Tubi Style Stainless Steel Muffler w/Titanium Tips BMW M3 E92 08-11

The Tubi Style Stainless Steel Muffler with Titanium Tips for BMW M3 E92 (2008–2011) offers a blend of performance, acoustic, and aesthetic benefits tailored for enthusiasts seeking an upgrade over the stock exhaust system. 

Here’s a breakdown of its key advantages:

Performance Advantages

• Weight Reduction: Titanium tips and lightweight stainless construction reduce overall exhaust weight compared to OEM, contributing to better weight distribution and slightly improved handling.
• Optimized Flow Design: Precision-engineered muffler internals reduce backpressure, allowing the naturally aspirated S65 V8 to breathe more efficiently, enhancing throttle response and top-end power.
• Dyno-Proven Gains (with full system upgrade): When paired with a Tubi mid-pipe or headers, noticeable horsepower and torque gains can be achieved, especially at high RPMs.

Acoustic Advantages

• Signature Tubi Sound: Produces a refined, exotic exhaust note with deep tones at low RPMs and aggressive, high-pitched roars at wide open throttle — enhancing the M3’s V8 character.
• Drone-Free Tuning: Engineered to minimize cabin drone during cruising speeds, making it suitable for both daily driving and spirited runs.
• Progressive Volume Build-Up: Maintains civility at idle and light throttle while delivering an exhilarating tone under load.

Material & Build Quality

• High-Grade Stainless Steel: Corrosion-resistant and long-lasting, ensuring durability through various driving conditions.
• Titanium Exhaust Tips: Lightweight, heat-resistant, and visually striking with possible heat-coloring effect — delivering a premium look with functional benefits.

Aesthetic & Branding

• Motorsport Heritage: Tubi Style is known for its use in Ferrari and Lamborghini OEM and motorsport applications — adding prestige and proven engineering to your M3.
• Enhanced Rear-End Appearance: The blue-burnt titanium tips give the rear end a race-inspired, custom-finished appearance.

Tubi Style Stainless Steel Muffler w/Titanium Tips BMW M3 E92 08-11

SEEKER SES MUFFLER KIT FOR HONDA S2000 AP1 AP2 11600-AP1-000

 

SEEKER SES MUFFLER KIT FOR HONDA S2000 AP1 AP2 11600-AP1-000

Compatible Car: Honda S2000 AP1 AP2

SES muffler KIT For AP1 ・ AP2 

- Main pipe diameter 60φ finisher Diameter 90φ 
- Material: Stainless steel 
- Proximity noise: 94dB (in-house measured value) 
- Weight: Approximately 18.5kg

The Honda S2000 is a high performance car with an extremely difficult setting to achieve both the volume and exhaust performance.

The settings that comply to safety standard conforming level with the single output layout, however but this SEEKER SES Muffler had surpass that with a special pipe length via a single output layout. 

The layout makes it possible to install a U-turn structure silencer with an excellent sound deadening effect. 

As a result, SEEKER SES had succeeded in achieving both a single output straight structure with an excellent exhaust performance with a proximity noise of 94 dB (in-house measured value), a volume that conforms to safety standards and a stress-free, piercing power feeling up to high rpm. 

Apart from that, the effect maintains for the low and medium rpm, which is often used for city riding and also gives good torque with an ease to handle. 

Made of 1.5mm thick stainless steel, giving priority to durability over weight with secured ground clearance as much as possible so that it is difficult to hit the bottom surface even if the vehicle is low down. 

By extending the length of the pipe and devising the internal structure of the silencer, the sound quality can be pursued and the sound like high rotation NA is realized.

Since it uses a unique muffling method, the deterioration of muffling performance during long-term use is minimal. 

Right out single layout:
- Replacement type after catalyst (intermediate pipe to tail silencer SET product) 
- Number of silencers: 3 (one of them has a U-turn structure) 

SEEKER SES MUFFLER KIT FOR HONDA S2000 AP1 AP2 11600-AP1-000

SPOON N1 MUFFLER KIT QUAD FOR HONDA S2000 AP1 AP2 F20C F22C 18000-AP1-040

 

SPOON N1 MUFFLER KIT QUAD FOR HONDA S2000 AP1 AP2 F20C F22C 18000-AP1-040

Compatible Car: HONDA S2000 AP1 AP2

Compatible Engine: F20C F22C

It is a 4-piece type N1 muffler that best fits with Aero Bumper, Rear [71501-AP1-001]. 

