DKM Clutch BMW E9X 335i MS Organic Twin Disc Clutch Kit w/Flywheel (660 ft/lbs Torque) MS-006-075

1. The MS Twin Disc Clutch Kits by DKM are designed to hold around 900 Nm at the wheels with organic discs. 

2. The two organic disc setup provides additional contact surface area for higher torque capacity and longer lifecycle. 

3. Each kit is comprised of a pressure plate, organic discs and a steel single mass flywheel. 

4. Additional parts such as pilot bearing/bushing, release bearing (when applicable), alignment tool and bolts are also included.

5. DKM GmbH was established in 2015 as the answer to the lack of performance clutch kits for German vehicles. 

6. Starting as importer of clutch kits, DKM is now producing and assembling the kits in Germany to meet special requirements from customers.

7. Made in Germany with global components.

8. **Fitment:

BMW 335i2007 

BMW 335i Clutch and Flywheel Kit2008 BMW 335i Clutch and Flywheel Kit2009 BMW 335i Clutch and Flywheel KitUp to 1/2009 

BMW 535i2008 

BMW 535i Clutch and Flywheel Kit2009 

BMW 535i Clutch and Flywheel KitUp to 1/2009 

BMW 535xi2008 

BMW 535xi Clutch and Flywheel Kit 

BMW 335xi2007 

BMW 335xi Clutch and Flywheel Kit2008 BMW 335xi Clutch and Flywheel Kit 

BMW 135i2008 

BMW 135i Clutch and Flywheel Kit2009 

BMW 135i Clutch and Flywheel Kit Up to 1/2009 

BMW 535i xDrive2009 

BMW 535i xDrive Clutch and Flywheel KitUp to 1/2009 

BMW 335i xDrive2009 

BMW 335i xDrive Clutch and Flywheel KitUp to 1/2009

DKM Clutch BMW E9X 335i MS Organic Twin Disc Clutch Kit w/Flywheel (660 ft/lbs Torque) MS-006-075

SPOON FRONT AND REAR SET RIGID COLLAR FOR FORD MUSTANG GT (50261-MUS-000)

 

SPOON FRONT AND REAR SET RIGID COLLAR FOR FORD MUSTANG GT (50261-MUS-000)

Rigid Collar is a special design part made by SPOON from tempered aluminum. 

It is inserted between the body and subframe by lifting up the vehicle, loosening the joint bolts one by one, then tightening them back together. 

The tapered portion of Rigid Collar deforms as the bolt is tightened, filling the gap between the bolt and the inner wall of the bolt hole.

Effects:
(1) Reduce annoying vibration and shaking that occurs when the engine starts.
(2) Decrease in vibration will mean reduction in cabin noise.
(3) Better straight-running stability, docile rolling and reduce corrective steering.
(4) Improve straight line stability, compliant roll characteristics and reduce amount of steering corrections.
(5) Smooth overall driving will reduce fatigue on long drives.

SPOON FRONT AND REAR SET RIGID COLLAR FOR FORD MUSTANG GT (50261-MUS-000)

 

BUDDY CLUB P-1 Limited Edition Bucket Seat (FPR) BC08-P1BKS(x-x)

This BUDDY CLUB P-1 Limited Edition Bucket Seat was built with an exceptional quality, safety and leading ergonomics built in. 

BUDDY CLUB’s vast experience and knowledge gained through the development of professional motorsport has been used to create this high performance seat for road use. 

This seat offers excellent lateral support, firm and comfortable hard wearing twill fabric with exceptional safety.

Great advantages as below:

1. FRP construction for ultra lightweight and maximum strength.

2. Improved cushion design to aid comfort.

3. 5 harness slots.

4. High sides from increased lateral support.

5. Hard friction suede trim for increased support.

High performance cars with sports driving mode need the best seat to improve handling and driving operations. BUDDY CLUB P-1 got all it takes for that.

