Porsche, Honda, Audi, Volkswagen, Ford, Dodge,Toyota, Subaru, Mitsubishi, Mercedes

Sunday, October 15, 2023

Akrapovic 2019 Toyota Supra (A90) Sound Kit akrP-HF1220

 

Akrapovic 2019 Toyota Supra (A90) Sound Kit akrP-HF1220

Akrapovic 2019 Toyota Supra (A90) Sound Kit akrP-HF1220


1. The optional Akrapovič Sound Kit enables owners of selected Akrapovič car exhausts to control the sound of the system from the cockpit of their machine.

2. Using Akrapovič technology, drivers can easily switch between the quiet mode and a sportier sound. 

3. With the use of a receiver to drive the actuators that open or close the valves at the end of the exhaust system, drivers can use the Sound Remote Controller or the new smartphone app (for iOS and Android) to regulate the valves.

FEATURES

  • Control the sound of your Akrapovic exhaust system from the cockpit
  • Easily switch between quiet mode and a sportier sound
  • Drivers can use the Sound Remote Controller or the smartphone app (for iOS and Android) to regulate the valves

Please Note: With the use of the optional Akrapovič Sound Kit, the ECE type approval is no longer valid.




Boundary Pumps Billet Oil Pump Gear Ford Coyote V8 Mustang AND GT350 2011-UP CM-OPG-Mustang

 

Boundary Pumps Billet Oil Pump Gear Ford Coyote V8 Mustang AND GT350 2011-UP CM-OPG-Mustang

Boundary Pumps Billet Oil Pump Gear Ford Coyote V8 Mustang AND GT350 2011-UP CM-OPG-Mustang


1. Boundary Pumps give you a pump with stability over 9000 RPM, proven in excess of 2000WHP.

2. It was engineered with higher efficiency, less friction and backed by one of the industries best warranty's.

3. Boundary oil pump gears are 100 percent manufactured in Dallas, Texas production facility. 

4. Start by quenching chromoly billets from extreme heat and then temper it to tough indestructible core. 

5. Apply Boundary Pumps ColdFlow surface hardening process after machining and complete it to a Mirror Finish.

Oil Pump Gear Features

  • Mirror Finished and Surface Hardened
  • Surface Ground gears for the ultimate in fitment and performance
  • Indestructible chromoly core
  • Inner and outer gear machined in matched sets
  • Our own race inspired gerotor design for flow and strength
  • Each set hand, machine, and hardness inspected with Blueprinting Report


TOMEI FUEL PUMP FOR MITSUBISHI EVO 4 - 9 4G63 183011

 

TOMEI FUEL PUMP FOR MITSUBISHI EVO 4 - 9 4G63 183011

TOMEI FUEL PUMP FOR MITSUBISHI EVO 4 - 9 4G63 183011


1. Upgrading performance engine via turbos and camshafts alone to increase horsepower are not enough. 

2. High performance larger turbos and cams need more fuel to feed the engine to match the increased air flow. 

3. More fuel to deliver require more effective fuel pump.

4. This excellence Tomei 255L/h fuel pump will suit most powerful engines for more power increase.

5. This pump is quiet and doesn’t need much electrical power. 

6. This is a great performance fuel pump with an attractive cost to be considered.

7: APPLICATION: Mitsubishi EVO 4~9 183011


Greddy Stainless Turbo EX Manifold for Toyota Supra JZA80 10511014

Greddy Stainless Turbo EX Manifold for Toyota Supra JZA80 10511014

 

Greddy Stainless Turbo EX Manifold for Toyota Supra JZA80 10511014

Compatible Engine: 2JZ-GTE 

1. This is a stainless steel exhaust manifold that adopts a layout that is nearly equal length for greater efficiency.

2. It will lead the exhaust gas to the turbocharger in a more efficient manner for greater performance.

3. The main pipe diameter and the waist gate line diameter are designed to efficiently work with the turbine.

Fit turbine:. TD05 / TD06 / T67 Twin 
Main / gate line diameter: 42.7φ / 50.8φ 
Turbine set position: head set 
Can be mounted West gate: R / C

Greddy Stainless Turbo EX Manifold for Toyota Supra JZA80 10511014

ALPHA R35 GT-R Carbon Fiber Intake Pipes For Stock Manifold Turbos ALP.07.08.0008-1

 

ALPHA R35!GT-R Carbon Fiber Intake Pipes For Stock Manifold Turbos ALP.07.08.0008-1

ALPHA R35 GT-R Carbon Fiber Intake Pipes For Stock Manifold Turbos ALP.07.08.0008-1


1. The most sought Alpha R35 GT-R Carbon Fiber Cold Air Intake was designed to draw a higher volume of cool air into the stock turbochargers.

