-6 Weeks is their typical build time.
2005-2012 Porsche Boxster (987) Front
2005-2012 Porsche Cayman (987) Front
SPL Parts Porsche Lower Control/Trailing Arms Feature:
• Lightweight Aluminum and Titanium construction
• Gun drilled 2024-T351 Aluminum Trailing Link provides superior strength while reducing unsprung weight
• Rotating Clamp design allows for easy access to lock down your alignment settings
• Heat treated and electroless nickel plated 4340 Chromoly ball joint shanks
• Computer Aided Design with the aid of Finite Element Analysis
• Low friction 3 piece Teflon lined FK Spherical and Heim Joints/Rod Ends
• Multiple size Stainless Steel roll center and anti dive/squat spacers for precise adjustment
