AMS Performance Toyota GR Supra Chopped Carbon Fiber Air Intake 20th Anniversary Limited Edition AMS.38.08.0001-2

THE 20TH ANNIVERSARY LIMITED EDITION VERSION OF THE GR SUPRA INTAKE IN A SPECIAL CHOPPED CARBON CONSTRUCTION GIVING IT AN EXCLUSIVE FORGED CARBON LOOK. 

Applications:
2020 Toyota GR Supra w/ B58 3.0L Turbo Engine
2021 Toyota GR Supra w/ B58H 3.0L Turbo Engine (*Does not fit with factory strut tower bracing unless additional spacers are used*)

The AMS Performance Toyota GR Supra Chopped Carbon Fiber Air Intake kit was designed to draw a higher volume of cold air into the stock turbocharger. 

With this intake installed, the factory plastic filter box and plastic intake tube are replaced with this AMS Performance motorsport; grade matte carbon fiber components and dry media air filter. 

The AMS Performance MKV Supra Carbon Fiber Air Intake Kit is a vast improvement over the stock intake system.

From AMS Performance extensive SnailWorks Engineering Team, R&D testing has shown a massive 25% increase in airflow efficiency.

Advantages:

25% Reduction in Airflow Restriction (Pressure Drop)
Draws a Higher Volume of Cold Air
Enclosed Intake Completely Seals Out Hot Engine Bay Air
Motorsports Grade, Hand Laid Carbon Fiber
Durable Billet Aluminum Mounting Hardware
No Yellowing or Fading Over Time
Even Distribution of Cold Air Across Filter
Dry Media Filter means Easy Cleaning and NO Oil

AMS Performance is an engineering company with decades long reputation as a leading motorsports aftermarket component manufacturer.

AMS Performance creates the highest performing parts through a focused engineering approach into a high end design. 

This engineering process at AMS Performance makes the MKV Supra Carbon Fiber Air Intake the best designed intake system on the market.

The largest component of the MKV Supra Carbon Fiber Intake is the sealed cold air intake box. 

AMS Performance SnailWorks Engineering Team knows that heat is the biggest power robbing factor that plagues other inferior intake system designs. 

The air box was designed to seal out blistering engine bay temperatures. The intake piping has been increased to 90mm for increased airflow and for future compatibility with larger aftermarket turbo compressor cover inlets. 

This is a massive 26.5% increase in cross sectional area over the factory system, which has flow reducing corrugations and reduces to 65mm at the compressor cover inlet. 

Whether you plan on leaving the turbo stock or going with an aftermarket unit, this intake system has you covered.

It can be installed with basic hand tools in minutes. Couple that with a purpose built, reusable synthetic high-flow dry media filter, you’ll no longer have to purchase cheap factory paper filters down the road. 

The washable MKV Supra synthetic media filter was designed and manufactured specifically to fit this high performance automotive application.

The filter size and configuration was fine tuned to ensure that it will still provide all the necessary air for any MKV Supra, including upgraded turbo cars without any substantial restriction or compromise in filter efficiency.

The new large AMS airbox was specifically designed to distribute airflow evenly over the entire circumference of the intake filter by allowing air to swirl around it. 

This means greater distribution of cold airflow across the filter resulting in lower pressure drop and a longer filter life between cleanings. 

The AMS Performance MKV Supra Carbon Fiber Intake Kit is engineered to deliver a 25% reduction in pressure drop which leads to better efficiency and more power. 

Because the Supra MKV uses a torque based ECU tuning strategy, AMS Performance SnailWorks Engineering Team has found out that horsepower is not significantly changed with any aftermarket engine components.

Yes, unless proper ECU calibration is made to take advantage of the new hardware components. AMS Performance had added a larger turbocharger to test Supra and found 0 HP gains without tuning. 

Something interesting to think about on claims on certain aftermarket product of horsepower gains without ECU calibration! 

KIT INCLUDES
Limited Edition Chopped Carbon Fiber Sealed Airbox
Limited Edition Chopped Carbon Fiber Intake Tube
Rubber Grommet Airbox Seal
Dry Media Filter
Billet Aluminum Brackets and Stanchions
All Necessary Mounting Hardware
Online Installation Instructions

AMS Performance Toyota GR Supra Chopped Carbon Fiber Air Intake 20th Anniversary Limited Edition AMS.38.08.0001-2