2. At same time will improve the metering capability of the factory Mass Airflow (MAF) sensors. 

3. With this ALPHA intake installed, bulky air filter boxes are replaced with a high flow dry media filters and carbon fiber tubing. 

4. This will eliminate clutter within the engine bay while drawing cooler air from outside. 

5. Increasing the cross sectional area of the tubing allows the factory MAF sensors to accurately meter air flow up to and over 1000HP! 

6. A vast improvement from ALPHA intake over the stock intake system.

7. The OEM manufacturer spends a lot of time reducing turbo noise at the expense of horsepower. 

8. Allowing the turbos to ingest all the cold air they need, the ALPHA Carbon Fiber Cold Air Intake boosts power significantly. 

9. You will hear the turbos spool up while bypassing valve venting, something an enthusiast like you will truly appreciate.

10. Utilize Motorsports High Temp Carbon Fiber as the intake pipes are close to the exhaust manifold for better temperature resistant. 

11. Other intakes in the market use the typical gloss clear coated carbon fiber than prone to discoloration and cracking. 

12. ALPHA Intakes use 3-layers of 1mm twill weave prepreg carbon fiber capable of sustaining a 240C temperature threshold.

13. At same time maintaining structural integrity and aesthetic appearance with no worry of fading or yellowing over time.

14. ALPHA Intakes are specifically designed for a hassle-free installation and maintenance.

15. Super easy installation without cutting, trimming or taking off your bumper like other aftermarket air intake.

16. Done with basic hand tools in minutes with reusable synthetic high-flow dry media filter, no longer have to purchase cheap factory paper filters.

17. The best intake in the market, for use with all stock 2 Bolt Compressor Housings.

18. Originally designed to complement Alpha 7 Performance Package that maximize the performance of the factory Nissan GTR turbos.

19. ALPHA Intake support a magnanimous horsepower well over 1000HP! 

20. Couplers are compatible with factory turbo inlet pipes (2011 and older & the larger 2012+) as well as other aftermarket inlets which use the stock 2 bolt compressor/ turbo inlet suction pipe configuration.

21. Should you ever exceed the limits of the stock MAF sensors, the ALPHA R35 GTR Carbon Fiber Cold Air Intake can easily be upgraded to operate as speed density by:
- simply adding the ALPHA R35 GT-R MAF Block-Off Plates.
- ECU Tuning Required (because the pipe size offsets the calibration of the factory MAF sensor, it requires an aftermarket ECU calibration)

22. Recommend to use the Cobb AccessPort, but the intake is compatible with all other ECU calibration solutions as well.

23. With all those advantages, order your ALPHA R35 GTR Carbon Fiber Cold Air Intakes today!

24. Exclusive Benefits
- Air flow to support over 1000HP
- Polished high-temp motorsports grade carbon fiber
- Easy install requiring no trimming, cutting or bumper removal
- Turbo and blow-off valve (BOV) more audible
- 4 lb. weight savings over stock
Includes:
* (76mm) diameter carbon fiber air intakes
* Alpha Performance high-flow, dry media air filters
* 5-ply reinforced silicone couplers
* All necessary hardware included
* Detailed installation instructions

25. Applications
2009-2011 (CBA) Nissan R35 GT-R
2012+ (DBA) Nissan R35 GT-R
Fits all USDM, JDM and European Models (LHD & RHD)

**For use with stock turbos or upgrades with 2 bolt compressor cover/ inlets

**Notes
A. Because this intake system is hand-laid and made from a motorsports grade high temp carbon fiber, small imperfections in the carbon weave and finish will be present. 