BUDDY CLUB P-1 Limited Edition Bucket Seat (FPR) BC08-P1BKS(x-x)

BLITZ NUR-SPEC F-TI EXHAUST SYSTEM TITANIUM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 67157

 

BLITZ NUR-SPEC F-TI EXHAUST SYSTEM TITANIUM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 67157

Year Model: 2021/09-
Ex-GAS Code: 3BA-ZN8 3BA-ZD8 -

Engine: FA24 
Style: Custom edition
Tail Style: Carbon red 2.5R
Tip O.D.: φ120 round-× 2
Tip Count: 2
Pipe Size: φ60 
Pieces Count: 3
Sound Level Stock/Blitz: 83/88

BLITZ NUR-SPEC F-TI EXHAUST SYSTEM TITANIUM FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 67157

HKS SUPERIOR SPECR EXHAUST FOR NISSAN GT-R R35 VR38DETT 31025-AN005

 

HKS SUPERIOR SPECR EXHAUST FOR NISSAN GT-R R35 VR38DETT 31025-AN005

Muffler Style: SUPERIOR specR
Style: SSR
Material: Ti
Tip O.D.: 124 x 4
Pipe Size: 85
Consist of: 2

Close Sound Level Stock: L88 R89
Close Sound Level HKS: L87 R86
Idling Sound Level Stock: L68 R68
Idling Sound Level HKS: L67 R68

**Not applicable to GT-R Nismo. Vehicles released after 2010/11 require modification of the stock aluminum air guide plate. 

**Applicable only to JDM "Pure Edition" for 2017 models.

HKS SUPERIOR SPECR EXHAUST FOR NISSAN GT-R R35 VR38DETT 31025-AN005

SPOON CARBON BONNET FOR HONDA CIVIC B16A B16B 60100-EKA-010

 

SPOON CARBON BONNET FOR HONDA CIVIC B16A B16B 60100-EKA-010

The carbon material use by SPOON is strong, lightweight with unique texture known to automotive world. 

The hood of the EG and EK series has been reduced in weight by approximately 1/2 from the standard 15.5kg to 8.2kg only.

In a front-heavy front-wheel drive vehicle, this weight reduction reduces understeer, provides quick turning, reduces the burden on the brakes and improves acceleration performance.

All these advantages will give good handling characteristics that are essential for sports driving or performance driving.

SPOON takes advantage of the lacy black carbon fiber texture with installation is the same locking method as STD, bonnet pins are not required. 

SPOON CARBON BONNET FOR HONDA CIVIC B16A B16B 60100-EKA-010

KREISSIEG SPIRAL BYPASS PIPE EXHASUT FOR FERRARI F355 M2.7 F355-05

 

KREISSIEG SPIRAL BYPASS PIPE EXHASUT FOR FERRARI F355 M2.7 F355-05

Compatible Car: FERRARI F355 M2.7

Material: Stainless steel 
The exhaust pipe improved response so you can enjoy the F1 sound.

KREISSIEG SPIRAL BYPASS PIPE EXHASUT FOR FERRARI F355 M2.7 F355-05

 

AMS Performance BMW M3/M4/M2C S55 Charge Pipes (F80/F82/F83/F87) AMS.39.09.0001-1

1. Application(s):

- 2015-2018 BMW M3 - w/ S55 3.0L Turbo Engine (F80 Chassis - Incl. All Submodels) | - 2015-2020 BMW M4 - w/ S55 3.0L Turbo Engine (F82 and F83 Chassis - Incl. All Submodels)

- 2019-2021 BMW M2 Competition - w/ S55 3.0L Turbo Engine (F87 Chassis)

2. The AMS Performance BMW S55 Charge Pipes for F80 M3, F82 & F83 M4, and F87 M2 Competition provide maximum airflow for maximum horsepower and torque. 

3. Increasing the size of the charge pipes on the S55 engine by up to 72% will allow for more airflow resulting in the greatest increase in HP and torque. 

4. Designed as a complete package including both upper Charge Pipes and lower J-Pipe, each pipe is powder coated in wrinkle black for good looks and durability and features a screen printed ALPHA logo. 

5. Features: CNC machined billet compressor outlet flanges, 6061 T6 aluminum tubing, and an integrated 1/8 NPT port for methanol injection or nitrous.

6. Result: The AMS Performance BMW M3/M4/M2C S55 Charge Pipes are the perfect replacement for the failure-prone OEM plastic piping.