Main pipe 60.5φ → 50.8φ Main silencer 152φ Rear silencer 127φ Outlet diameter 65φ

Remark: 

The AP1 early model genuine rear bumper can be installed with small process (unpainted part cut).

SPOON N1 MUFFLER KIT QUAD FOR HONDA S2000 AP1 AP2 F20C F22C 18000-AP1-040

CSOHARA SILENT SPORTS MUFFLER FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00114

 

CSOHARA SILENT SPORTS MUFFLER FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00114

Compatible Car: 

TOYOTA GR86 ZN8 SUBARU BRZ ZD8

Remark:

Currently only for ZN8/ GR86 and ZD8/ BRZ 6MT models.

This is a Vehicle Inspection Compliant product. It is a muffler developed to be a JQR certified product (vehicle inspection compliant) while having a straight structure that demonstrates true performance in sports driving. 

It has a two-piece structure in the center and rear, but the joint part uses the same plug-in type as the competition model for the purpose of reducing weight and securing ground clearance. 

Ideal sound suppression is possible by using the right side to secure the silencer volume instead of the standard left output.

This is an exceptional combination of high performance and compliance sports muffler for TOYOTA GR86 ZN8 and SUBARU BRZ ZD8.

CSOHARA SILENT SPORTS MUFFLER FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00114

CSOHARA AZUR BPS CSO SPEC COILOVER KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00099

 

CSOHARA AZUR BPS CSO SPEC COILOVER KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00099

The CSO spec, which had demonstrated an overwhelming performance at Fuji, Suzuka and Okayama International from shakedown, has finally been commercialized. 

Sticking to the excellence dimensions and specifications, it is a recommended damper kit for users who want to specialize even more. The stock upper has a camber angle that allows for sports driving. 

Please inquire about the upper mount spring to be combined. It is recommended for users who want to enjoy circuit performance as a top priority.

CSOHARA AZUR BPS CSO SPEC COILOVER KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00099

JUN AUTO EXHAUST HEADER FOR HONDA B18C B16B 5003A-H001

 

JUN AUTO EXHAUST HEADER FOR HONDA B18C B16B 5003A-H001

Vehicle: Honda DC2/ EK9
Spec. (mm)
Material: Stainless
Primary: 45.0
Secondary: 50.0
Tail: 60.5

The JUN AUTO exhaust header for Honda B18C B16B is an excellent piece undergone various stringent processes such as polishing and CNC machining from billet material. 

The JUN AUTO exhaust header for Honda B18C B16B is made with the same processing as the racing part.

Many parameters have strong points such as lightweight, strength, beauty and better exhaust system in term of efficiency.

JUN AUTO EXHAUST HEADER FOR HONDA B18C B16B 5003A-H001

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR AUDI A5 F5DEZL E-0648

 

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR AUDI A5 F5DEZL E-0648

Compatible Engine: DEZ (163ps)
Code: F5 
Displacement: 2.0 L 
Grade / Specifications: 35TDI HYBRID DIESEL TURBO 
Genuine part number: 8W0133843A 
Product brand: K & N 
Product category: Genuine replacement filter

REPLACEMENT 
Filter shape ・ Size: 

Cylindrical (Closed Top) ・ Outer diameter 168 x Inner diameter 78 x Height 148 mm 

Maximum characteristics of genuine cleaner BOX that is not affected by heat in the engine room. A genuine replacement type air filter that can be used to the limit. 

The filter medium uses a unique wet cotton 4-layer filter that has a proven track record and is reliable over many years of racing. 

Achieves excellent response and performance improvement by achieving both suction resistance and filtration performance at a high level. 

Can be used repeatedly by cleaning with the separately sold maintenance kit for K & N (part number 99-5000).

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR AUDI A5 F5DEZL E-0648

REVOLUTION HIGH EFFICIENCY ALTERNATOR RX-8 130A FOR MAZDA RX-8 SE3P RSE3-BA13

 

REVOLUTION HIGH EFFICIENCY ALTERNATOR RX-8 130A FOR MAZDA RX-8 SE3P RSE3-BA13

The high-efficiency alternator is an alternator that achieves low friction while increasing power generation capacity by 30% to 130A compared to the genuine 100A. 