B. Again, these are not the typical high gloss wet carbon pieces with clear coat applied as a post process. 

C. With each pipe being handmade, no two will show exactly alike.



xTune 06-08 BMW E90 Sedan Halogen Model Only OEM Style Headlights - Right and Left spy9050015

 

xTune 06-08 BMW E90 Sedan Halogen Model Only OEM Style Headlights - Right and Left spy9050015

xTune 06-08 BMW E90 Sedan Halogen Model Only OEM Style Headlights - Right and Left spy9050015


1. BMW E90 06-08 Sedan Halogen Model only ( Do not Fit Coupe and HID Model )

2. These arw OEM Style Headlights - Left + Right

SKU | UPC:
9050015 | 887769050015

3. Adding HID/ LED bulbs will void warranty



Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

 

Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A


1. Project Mu's high quality bolt on brake cooling duct for Scion FR-S and Subaru BRZ.

2. This is absolutely a great choice for your brake system’s improvement. 

3. The additional cooling will significantly reduce brake fade and rotor wear. 

4. These are direct fit behind the rotors and the 2” inlets can be connected to scoops or to vents in your bumper. 

5. Sold as a pair for front brakes only. 

*Note* Cooling hoses are not included. 



Mishimoto X-Line Radiator for Mazda Miata '90-'97 misMMRAD-MIA-90X

 

Mishimoto X-Line Radiator for Mazda Miata '90-'97 misMMRAD-MIA-90X

Mishimoto X-Line Radiator for Mazda Miata '90-'97 misMMRAD-MIA-90X


1. Upgrade your cooling system with Mishimoto's X-Line radiator for better performance.

2. This lightweight, triple-core radiator will enhance the performance and cooling efficiency of your engine either for daily driver or a race application. 

3. Mishimoto X-Line radiator features 100 percent brazed aluminum construction and polished end tank.

4. Each is included a Mishimoto high-pressure 1.3 bar radiator cap. 

5. Mishimoto X-line radiator will help your engine to reach its true full potential.



Saturday, October 14, 2023

Reinhard Cannonball Double Muffler Semi Titanium Exhaust for Toyota Supra JZA80TB 2JZ-GTE RH-1141TI

 

Reinhard Cannonball Double Muffler Semi Titanium Exhaust for Toyota Supra JZA80TB 2JZ-GTE RH-1141TI

Reinhard Cannonball Double Muffler Semi Titanium Exhaust for Toyota Supra JZA80TB 2JZ-GTE RH-1141TI

Year: 93.05~97.08 

EXP: 76.3Φ 

Specifications Tail size: 115Φ shell Dual 90ΦW Type

Compatible Material: Semi-titanium 

  • Corresponds to all type of car with ordinary design of exhaust
  • High exhaust efficiency rate and high output without sacrificing low-mid speed by the straight structure, for better performance 
  • Adopting the light weight hang-in stay (excluding some car)
  • Possible to fit the inner silencer


P2M Rear Lower Control Arms for Lexus SC300/400 '91-'00 P2-RLCALZ30-HC

 

P2M Rear Lower Control Arms for Lexus SC300/400 '91-'00 P2-RLCALZ30-HC

P2M Rear Lower Control Arms for Lexus SC300/400 '91-'00 P2-RLCALZ30-HC


1. The P2M adjustable rear lower control arm is a must have for all Lexus SC300/ 400.

2. This is a common replacement for SC300/ 400 due to worn out OE bushings.

3. The worn out bushings create a lot of slap movement especially for lowered car. 

4. Combine with P2M rear toe and traction links, the whole rear end can be dialed in precisely based on the purpose of the vehicle.

5. Customized from high quality strong dom steel tubing:
-high gloss powder coat finish for rust prevention
-3pc Teflon rod end that is self lubricating with dust boot.



SPL Rear Knuckle Bushing Kit for Mazda Miata ND '16+ SPL-RKB-ND

 

SPL Rear Knuckle Bushing Kit for Mazda Miata ND '16+ SPL-RKB-ND

SPL Rear Knuckle Bushing Kit for Mazda Miata ND '16+ SPL-RKB-ND


1. The Rear Knuckle Bushing Kit for the Mazda SPL ND Miata gives smooth articulation, deflection and compliance to great requirements.

2. Eliminate issues with regard to your rear suspensions for better ‘street car’ performance. 

3. The rear knuckle bushings in the SPL Mazda ND Miata are rubber injected bushings with metal sleeves in them. 

4.  When you are pushing your car to it's limits, OEM knuckle bushings are not capable to support that.

5. Under extreme conditions, the OEM bushings will bind and deflect causing unwanted changes to the alignment making it difficult to hold the car at peak grip. 

