MagnaFlow Exhaust - Street Series V6 Camaro 10-15 mag15353

1. Made in the USA and engineered to last. An excellence horsepower improvement exhaust system.

2. MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound and the wide-open performance power.

3. Feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. 

4. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. 

• All Mandrel Bent Tubing 

• 409 Stainless Steel Construction 

• Increased Horsepower and Torque 

• Lifetime Construction Warranty 

• Made in USA

5. Features:
Piping: 2.50in
Tip Size: 4.00in
Tip Style: Polished Stainless
Muffler: 5x8x14in
Exit Quantity: Dual
Muffler Body Shape: Oval
System Type: Cat-Back
Tip Quantity: 2
Muffler Body Material: Stainless
Sound Level: Moderate
Tip Type: Double Wall/Angle Cut
Exhaust Pipe Material: Stainless
Exit Location: Dual Split Rear
Main Piping Diameter: 2.5
Muffler Body Finish: Polished
Muffler Body Length: 14
Tip Finish: Polished
Muffler Configuration: Offset/Center
Muffler Outlet Diameter: 2.5
Muffler Overall Length: 14
Tip Length: 7
Tip Shape: Round
Attachment Style: Clamp-On
Color/Finish: Stainless
Material: Stainless
Muffler Body Diameter: 5 x 8
Muffler Body Width: 8
Muffler Type: Straight-Through
Tip Material: Stainless
Tip Diameter: 4
Exhaust Inlet Connection Type: Clamp-On
Muffler Inlet Diameter: 2.5
Components: Band Clamp=4
Muffler Body Height: 5
Muffler Quantity: 3

MagnaFlow Exhaust - Street Series V6 Camaro 10-15 mag15353

 

ISR Performance Mazda Miata NB Titanium Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB-Ti

1. The all new Titanium Circuit Spec features the same great styling of the standard Circuit Spec exhaust.

2. BUT is fully constructed out of Titanium, resulting in a super light weight and unique sounding exhaust.

3. This exhaust features a 3 piece design. The front and mid section are made using 2.5" Titanium with a slip fit joint. The rear section utilizes a titanium muffler with 4" tip. 

4. Features:

• 1x Titanium muffler with 4'' tip
• 1x Mid Section
• 1x Front Section
• 2x 2.5" Exhaust gaskets 
• 4x bolts
• 4x Nuts
• 1x Clamp

5. IMPORTANT NOTE3

• This exhaust has not been tested on the turbo mazdaspeed model

ISR Performance Mazda Miata NB Titanium Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB-Ti

 

Scotidi 05-14 Mustang Drift Spec Control Arm Set - With Spindle Adapter 001-008-0264

1. Minimal Design, Maximum Angle.
• 2 piece arms make caster adjustments on the car easy!
• Capable of 70° of steering angle! (depending on wheel size/offset)
• Minimum 2.5" over stock length
• Adjustable Length
• Rod end rear mount point that replaces the soft bushing
• All solid rod end connections, no bushings
• Can be used with stock spindle using the included adapter kit
• Wrinkle black powdercoat

2. For track use only, not D.O.T approve.

Scotidi 05-14 Mustang Drift Spec Control Arm Set - With Spindle Adapter 001-008-0264

 

VRSF 3.5" N54 & N55 Race Catback Exhaust E90 & E92 07-13 BMW 335i 335is vrsf10902025

1. The VRSF 3.5" Catback Exhaust for N54 & N55 335i is the best for significant horsepower improvement.

2. The 3.5" mandrel bent design significantly reduces flow restrictions present in the OEM system which results in faster spool and MORE POWER.

3. Race Catback: The race version of this exhaust eliminates the muffler and shaves an additional 14 lbs of weight over the standard street exhaust. 

4. The Race Version is a bit louder than the street version and is the best for track use.

5. Features:

• Hand crafted, TIG welded 3.5" stainless steel.
• 100% 304 grade stainless steel construction.
• Over 40lbs of weight savings over the stock exhaust
• Fully adjustable/replaceable tip design.
• Mandrel bent, smooth radius bends to decrease turbulence and increase flow.
• Gaskets & Clamps included.
• VRSF-No Hassle-Lifetime Warranty.

6. Application: 

- 2007 - 2012 E90/E92 BMW 335i & 335IS - RWD Models Only

7. Note: 

- This exhaust was designed to fit RWD Models only. This will not fit XI or convertible models.