It has been upgraded with higher efficiency, higher output and lower resistance. 
The weight is also about 1.3kg lighter than normal. 

At the time of installation, it is necessary to change the belt size. 
◆ Suitable belt size: 5PK1365

*The belt is not included with the product. 

The black model is +3000 yen.

REVOLUTION HIGH EFFICIENCY ALTERNATOR RX-8 130A FOR MAZDA RX-8 SE3P RSE3-BA13

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC TYPE R FL5 K20C FR-0529

 

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC TYPE R FL5 K20C FR-0529

Compatible Engine: K20C 2.0L TURBO 

Manufacturer: GruppeM 
Brand: M 
Displacement: 2.0 LITER 
Grade / Specifications: Turbo

The specially designed carbon duct has been developed by Gruppem to completely block the hot air in the engine room. 

Fresh air will be directly introduced to lower and stabilize the intake air temperature to the combustion chamber.

Colder air will lead to a better torque and power-up in the entire range from low to high revs. 

You can also enjoy the sporty rattling intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC TYPE R FL5 K20C FR-0529

OKUYAMA ASN OFFICIAL ROLL CAGE FOR ND5RC FULL WELDING FOR MAZDA ROADSTER ND5RC 759-426-0

 

OKUYAMA ASN OFFICIAL ROLL CAGE FOR ND5RC FULL WELDING FOR MAZDA ROADSTER ND5RC 759-426-0

DASH roll bar made of steel 
Number of doors: 2 doors 
Roof: Normal (Soft top) 
No B pillar stopper 
SCM430 is used as the material. (Some STKM13A is used) 

Weight reduction by making connection jointless. 
The joint surface of the pipe has been subjected to ground joint processing (eguri processing). 

Since there is no processing of the roll cage body, the installation time is shortened. 

Official number: Mazda Roadster (ND5RC) JRH-040-17 
Number of points: --- 
No .: --- 
2 people / Capacity: 2 people

OKUYAMA ASN OFFICIAL ROLL CAGE FOR ND5RC FULL WELDING FOR MAZDA ROADSTER ND5RC 759-426-0

ZERO1000 POWER CHAMBER T-2 BLUE FOR HONDA CIVIC SEDAN FC1 102-H024B

 

ZERO1000 POWER CHAMBER T-2 BLUE FOR HONDA CIVIC SEDAN FC1 102-H024B

Engine: L15Bターボ 
Year Mode: 2017.9-
Filter Size: SS
Joint Hose : 60φ straight black
Blow By Hose Size : ---

The power chamber is an intake system that uses intake pulsation to improve power, torque, and response. 

Type 2 uses carbon, a high-class material for the chamber part. Gives significant improvement for performance, weight reduction and also makes engine room looks authentic and real.

A deep true resonate intake sound will gives you good feeling and fresh experience during high performance driving mode. 

ZERO1000 POWER CHAMBER T-2 BLUE FOR HONDA CIVIC SEDAN FC1 102-H024B

J'S RACING AERO BONNET TYPE-V FRP FOR HONDA CIVIC FK8 ABV-K8-F

 

J'S RACING AERO BONNET TYPE-V FRP FOR HONDA CIVIC FK8 ABV-K8-F

Compatible Car: HONDA CIVIC FK8

Material: CFRP / FRP 

Weight : 7.8kg (genuine 9.7kg) 
Civic Type R FK8 type only 

Maximum cooling effect:  -15 ° C (average of -10 ° C). Tested at the Suzuka International Racing Course.

Note: Cannot be installed on FK7 and FC1. 

J’S Racing Aero Bonnet Type-V FRP for Civic FK8 gives significant potential performance increase for Civic FK8 Type R by weight reduction and better cooling effect.

Honda Civic Type R TC (manufactured by Honda Performance Development) for 2020 TC America series officially adopted parts Civic TYPE R. The aero bonnet for exclusive use of Civic TYPE R FK8 finally was revealed.

It is designed to increase the volume of the air intake for extensive engine operations especially for K20C engines.

The K20C engine boasts high output. The V-shaped ducts and main ducts will disperse heat generated from the turbine on the left and right. During high speed, this section will generate negative pressure for highly efficient heat dispersion.

The heat from exhaust affected the total duct area of approximately 150 cm2. J’S Racing Aero Bonnet Type-V FRP improved engine potential by lowering water temperature, oil temperature and intake air temperature. 

