AAM Competition 3 in. True Dual Exhaust Titanium Burnt Ends for Nissan 350Z AAM35E-MFTD3-T

The AAM 3” Competition True Dual exhaust system is a perfect match for any turbocharged 350Z, including 800rwhp+ competition setups.

1. The AAM Competition 3" True Dual Exhaust System is the highest flowing exhaust systems available for the 350Z. 

2. This exhaust has been designed to support the most demanding volume and velocity flow requirements. 

3. The AAM Competition exhaust system comes with a specially designed 3” inner diameter flange on each side. Bolted directly to either the factory cat pipes or most aftermarket 2.5” test pipes. 

4. Twin mandrel bent 3” polished stainless steel T-304 16 Gauge exhaust tubes run along each side of the 350Z’s under carriage. 

5. Two high-flow stainless steel resonators will ensure straight through flow and a deep exhaust note.

6. By decreasing thermal load, the AAM Competition 3" True Dual exhaust system provides the maximum reliability for your VQ35 engine and its internal components. 

7. Preliminary testing has shown gains over 40rwhp on high horsepower turbocharged 350Z cars compared to original equipment. 

EXCLUSIVE BENEFITS

- Highest Flowing Exhaust System Available for the 350Z
- Engineered to provide Aggressive Deep Tone with Minimal Drone
- Proven to support over 800+rwhp
- T-304 Stainless Steel Flanges

FEATURES

- Precision TIG welded T-304 Stainless Steel
- Includes All Necessary Gaskets & Hardware for Installation
- Made in the USA

4-6 Weeks is their typical build time.

AAM Competition 3 in. True Dual Exhaust Titanium Burnt Ends for Nissan 350Z AAM35E-MFTD3-T

 

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I 323I 325I 330I 530I 540I M3 M5 D550-1004

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I/ 323I/ 325I/ 330I/ 530I/ 540I/ M3/ M5E30/ E36/ E39/ E46

Features:

- A precise 20-25% throw reduction

- Counter balanced to reduce effort 

- Two piece 416 stainless steel & aluminum stick assembly 

- Two piece stick provides vibration free operation 

- Dampened pivot cup with self lubricating pivot ball 

- Polymer glide T-500 lower pivot bushings

1. Dinan's billet short-shifter kits effectively reduce the amount of throw necessary to make gear changes providing a sportier feel. 

2. Larger BMW models with larger gearboxes require more leverage to make the gear changes. BMW employs different shift handle configurations for various applications. 

3. The Dinan short shifters are application-specific to achieve an appropriate reduction of throw. 

4. Dinan's short-shifters retain the nylon pivot ball and shifter bushing providing the same smooth and quiet operation as the original shifter.

5. Other manufacturer's shifters employ metal components that tend to be noisier and induce a notchy feel. 

6. The DINAN billet short-shifter is also rubber isolated for a solid feel and vibration-free operation. 

7. Simple to install. Zero maintenance. Dinan's billet short-shifter has a 20% to 25% reduction in throw with a self-lubricating bearing for the ultimate in smooth short shifter technology.

NOTE:

Not compatible with the 6-speed manual that was introduced for the 2004-06 model years on the 330i/ci (this includes all ZHP cars) nor the 2001-05 325xi/330xi.

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I 323I 325I 330I 530I 540I M3 M5 D550-1004

 

Verus Engineering High Efficiency Rear Wing - BRZ/GT86/FRS A0020A

FEATURES

• Optimized Airfoil Using ANSYS Adjoint Solver

• Improved Efficiency (L/D)

• Reduced Drag

• Increased Downforce

• Bolts to OEM Trunk

• Capable of Generating and Withstanding 300+lbs of Downforce

• Properly Sized for Most off the Shelf Front Aero Solutions

SPECIFICATIONS

• Carbon Fiber Rear Wing, with Carbon Nomex Infill

• Billet Aluminum Mounts and Uprights

• Recessed Mounting on Airfoil for Improved Aerodynamics

• Uprights are Knife Edged on Rear and Rounded on Front for Improved Aerodynamics

• Stainless Support Plate for Trunk

• Stainless Hardware Throughout

Verus Engineering started the rear wing design with a clean slate approach, utilizing own airfoil profile created using ANSYS' adjoint solver. 

Resulted the born of a great wing that is highly efficient, generates significant downforce appropriate for the typical track day goer and street enthusiast. 

By utilizing a swan neck mounting style, Verus Engineering is able to keep efficiency up by feeding the wing clean airflow, unlike typical bottom mount rear wings.

The low drag force produced by this wing is perfect for the ZN6/ ZC6 chassis due to the limited horsepower the FA20 produces in stock form. 

This means corner speeds will increase without a large hit to straight-line top speed, an equilibrium of performance between corners and straight-line.