AMS Performance BMW M3/M4/M2C S55 Charge Pipes (F80/F82/F83/F87) AMS.39.09.0001-1

 

Skunk2 92-95 Honda Civic Front Lower Control Arm w/ Spherical Bearing (CX/DX/EX/LX/Si/VX) skk542-05-M440

1. Fitment:1992 - 1995 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)1994 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R).

2. Skunk2 Racing had announced the release of its Spherical Bearing Front Lower Control Arms for the '92-'95 Civic and '94-'01 Integra. 

3. The race FLCA’s are based on the same technology Skunk2 been using in its own race cars for over 20 years.

4. FEATURES:

Improved 60ft Times 

Accurate Suspension Geometry Under Aggressive Driving

High Load Steel Spherical Bearings

TIG Welded 

Precision Bearing Cups

Brand New Direct Replacement Arms – No Core Needed

Corrosion Resistant 

Yellow Zinc Platting Steel 

Misalignment Bushings

No Core Charge

5. Skunk2 Racing’s Spherical Bearing Front Lower Control Arms for the '92-'95 Civic and '94-'01 Integra are direct replacements that greatly improve OEM suspension geometry. It will increase freedom of motion on multiple axes simultaneously and eliminating suspension bind. 

6. Spherical Bearing Front Lower Control Arms offer the hardcore racer and discerning enthusiast the best performance to excite.

7. Skunk2 uses brand new direct replacement cores rather than beat up used ones, saving you headaches associated with getting a used set that is potentially bent or damaged. 

8. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings. They are retained in the lower control arm with precision machined bearing sleeves that have been press-fit and TIG welded for redundancy. 

9. Each spherical bearing is locked into the sleeves with removable Spirolox, giving you the ability to service or replace when needed.

10. Skunk2 Racing Front Lower Control Arms are recommended for no-nonsense track cars or extreme performance streetcars. 

11. For maximum suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers and Strut Tower Bars

12. Skunk2 Racing Front Lower Control Arms are recommended for no-nonsense EG/ DC2 chassis track cars or extreme performance streetcars. 

13. For maximum suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers and Strut Tower Bars.

Skunk2 92-95 Honda Civic Front Lower Control Arm w/ Spherical Bearing (CX/DX/EX/LX/Si/VX) skk542-05-M440

 

Duraflex M1 Sport 20mm Front Fenders - 2 Piece for Mazda Miata '90-'97 EXD115812

1. This is a 1990-1997 Mazda Miata Duraflex M1 Sport 20mm Front Fenders - 2 Piece

2. Enhance your Mazda Miata 1990-1997 with these gorgeous 2-piece from fenders from Duraflex.

3. More aggressive looks, better stability and aerodynamic are among advantages to be considered.

• Hand laid, high quality 6 oz. fiberglass
• Signature black finish
• High quality weather resistant aluminum mesh grille (where applicable)
• Proprietary polymer blend for maximum flexibility
• Increased durability and longer service life
• Modified Aerodynamics
• Reduced damage rate up to 75%
• Limited warranty and satisfaction guarantee

Duraflex M1 Sport 20mm Front Fenders - 2 Piece for Mazda Miata '90-'97 EXD115812

GRUPPEM RAM AIR SYSTEM FOR BMW 5 SERIES NB50 FRI-0311

 

GRUPPEM RAM AIR SYSTEM FOR BMW 5 SERIES NB50 FRI-0311

Compatible Engine: S85B50A

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: E60 / 61 
Displacement: 5.0 LITER 
Grade / Specifications: M5

1. This special designed carbon duct from GRUPPEM has been developed to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. It will give good torque and power-up in the entire range from low to high revs. You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR BMW 5 SERIES NB50 FRI-0311

M&M HONDA SPORTS INJECTION SYSTEM FOR CIVIC EP3 00401-EP3-T001

 

M&M HONDA SPORTS INJECTION SYSTEM FOR CIVIC EP3 00401-EP3-T001

1. This is a 4-throttle sports injection with one throttle per cylinder from M&M.

2. The sports injection with blowing up from low speed to high rotation characteristic. Compatible with B type, K type, F type VTEC racing engine.