6. Replacing with a full spherical solution from SPL will eliminate all artificial spring rate and mushiness from your rear suspension. 

7. Will give car tyres their full potential grip during high performance driving. 

Applications:

2016+ Mazda ND Miata



Verus Engineering Vortex Generator Kit - Ford Mustang Shelby GT350/GT350R A0307A

 

Verus Engineering Vortex Generator Kit - Ford Mustang Shelby GT350/GT350R A0307A

Verus Engineering Vortex Generator Kit - Ford Mustang Shelby GT350/GT350R A0307A


1. The Shelby GT350R features a lot of aerodynamic components from the factory. 

2. Verus Engineering spotted detached flow on the rear glass during analysis.

3. Detached flow in this area increased drag and reduces flow due to the location of the factory wing.

4. This will causes the factory rear wing to not work as hard as it can.

5. Adding Verus Engineering vortex generators, your factory GT350R will reduce drag and increase downforce over the factory setup.

 
Verus Engineering Vortex Generator Kit - Ford Mustang Shelby GT350/GT350R A0307A



6. With Verus Engineering rear wing installed, you will still get the benefits of the reduced drag but the downforce increase will no longer be there. 

7. The vortex generators are part of the Ventus 1 kit which increases downforce slightly and reduces drag from the factory vehicle.

8. These units are produced from 2x2 twill carbon fiber and install within 30 minutes with double-sided tape.

9. WHAT IS INCLUDED
• (6) Carbon Fiber Vortex Generator
• (6) 3M Double Sided Tape
• (1) Install Template

10. FEATURES
• Reduction in Drag by 0.003, or 3 Points
• OEM Fit and Function
SPECIFICATIONS
• 2x2 Twill, Pre-Preg Carbon
• Simple Install
• 3M Double-Sided Tape


HARD Motorsport Oil Cooler Kit BMW E9X 335i '07-'10 E9XOILCOOLKITTN54

 

HARD Motorsport Oil Cooler Kit BMW E9X 335i '07-'10 E9XOILCOOLKITTN54

HARD Motorsport Oil Cooler Kit BMW E9X 335i '07-'10 E9XOILCOOLKITTN54


1. The N54 is well known for it's performance and the ability to adapt to higher boost levels. 

2. However, high oil temperature problems are well known in the N54 engines.

3. Eliminate further cooling issues by supplementing the factory oil cooler with an additional unit. 

4. The kit allows you to run the factory cooler along with HARD Motorsport Oil Cooler to eliminate oil cooling issues at once.


Friday, October 13, 2023

MXP SP Cat-Back Exhaust Toyota 86 TRD Edition MXSPFT86TRD

 

MXP SP Cat-Back Exhaust Toyota 86 TRD Edition MXSPFT86TRD

MXP SP Cat-Back Exhaust Toyota 86 TRD Edition MXSPFT86TRD


1. MXP branded exhausts are made of the highest quality of stainless steel available. 

2. Made from stainless steel SUS304, which is slightly thicker than competitors exhaust system offered in the market. 

3.Thou a bit thicker, the extra thickness helps improve lasting durability and performance for the long term. 

4. MXP exhausts are significantly lighter than OEM exhaust with added thickness for durability and light weight reduction, 

5. MXP exhausts will increase performance for your car.

FEATURES:

Material : SUS304 Stainless Steel
Layout / Weld Type: Four-piece / TIG welded
Muffler(s) / Resonators: Twin mufflers, one resonator
Inner Diameter : 67.2mm
Outer Diameter : 70mm
Flanges : Slip Fit, Stamped SS (1.7mm)
Tip Design : Quad Adjustable, Burnt color, 107.8mm Dual Wall, Slant Cut,
Hangers: Five, solid


REVOLUTION GT COOLING BONNET FOR TOYOTA SUPRA A90 A90-GTCB

 
REVOLUTION GT COOLING BONNET FOR TOYOTA SUPRA A90 A90-GTCB

REVOLUTION GT COOLING BONNET FOR TOYOTA SUPRA A90 A90-GTCB

1. This Revolution GT Bonnet will maximize radiator efficiency by improving bay cooling.

2. This high performance bonnet comes with a removable rain cover. 

3. The cooling time during circuit driving can be greatly reduced. 

4. Twill weave carbon is 17kg for the genuine product, but this product is only 11kg.