Porsche, Honda, Audi, Volkswagen, Ford, Dodge,Toyota, Subaru, Mitsubishi, Mercedes

Thursday, September 7, 2023

HKS HKS Camshaft and Valve Spring Set for Nissan R35 GT-R hks22002-AN038

 

HKS HKS Camshaft and Valve Spring Set for Nissan R35 GT-R hks22002-AN038

HKS HKS Camshaft and Valve Spring Set for Nissan R35 GT-R hks22002-AN038 

1. HKS had adopted a great concept of high performance, focusing for a well-balanced power curve without sacrificing output in any rotation range. 

2. Extraordinary performance is achieved by increasing the lift in combination with a specially designed valve spring. 

3. When combined with the HKS STEP2 specification engine and the GT800 full turbine kit, it will improve startup and achieve a maximum output of over 850 horsepower.

4. This is a great horsepower improvement camshaft from HKS for R35 GT-R. An exceptional option for build up project.

■Features

POINT-1 Material for exclusive use of HKS

  • Utilize HKS exclusive chill material.

POINT-2 Must be used with dedicated valve springs.

  • Both opening and lift are larger than genuine and require special valve spring for higher lift. 

POINT-3 Optimal design of cam profile

  • The lift value is selected comprehensively based on head dimensions and flow test implementation.

POINT-4 Valve timing is set the same as the genuine one

  • The phase of the dowel pin that determines the position with the cam pulley is the same as the original, so the valve timing is the same as the original.
  • Since the trigger position of the cam sensor is the same as the genuine one, it is a setting that does not induce malfunction of the genuine ECU.

POINT-5 Reliability by grasping the situation of genuine parts and producing optimally designed products in-house

  • All operations from processing, inspection, packaging, and shipping are carried out at HKS, ensuring thorough quality control and providing the best products to our customers.
  • MADE IN JAPAN (manufactured in-house by HKS).

■ Specifications

 genuineHKS
IN side valve lift (mm)9.211.0
EX side valve lift (mm)9.511.0
IN side valve operating angle238°270°
EX side valve operating angle248°278°
Base diameter (mm)35.535.5
IN-VP (mm)-2.6
EX-VP (mm)-8.7

4. As you may see from the table above, all specific parameters were increased in parallel with the design intend- to increase the perfect performance. 

HKS HKS Camshaft and Valve Spring Set for Nissan R35 GT-R hks22002-AN038

No comments:

Post a Comment