Forge Motorsport Induction Kit for Hyundai i30N and Veloster N FMINDK28

**Hyundai boast figures of 275bhp and 278lb.ft on standard vehicle. 

**Forge Motorsports CAT backed performance exhaust + this intake on the dyno reached 296bhp and 310lb.ft.

**This aftermarket cold air intake system from Forge Motorsports improves your i30N’s airflow in few ways:

1. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. 

2. Improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. 

3. Cold air intake system is set up to allow cooler air to easily flow into your engine

4. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. 

5. The pipework is specifically designed to feed the turbo without interruption. 

6. The large filter introduced had provided flows of 60% more air than the stock filter.

**The induction acoustics under acceleration improves the driving experience and adds a better performance to the Hyundai’s 2.0 four pot engine.

**Forge Motorsports collaboration with renown filtration guru, Pipercross also gives significant credit to this. With over 25 years’ experience in both the domestic and motorsport market.

**The intake is finished off with Forge Motorsports unique black thermal powder coating. This kit comes with Forge’s usual detailed fitting guide to help make installation as easy as possible.

**During testing (with replicated wind speed at 70MPH + bonnet shut), there is no inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C.

In the Box:
1 x Black Alloy Hard Pipe
1 x Pipercross Filter
1 x Valve Silicon Joiner
2 x Hose clamps

Forge Motorsport Induction Kit for Hyundai i30N and Veloster N FMINDK28