VRSF 3.5" N54 & N55 Race Catback Exhaust E90 & E92 07-13 BMW 335i 335is vrsf10902025

 

HKS Lexus IS-F SSM Exhaust (2008+); Includes: SUS304 Y-pipe & rear sections hks32023-AT001

1. Produce high frequency sport sound right after acceleration. 

2. An exhilarating sporty sound from the SSM begins the moment the accelerator is pressed.

3. Not too loud while cruising. Quiet at idling. 

4. Echo out a true performance sound quality whether on idling, daily driving or during spirited driving. 

5. HKS used the latest sound control technology to develop exhaust systems that are tuned to the driver’s desire.

HKS Lexus IS-F SSM Exhaust (2008+); Includes: SUS304 Y-pipe & rear sections hks32023-AT001

 

5 Zigen SP Street Catback For Nissan R35 GT-R SP1002

1. Zigen in collaboration with Esprit Japan had developed a street exhaust system for the R35 GTR. 

2. To the goal is to achieve linear power gain all through out the rpm range.

3. Specs:
- 304 SUS Stainless Piping
- 80mm high flow main pipe split into 60.5mm dual pipe rear section
- Inconel flamed exhaust tips
- 25 lbs weight VS stock 42 lbs
- 90 decible noise level
- Special order ~ 2 to 3 months lead time, - - - 100% pre-payment needed at time of order with no cancellation.

5 Zigen SP Street Catback For Nissan R35 GT-R SP1002

 

 

Tubi Style Race Catalytic Converter 280hp Alfa Romeo Giulia Veloce 2016 TSALFGV16.303.A

1. Material: AISI 304 Stainless Steel

2. Main Pipe Dimension: 65

3. Catalytic Converter Removal: 200 cells

Tubi Style Race Catalytic Converter 280hp Alfa Romeo Giulia Veloce 2016 TSALFGV16.303.A

 

Tillett B1 Carbon Race Car Seat TIL-B1

I. Excellence for street and performance cars with weight at only 3kg. 

2. This is the highest end road car seat in Tillet range famously installed in Lamborghini, Nissan GT-R and BMW M3 to name a few.

3. The superior sculpture surface is great for various conditions be it on streets or tracks with stylish appearance.

4.The seat can be run with or without pads, and the pads can be special order customized to fit the interior style. 

5. The seat has a regular sedan seating angle and can accommodate a full racing harness or a standard 3 point car seat belt. 

6. All B1 seats come with a Dinamica suede-covered headrest pad. Matching back and cushion pads are available as an add-on option, which add about about 1 kg of weight. 

Tillett B1 Carbon Race Car Seat TIL-B1

 

MagnaFlow Stainless Cat-Back Exhaust for Lexus IS350 '13+ mag15227

1. Magnaflow has introduced a stainless cat-back performance exhaust system for the 2014 Lexus IS350.

2. The dyno-tested systems feature twin stainless mufflers with fully-welded 2.5" mandrel-bent stainless tubing, exiting to a pair of 4.0" polished stainless tips.

3. The systems are performance tuned to produce a smooth, deep exhaust note, and come with all the necessary installation hardware and lifetime warranty.

4. Typical installation time: 60-90 minutes

5. Kit comprise of:

• 5x8x14in. Muffler
• 2.5in. Tubing
• 4in. Polished Tips
• 100% Stainless Steel
• Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower & Torque
• Great Sound, Smooth Deep Tone

MagnaFlow Stainless Cat-Back Exhaust for Lexus IS350 '13+ mag15227

 

Corsa 15-16 Ford Mustang GT Convertible 5.0L V8 Black Sport Cat-Back Dual Rear Exit cor 14341BLK

1. Adopt on “Aggressive Performance Sound”, acoustically styled.

2. No drone system from RSC Technology that eliminates problematic frequencies that caused resonance.

3. This is a great exhaust system to improve horsepower and torque via patented non restrictive straight through design that gives additional power and reduce back pressure.

4. Construct from premium 304L Stainless Steel with limited lifetime warranty. Comes together with TORCA SS304 clamps.

Corsa 15-16 Ford Mustang GT Convertible 5.0L V8 Black Sport Cat-Back Dual Rear Exit cor 14341BLK

 

AAM Competition GT900-R Turbocharger Upgrade - Nissan R35 GT-R AAMGTRT-GT900-R

1. This unit is blessed with magnificent features: 

• Full Ball Bearing Garrett GT30R CHRAs
• 1000 HP (940+ awhp) capability with high boost and appropriate fuel
• 700-750+awhp on 93oct capability
• Capable of Mid 9 Second and 150mph trap speeds in the 1/4 mile
• Custom Garrett Compressor Covers increase flow
• Precisely CNC'd OE Turbine Housings
• Bolt-On Package including new enlarged coolant & oil lines
• Ultra Responsive (spools within approximately 400rpm of the stock turbochargers)
• Explosive Mid Range Power
• Support up 32+ psi

Note: Requires intake system, sold separately. Now includes W/G Actuator & Brackets.