WHAT IS INCLUDED

• Rear Wing Element Assembly

• Rear Wing Uprights, Machined Aluminum (2)

• Rear Wing Trunk Mount, Machined Aluminum (2)

• Rear Wing Strengthening Bracket (2)

• Hardware Kit, Includes All Parts Necessary for a Seamless Install

Verus Engineering High Efficiency Rear Wing - BRZ/GT86/FRS A0020A

 

DINAN Tension Strut Ball Joint Kit for Toyota Supra GR D280-0022

FEATURES:

• Improved steering responsiveness.
• Reduces brake shimmy.
• Nylon-lined bearings for quiet operation.
• Machined aluminum housings.
• Sealed bearings.

BMW drivers want the visceral feel of being connected to the road as the road-racing heritage of BMW M demanded. 

Dinan embraced this and over the years mastered its craft into a kit that not only satisfied the desire for proper road feel but also made it livable for everyday driving. 

While stock suspension properties may have swayed from its golden era lineage to more mainstream ideals, Dinan is here to correct those mistakes for those that want a more M -passioned BMW experience. 

The Dinan Tension Strut Ball Joint Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. 

Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. 

The quietest bearings on the market are virtually noise-free so you can live with them every day. 

These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them from wearing out prematurely.

DINAN Tension Strut Ball Joint Kit for Toyota Supra GR D280-0022

 

SPL Porsche Lower Control Arm Kit for 996/ 997/ Boxster/ Cayman SPL LCA 996

Applications:

1999-2005 Porsche 911 (996) Front and Rear

2005-2012 Porsche 911 (997) Front and Rear

1997-2004 Porsche Boxster (986) Front

2005-2012 Porsche Boxster (987) Front

2005-2012 Porsche Cayman (987) Front

SPL Parts Porsche Lower Control/Trailing Arms Feature:

•    Lightweight Aluminum and Titanium construction

•    Gun drilled 2024-T351 Aluminum Trailing Link provides superior strength while reducing unsprung weight

•    Rotating Clamp design allows for easy access to lock down your alignment settings

•    Heat treated and electroless nickel plated 4340 Chromoly ball joint shanks

•    Computer Aided Design with the aid of Finite Element Analysis

 •    Low friction 3 piece Teflon lined FK Spherical and Heim Joints/Rod Ends

•    Multiple size Stainless Steel roll center and anti dive/squat spacers for precise adjustment  

SPL Porsche Lower Control Arm Kit for 996/ 997/ Boxster/ Cayman SPL LCA 996

 

Carbon Fiber Air Dam for BMW F80/82 M3/M4 2014-2018 - FA-830402 aprFA-830402

Underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance.

Carbon Fiber Air Dam for BMW F80/82 M3/M4 2014-2018 - FA-830402 aprFA-830402

 

HPS Performance Cold Air Intake Kit for Honda Civic 1.5L Turbo '22-'24

Fitment Information:
1. 2024 Honda Civic 1.5L Turbo (EX, Si, Touring)

2. 2023 Honda Civic 1.5L Turbo (EX, Si, Touring)

3. 2022 Honda Civic 1.5L Turbo (EX, Si, Sport Touring, Touring)

Product Highlights:

1. Improves acceleration with dyno proven gains up to 5.8 horsepower and 8 lb-ft. of torque.
2. Enhanced induction sound throughout the engine's rev range.
3. Open element design uncovers a deeper induction tone under heavy throttle.

4. 2-3/4" mandrel-bent aluminum tubing and reusable high-flow cotton cone air filter for optimized air flow.
5. Easy bolt-on installation using simple hand tools.

Included in the kit:
1. HPS Performance aluminum intake tube- 2. HPS Performance Air Filter (Washable and Reusable)
3. HPS Performance 100% Stainless Steel T-Bolt Clamps
4. HPS Performance High Temperature Reinforced Silicone Couplers
5. Mounting hardware- Installation Instruction

Product Information:
Product Type: 837 Series Performance Air Intake Kit

Dyno proven performance gains:

1. Horsepower 5.8 Whp , Torque 8 Ft/lbs

2. Intake Tube Material: Aluminum
3. Intake Tube Size: 2-3/4 inch
4. Warranty: 2 Years
5. Street Legal In All US States: No- 6. California Restricted: Not legal for sale or use in California
6. TUV Approved (Europe): No
7. Weight: 6 lbs
8. Shipping Box Dimension: 24 inch x 12 inch x 12 inch

HPS Performance Cold Air Intake Kit for Honda Civic 1.5L Turbo '22-'24

 

BC Racing BR Series Coilovers - Mazda RX8 N-05

1. This is BC Racing BR Type Coilovers - Mazda RX8, the BR model that is perfect for street driving and occasional road course duty.

2. Features easily accessible adjustment knobs for fine tuning your compression/ rebound and separately adjustable ride heights.