J’S Racing Aero Bonnet Type-V FRP proved to be strong enough to withstand high speeds of 220km or more without a bonnet pin (Test vehicle: Boost 1.8kgf / cm2 / 365ps specification ・ Temperature 30 °C ・ No rain protection).

By reducing the weight of the genuine bonnet to 7.8kg, further improved cornering performance is demonstrated and realized.

Since it is compatible with genuine bonnet catch, it can be installed by bolt-on even without a bonnet pin.

The is an exceptional cooling aero bonnet for Civic FK8. This product is made of FRP, and to be painted accordingly.

- Front: Made of FRP 
- Back: Made of FRP * Painting required 
- Genuine bonnet catch compatible product (with metal fittings and bolts installed) 
- Washer nozzle and hose are re-used using the attached clip. 

J'S RACING AERO BONNET TYPE-V FRP FOR HONDA CIVIC FK8 ABV-K8-F

J'S RACING PILLOW ADJUSTABLE REAR UPPER ARM FOR HONDA CIVIC EG6 B16A PRA-H3

 

J'S RACING PILLOW ADJUSTABLE REAR UPPER ARM FOR HONDA CIVIC EG6 B16A PRA-H3

Compatible Car: Honda Civic EG6

Compatible Engine: B16A

Material: Reinforced bush 

1. The basics of FF vehicle setting is rear camber adjustment" 

- A pillow ball is used for the end part 
- Turnbuckle adjustable rear upper arm 
- Arm length can be set arbitrarily 
- The rear camber can be adjusted freely. 

2. By using aluminum 2017S material for the material, it contributes to weight reduction. 

3. By adopting the turnbuckle structure, 
it is possible to significantly improve the alignment workability. 

4. This is an essential special parts for sports driving you’ll appreciate.

J'S RACING PILLOW ADJUSTABLE REAR UPPER ARM FOR HONDA CIVIC EG6 B16A PRA-H3

POWER CRAFT EXHAUST MUFFLER RACING SPEC BLACK TAIL FOR LAMBORGHINI GALLARDO P-LA320103-BKT

 

POWER CRAFT EXHAUST MUFFLER RACING SPEC BLACK TAIL FOR LAMBORGHINI GALLARDO P-LA320103-BKT

Compatible Car: LAMBORGHINI GALLARDO

YEAR: 2003~2005 

MATERIAL: SUS #442~304 

SPEC: 60.5Φ・54Φ 

TAIL: 112ΦTITAN 

TAIL SET: with Racing Straight Catalyzer

POWER CRAFT EXHAUST MUFFLER RACING SPEC BLACK TAIL FOR LAMBORGHINI GALLARDO P-LA320103-BKT

FUJITSUBO LEGALIS R EXHAUST FOR EK9 CIVIC TYPE R 760-52052

 

FUJITSUBO LEGALIS R EXHAUST FOR EK9 CIVIC TYPE R 760-52052

Compatible Car: EK9 CIVIC TYPE R

Compatible Models: 

EK9 Civic Type R body type: E, GF-EK9 engine model: B16B Year: 1997.08 ~ 2000.09

This is a high performance exhaust from Fujitsubo for Civic EK9/ B16B. It gives great advantages on weight reduction and product exhilarating sound to excite during acceleration at mid range RPM.

Acceleration in overall was increased with a higher output recorded. This is a great piece if you’re considering to upgrade your Civic EK9 exhaust, for mild modifications.

Intermediate Acceleration: 

Stock: 5.7 seconds -> Fujitsubo: 5.5 seconds

Max Output:

Stock: 133.3kw (181.3ps) / 8240rpm -> Fujitsubo: 136.7kw (185.9ps) / 8200rpm

Max Torque:

Stock: 158.8N · m (16.2kg · m) / 7410rpm -> Fujitsubo: 164.6N · m (16.8kg · m) / 7660rpm

Weight:

Stock: 17.1kg -> Fujitsubo: 12.6kg

Volume Idling:

Stock: 62dB -> Fujitsubo: 64dB

Middle RPM sound:

Stock: 77dB -> Fujitsubo: 79dB

Max RPM sound:

Stock: 87dB -> Fujitsubo: 86dB

Mid RPM Acceleration sound: 

Stock: 98dB -> Fujitsubo: 105dB

FUJITSUBO LEGALIS R EXHAUST FOR EK9 CIVIC TYPE R 760-52052