AAM Competition GT900-R Turbocharger Upgrade - Nissan R35 GT-R AAMGTRT-GT900-R

 

Tubi Style Race Exhaust System Lamborghini Countach 74-90 tubi02010012000

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Main Pipe Dimension: 60

4. Sound: Tubi Sound

5. End Tips Design: Oblique Cut

6. End Tips Dimension: D70

Tubi Style Race Exhaust System Lamborghini Countach 74-90 tubi02010012000

 

DINAN COLD AIR INTAKE - 2007-2010 BMW 135I 335I D760-0030

1. The single factory intake is quite restrictive and the engine will has less air required for maximum power. 

2. The Dinan cold air intake force the 3-liter turbocharged inline 6 with greater volumes of cool oxygen-rich air. 

3. The Dinan cold air system is very effective that the air temperature is 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. 

4. The system is a direct replacement for the factory air box lid with simple replacement. 

5. Features:
- More Power: Up to + 14 HP @ 6000 RPM, + 16 LB-FT @ 3400 RPM (coupled w/ engine software)
- More Power: + 5 HP @ 6000 RPM, + 6 LB-FT @ 3400 RPM
- Increased engine output across the power band
- Carbon Fiber construction
- Sealed system for maximum insulation from power robbing heat
- Additional secondary inlet (and filter) for additional air flow
- Less restrictive filter element for optimum flow (stock location)

6. NOTES:
- Not compatible with vehicles equipped with the M aerodynamic bumper.
- Dinan Performance Engine Software recommended for optimum performance and drivability.

DINAN COLD AIR INTAKE - 2007-2010 BMW 135I 335I D760-0030

 

DINAN HIGH PERFORMANCE INTERCOOLER - 2011-2013 BMW 3-SERIES D330-0015

 

1. The Dinan intercooler gives a magnificent 93% increase of flow.

2. Observed greater power achievement with this larger high performance intercooler.

3. Reduce the pressure drop by 0.7 psi that increased the efficiency of the heat exchange.

4. Reduce "Cool down" to produce full power under various driving mode.

5. As a direct replacement for the stock unit, only minor modifications needed. 

6. This intercooler produced 5HP additional horsepower with Stage 2 Performance Engine Software. 

7. Improved thermal efficiency will enhance turbocharger reliability. 

8. The intercooler may also be used with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure for better efficiency. 

9. Dyno results for Stage 3 engine software Dinan Intercooler, Dinan Oil Cooler and Free Flow Exhaust:

- Peak power of 398 HP @ 5700 RPM

- 429 TRQ @ 4300 RPM.

10. Features:
- Replaces factory intercooler with 2x larger intercooler.
- Intercooler includes shrouds to direct air to cooler and avoid spillage.

NOTE:
Not compatible with the M-Tech bumper for the E92/E93 335i application. Nor is the intercooler compatible with vehicles equipped with Active Cruise Control.

DINAN HIGH PERFORMANCE INTERCOOLER - 2011-2013 BMW 3-SERIES D330-0015

 

ARMYTRIX Stainless Steel Valvetronic Exhaust System Quad Matte Black Tips Porsche Macan 2.0T 2015-2020 PM20T-QS30M

1. ARMYTRIX is the ultimate exhaust upgrade for the Porsche Macan. 

2. Stainless steel fabrication delivers incredible weight reduction, at no expenses of losing quality and performance. 

3. Top craftsmanship protects the integrity and functionality of the system. The free flowing x-Pipe ferries a high capacity of exhaust volume, heightening the overall performance capacity. 

4. A fiercer and significant amplification and resonance of the exhaust note across the entire range.

5. The valvetronic system gives  a new dimension of versatility; never compromise between sound and stealth. 

6. The ARMYTRIX OBDII dongle system reduces the installation time by 50%.

7. Includes:

• Front Pipe
• Mid Pipe Section 1
• Section 2
• Valvetronic Mufflers
• Wireless Remote Control Kits
• Quad Matte Black Tips

8. Features:

• Power ( HP): 13.4
• Torque ( Nm): 20.4
• Weight Saving (-Kg): 2.2
• Reduction of Installation Time by 50% compared to traditional cable wires
• Comprehensive Selectable Options
• Real time Update of Selected Categories
• Quick & Accurate Data Logging
• App Controlled Valve System via OBDII Port
• View Install Instructions Here.

9. Fitment:

• Porsche Macan 2.0T 2015-2020

ARMYTRIX Stainless Steel Valvetronic Exhaust System Quad Matte Black Tips Porsche Macan 2.0T 2015-2020 PM20T-QS30M