3. You may choose how low or high you want, no preset ride height here and BC Racing patented concave lower locking ring keeps it locked in.

4. All of BC Racing systems come with Pillowball Mounts (If applicable) to provide the most feedback possible from your suspension and to sharpen your steering response.

5. BC's available front and rear camber plates also allow you the perfect alignment setup without compromise. All this while providing a strong, attractive looking coilover system. 

6. Features:

*Mono-tube shock design 

*30 levels of damping force adjustment, adjust Compression/ Rebound 

*Pillow ball mounts and adjustable camber paltes(where applicable) 

*Separate full length height adjustable 

*One year warranty 

*Rebuildable 8K/ 6K Spring Rate

BC Racing BR Series Coilovers - Mazda RX8 N-05

 

APR Performance Carbon Fiber Radiator Cooling Shroud ( Center) for Honda Type R 2017 up aprCF-917001

The flow of air is not only limited to the outside of your Honda Type R by this radiator cooling shroud from APR. 

To maximize cooling capabilities, your radiator needs a direct flow of air to allow an engine to maintain consistent temperatures on the race track. 

Because of structural gaps above the radiator, the flow of air could escape making the radiator not as efficient as it could be. 

To help improve the flow of air into the radiator, APR Carbon Fiber Radiator Cooling Plates can be utilized to channel the flow of air directly to the radiator. 

This will improve the efficiency of the radiator while adding a high-tech, race inspired look to your engine bay.

APR Performance Carbon Fiber Radiator Cooling Shroud ( Center) for Honda Type R 2017 up aprCF-917001

 

APR Performance 2015-UP Corvette C7/ZO6 Fender Vents for Chevrolet Corvette C7/ZO6 2015 2019 aprCF-700802

1. Excessive heat can cause major and expensive damage to critical components in a car. 

2. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. 

3. APR Hood Vents help channel out excessive heat that builds up in the engine bay . 

4. Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio.

5. APR Hood Vents really add both function and "lightness" where it counts to your Corvette C7/ZO6.

APR Performance 2015-UP Corvette C7/ZO6 Fender Vents for Chevrolet Corvette C7/ZO6 2015 2019 aprCF-700802

 

OS Giken Super Lock LSD Spec-S: Toyota Supra 93-96 D-TD102061405-S (A)

1. OS Giken utilized its extensive accumulated racing knowledge and engineering experience to develop its own limited slip differential. 

2. Four years of extensive R&D had lead to a new and revolutionary of LSD. A superior design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total). This is an OS Super Lock LSD!

3. The increased number of plates dramatically improved OS Giken LSD design's locking force and enables it to lock fully and completely. 

4. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. 

5. As expected from OS Giken, their LSDs are not only made from the highest quality materials but also from precise machining, forged gears and sound engineering that makes their LSDs the most durable and reliable race performance LSDs available.

*5 Speed only

OS Giken Super Lock LSD Spec-S: Toyota Supra 93-96 D-TD102061405-S (A)

 

VR Forged D05 Wheel Package 20x10 20x11 Camaro 5th-6th Gen Gloss Black VRF-D05-CAM6-GBLK

Fitment:

• Chevrolet Camaro 5-6th Gen

Information:

• All VR Forged wheels include center caps.
• They are designed to work with most OEM TPMS sensors.
• Some wheels may require aftermarket lug nuts or bolts.
• Weights are estimated from engineering and scale tests.
• Wheels are designed to work with OEM brakes and most big brake kits.
• All wheels go through extensive testing to meet proper regulations..

Front Wheel Specs:

• Diameter: 20x10
• Offset: 24mm
• Bolt Pattern: 5x120
• Center Bore: 66.9
• Wheel Finish: Gloss Black
• Wheel Weight (KG): 
• Load Racing (KG): 690KG
• Lug Style: Conical
• Recommended Tire Size: Please Consult a Specialist

Rear Wheel Specs:

• Diameter: 20x11
• Offset: 38mm
• Bolt Pattern: 5x120
• Center Bore: 66.9
• Wheel Finish: Gloss Black
• Wheel Weight (KG): 
• Load Racing (KG): 690KG
• Lug Style: Conical
• Recommended Tire Size: Please Consult a Specialist

VR Forged D05 Wheel Package 20x10 20x11 Camaro 5th-6th Gen Gloss Black VRF-D05-CAM6-GBLK

 

aFe Momentum GT Cold Air Intake System for Ford Mustang GT 18-20 V8-5.0L afe50-70033R

The aFe Momentum GT Cold Intake System for Ford Mustang GT is a race-inspired styling, with excellence performance improvement to note. 