3. It accelerates with good response while playing a high-pitched intake sound. It is controlled by a dedicated ECU (Fulcon). 

4. Completely equal length type for each cylinder. Expansion of straight port throttle valve area. 

5. Funnel shape optimization of injector setting position Funnel selection / CIVIC EP3 ​​Throttle diameter φ50mm / Funnel 33mm Throttle diameter φ50mm / Funnel 63mm Injector nozzle is reused.

6. Does not work with a genuine ECU. You need a dedicated computer. ECU settings are required. 

7. The immobilizer, air conditioner, idling, etc. work normally, recommend to install the Super Carbon Intake Box.

M&M HONDA SPORTS INJECTION SYSTEM FOR CIVIC EP3 00401-EP3-T001

5ZIGEN EXHAUST MANIFOLD PRO RACER HEADER FOR HONDA CIVIC FD2 BHOEX17-P

 

5ZIGEN EXHAUST MANIFOLD PRO RACER HEADER FOR HONDA CIVIC FD2 BHOEX17-P

Compatible Car: HONDA CIVIC FD2

Model Year: FD2: H19-3~ TYPR

1. This in an excellence exhaust manifold from 5ZIGEN that gives a smooth exhaust for efficient intake. 

2. Ultra-precision bending and surface finishing exhaust manifold from 5ZIGEN to guide the exhaust gas discharged from the valve without stress or hassle.

3. Without interfering with the complex layout in the engine room, 5ZIGEN's ideas and expertise with racing scenes, the ideal shape perfect shape aaa realized.

4. Specifications
Stainless steel (SUS304)
TIG welding (except for some parts)
4-2-1 assembly type
*Gaskets other than the split part not included. n
Main pipe diameter: 42.7Φ→50.8Φ→60.5Φ
Number of divisions: 2

5. Other remarks: 

4-2-1E/G side and catalyst connection part gaskets are genuine reuse. 

Attached gasket for EX manifold joint. 
Type: Car inspection compatible
JASMA certification number: 07E002

5ZIGEN EXHAUST MANIFOLD PRO RACER HEADER FOR HONDA CIVIC FD2 BHOEX17-P

GARAGE VARY INTAKE DUCT (FRP) INTRODUCTION DUCT (FRP) FOR SUBARU BRZ ZD8 30-3103

 

GARAGE VARY INTAKE DUCT (FRP) INTRODUCTION DUCT (FRP) FOR SUBARU BRZ ZD8 30-3103

Compatible Car: SUBARU BRZ ZD8

Model: ZD8

Year: From July 2021 (R3)

A duct that leads fresh air directly to the air cleaner. 

Cut a part of the bumper and install it

Made of FRP, unpainted product

GARAGE VARY INTAKE DUCT (FRP) INTRODUCTION DUCT (FRP) FOR SUBARU BRZ ZD8 30-3103

 

aFe Takeda Cat-Back Exhaust System for Honda Civic Sport 17-20 L4-1.5L (t) afe49-36624-P

Performance Gains:
In testing, the cat-back exhaust system resulted in gains up to +10 horsepower and +11 lbs. x ft. of torque, as measured on aFe in-house dyno.

Aggressive Sound:
Dual, free-flowing, 304 stainless steel mufflers are used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential.

Dual 4-3/4" x 4-1/2" Oval, Double-Wall, Angle-Cut Black Exhaut Tps:
This dual rear-exit system features oval, double-wall, angle-cut, black stainless steel exhaust tips w/ laser-etched Takeda logo for a custom apperance

Installation is a snap:
This Takeda exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Perfect Fit:
OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit.

Leak-Free Seal:
High quality band clamps are used for a complete 360-degree sealing surface.

Fitment Note:
This item will only fit Sedan models

Emissions Disclaimer:
This product does not require a CARB EO#

All aFe exhaust systems are engineered and manufactured in aFe Corona, California facility.

aFe Takeda Cat-Back Exhaust System for Honda Civic Sport 17-20 L4-1.5L (t) afe49-36624-P