Vargas Turbo VTT A90/91 Supra Carbon Fiber Driveshaft VTT-SUPRA-DRIVESHAFT-CF
Why overpay for an MK5 Supra CV Driveshaft?
1. VTT is proud to offer a great Carbon Fiber Driveshaft for the A90/91 Supra made exclusively by PST, one of the leading names in CF driveshaft technology.
2. This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks and U-Joints.
3. All pieces are then bonded using PST's proprietary process and balanced to within 1/8 In/Ounce.
4. The driveshaft was matched with VTT Custom 7075 aluminum adapters which convert the 3 bolt BMW bolt pattern to the 4 bolt Spicer yolk pattern and one heavy-duty CV Joint.
5. This driveshaft is rated at 3000 ft/lbs of torque with more than 10,000RPM.
6. Made in the U.S.A
7. Features:
- 1 VTT/PST CF Driveshaft
- 1 Rear 7057 Aluminum adapter
- 1 Front 7075 Aluminum adapter
- 6 M8 Rear CV joint bolts
- 3 M10 Rear flange bolts
- 3 M10 front flange bolts, and nuts
- 1 Small tube of Loc-tite medium thread locker
9. The exact standards:
- The shaft is bonded to an exclusive-design 7075 forge aluminum tube yoke
- Tube integrity is validated via a bi-directional 3,000 ft/lbs torque test
- Computer balanced to less than a ⅛ ounce/inch variance as an assembly
10. PSTnmaximize torsional strength by using two different wind angles during the manufacturing process.
11. This technique creates a driveshaft with less stress on the driveline.
12. SFI Certification for this carbon fiber driveshafts can be obtained by request during ordering.
13. This upgrade will change all the factory Guibos into a solid aluminum version.
14. This changes may lead to vibration happen from the drivetrain from mild to severe. The drivetrain pieces shall be perfectly aligned.
15. VTT recommended to use Medium Threadlocker to all bolts and these were given.
16. An effective horsepower improvement from A90/91 Supra shall be aligned with superior driveshafts for better result.
No comments:
Post a Comment