• Dyno-Proven Gains up to +18 HP and +15 Lbs. x Ft. TQ
• Outflows Factory Intake by 28%
• Measured Flow: 635 CFM @ 7” H20
• Durable One-Piece XLPE Housing Captures Air Directly from the Front of the Vehicle
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation

aFe Momentum GT Cold Air Intake System for Ford Mustang GT 18-20 V8-5.0L afe50-70033R

 

APR Performance C7 Spoiler Delete Carbon Fiber Spoiler for Chevrolet Corvette C7 2014-2019 aprAS-105721

1. The APR Performance Rear Deck Spoiler integrates with the vehicle's rear deck to: 

a) Reduce rear-end turbulance 

b) Increase the efficiency of a rear wing.( ex. GTC-500 C7 Spec)

2. Features: Factory-like fitment This vehicle-specific component is designed to match the contours of the vehicle's rear deck area, for a factory-like fitment. 

3. Carbon Fiber Construction. This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight. 

4. UV Resistant Coating Each Rear Deck Spoiler is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant). 

5. Mounting Hardware Included Screws, nuts and bolts are all included to allow you to install the APR Rear Deck Spoiler to your vehicle.

APR Performance C7 Spoiler Delete Carbon Fiber Spoiler for Chevrolet Corvette C7 2014-2019 aprAS-105721

 

Skunk2 Alpha Series 92-00 Honda Civic Radiator (Half Size) (Dual Core) (Manual Trans.) skk349-05-2000

1. This is Skunk2 Alpha Series 92-00 Honda Civic Radiator (Half Size) (Dual Core) (Manual Trans.).

2. Skunk2’s all-aluminum, Alpha Series Radiator for the '92-'00 Civic is designed to dramatically increase both cooling efficiency and engine performance.

3. The Alpha Series Radiators are manufactured from lightweight and durable aluminum, feature 100-percent brazed cores and include polished end tanks with Skunk2’s signature Alpha logo embossed along each side. 

4. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities with a genuine Skunk2 Radiator Cap for maximum performance and premium appearance. 

5. Each Alpha Series Radiator also includes provisions for the OEM cooling fan. Skunk2’s commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards.

6. With that, each radiator may be installed without modification to the vehicle and is compatible with OEM cooling fans and shrouds. 

7. Skunk2’s Alpha Series Radiators are the perfect addition to any high-performance vehicle and were designed for streets or tracks.

8. Fitment: 1992 - 2000 Honda Civic (1.6L DX/EX/GX/HX/LX/Si). This Skunk2 Racing Radiator features a 1.25" inlet and outlet. 

9. The factory hose(s) ID measure just over 1.00" and may not fit on this radiator.

10. SPECIAL NOTE: 

Dual-Core Design - Not Compatible w/ Automatic Transmission Cooling System or OEM Air Conditioning Condenser Fan.

Skunk2 Alpha Series 92-00 Honda Civic Radiator (Half Size) (Dual Core) (Manual Trans.) skk349-05-2000

 

Deatschwerks DW400 Series Fuel Pump w/ Fitment Kit for Mazda Miata '89-93 Mazda MX-5/Miata dwk9-401-1042 

The DW400 is the highest flowing in-tank fuel pump on the market meant for your Mazda Miata ‘89-‘93.

Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. 

An E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. All DW fuel pumps are backed by a 3-yr no fault warranty.

These new fitment kits include the DW400 fuel pump plus everything needed for your specific application including hose, clamps, electrical harness, filter and any other specialty parts needed for installation.  

Step-by-step instructions are available for most applications. As with all DW products, the pump is warrantied for 3 years to the original purchaser.

Features:

• 500LPH open flow, 415LPH at 40psi
• Outflows Walbro 450 "e85" by 31% (70-100 psi)
• Rated to 120psi total fuel pressure
• Carbon commutators for e85 compatibility

Deatschwerks DW400 Series Fuel Pump w/ Fitment Kit for Mazda Miata '89-93 Mazda MX-5/Miata dwk9-401-1042 

 

VR Aero Carbon Fiber Rally Wing Subaru STI Hatchback Only 2008-2014 VR-GRBH-610

VR Aero has reintroduced one of the most popular and hard to get double deck wings for the Subaru WRX Hatchback 08-14. 

The VR Aero Carbon Fiber Rally Wing features an adjustable carbon fiber mid-deck 'airfoil' with fiberglass mounting base and side mounts. 

Each VR Aero Wing is manufactured using the highest quality composites materials and craftsmanship to ensure a top notch product. 

The VR Aero Carbon Fiber Rally Wing is a direct OEM replacement that utilizes factory mounting locations for installation. 

Each wing comes primed, but may require additional body work prep before paint.

Features:

• Adjustable mid-deck spoiler
• 2x2 carbon fiber weave
• Direct OEM replacement
• Aggressive styling

Fitment:

• Subaru STI Hatchback 08-14

VR Aero Carbon Fiber Rally Wing Subaru STI Hatchback Only 2008-2014 VR-GRBH-610