APR Carbon Fiber Intake System AUDI S6 S7 CI100045

This is an ultimate intake upgrade for the Audi S6 and S7 (C8). It flows 33.5% more than stock, reduces pressure drop and improves linearization across the turbos. 

This impact directly translates to +23 AWHP and +21 AWFT-LBS of torque making this a simple upgrade for more power you can feel. 

APR system is a full upgrade as it replaces all of the intake components from the inlet scoop all the way to the turbo inlets. 

This is an extremely important as focusing on the airbox alone does not address the main restrictions found in the factory intake system. 

APR system flows better than stock, makes more power, puts less strain on the turbochargers, looks sexy under the hood with the gorgeous carbon fiber design and enhances the sound of the engine. 

The factory turbocharger inlet pipe is a big restriction point because it's small. It's common for most intake systems to only focus on the filter and airbox, but doing so only has minimal impact on performance. 

Furthermore, upgrading the turbocharger inlet pipe only has minimal impact on performance if it still necks down to the factory or aftermarket intake airbox. 

APR solved this issue by making the pipe as large as possible from the 4" filter outlet all the way to the turbocharger inlets in one piece.

This had minimized pressure drop and increases flow through the system far better than a multi-piece solution. 

APR system is made from carbon fiber and looks absolutely stunning under the hood. 

APR system works as a heat shield but is open on the bottom and side to allow for a larger filter and maximum airflow. 

This keeps air temps down and increases sound without it being overbearing. The filter is massive as well. 

A big filter is desirable as increasing filtered surface area keeps the filter breathing easily for many miles as it filters dirt, dust and particles in a more effective manner.

It is measured 7" by 7" with a 5.5" frontal inlet and a 4" outlet. The filter media is a washable pleated cotton gauze that can be cleaned for extended life, or replaced with ease. 

APR kit includes everything you need to bolt-on and go. No new tuning is needed, and the product is emissions friendly. APR include all new OEM gaskets and all the nuts, bolts and clamps needed for an easy install. 

The APR billet turbo inlet adapters is awesome, this is the only intake you'll ever need. Should you later upgrade your turbo, new, larger adapters can be installed to adapt to the larger inlets simply by swapping out the billet adapters.

APR Carbon Fiber Intake System AUDI S6 S7 CI100045