CLEIB ORIGINAL RACING MUFFLER 80MM FRONT PIPE SET FOR HONDA CIVIC TYPE R FL5 CLEIB-00002

 

CLEIB ORIGINAL RACING MUFFLER 80MM FRONT PIPE SET FOR HONDA CIVIC TYPE R FL5 CLEIB-00002

Here are the top technical advantages of the CLEiB Original Racing Muffler 80 mm + front pipe set (CLEIB‑00002) for the Honda Civic Type R FL5:

Key Technical Benefits:

1. Large‑bore 80 mm stainless 304 piping

• The significantly increased diameter (from stock ~60 mm to 80 mm) dramatically reduces exhaust back‑pressure, helping the K20C1 make more power and rev more freely at high RPMs  .
• Constructed from SUS 304 stainless steel, it offers superior corrosion resistance and durability over cheaper materials  .

2. Single-muffler layout with front pipe included

• The straight-through, single muffler design simplifies the system and ensures a smooth exhaust flow path.
• The inclusion of a front pipe means full-flow optimization from the downpipe back, eliminating typical choke points between stock front pipes and aftermarket cat-backs.
• On the FK8 equivalent, the setup is praised for combining flow efficiency with aggressive sound.

3. Handmade precision & fitment

• Fabricated in Japan by CLEiB’s founders, the entire system is handcrafted for exact fitment, clean welds, and a high-quality finish.

4. Aggressive, track-focused exhaust tone

• The straight‑through design and large diameter deliver a pronounced sporty sound and induction tone, especially when the valve opens (WOT).
• Users often report a richer, deeper note compared to the flatter, bass-heavy stock system.

5. Lightweight, low back-pressure setup

• Removing restrictive resonators and using single-canister design lowers weight and exhaust restrictions simultaneously, improving throttle response and power delivery.

Performance Takeaways

Power and response

• The larger-bore stainless pipe improves flow, resulting in sharper throttle response and stronger high-RPM performance thanks to reduced back-pressure.

Sound characteristics

• Expect a sport-tuned roar with more bark and pops under gear-shifts and valve modulation. It may sacrifice a degree of mid-range resonance for a sharper tone overall.

Fitment and reliability

• Quality craftsmanship ensures bolt-on installation (keeping factory location for the valve), robust durability, and sleek weld quality.

**The verdict.

1. The CLEiB CLEIB‑00002 is a premium, race-oriented exhaust system tailored for the FL5 Type R. With its 80 mm stainless steel construction, full-flow design and aggressive sound profile, it delivers measurable performance and a standout tone. 

2. Best suited for enthusiasts who prioritize track capability and bold acoustic presence, it’s a flawless upgrade—just be ready for a louder ride and some highway drone.

CLEIB ORIGINAL RACING MUFFLER 80MM FRONT PIPE SET FOR HONDA CIVIC TYPE R FL5 CLEIB-00002

 

2002-2003 Subaru Impreza WRX STI Duraflex GT Concept Fenders - 2 Piece SKU: K2-1134-SBR-114-OFR

Known for bold styling and wide availability, Duraflex parts are ideal for enthusiasts looking to upgrade their car’s appearance without breaking the bank.

Key Features:

• Bold, aggressive styling

• Wide range of fitments

• Nationwide shipping

• Built for body shop prep and install

Ideal For:

• Enthusiasts on a budget looking for aggressive styling

• Projects where bodywork and paint are already planned

• Shops familiar with fiberglass component fitment and finishing

What to Expect:
Duraflex products are made with a proprietary fiberglass-plastic blend that allows for flexibility and ease of shaping during installation. These are not direct bolt-on parts — they are designed for professional prep, paint, and installation to achieve the best possible results.

Materials & Construction:

• Flexible fiberglass composite designed for affordability and easy shaping during installation

• Aggressive styling features that enhance your vehicle’s stance and overall look

• Hand-finished surface that typically requires sanding and bodywork prior to paint

Important Notes:

• Fitment may vary slightly — professional body shop installation is strongly recommended

• Minor imperfections such as waves or uneven edges are normal and part of the prep process

• Parts ship unpainted and require sanding, priming, and painting before final installation

2002-2003 Subaru Impreza WRX STI Duraflex GT Concept Fenders - 2 Piece SKU: K2-1134-SBR-114-OFR

 

2015 - 23 Challenger XRGB LED Headlights

COMPATIBILITY

• Dodge Challenger: 2015-2023 (R/T, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker, R/T Shaker, SRT 392, SRT Hellcat, SXT, SXT Plus)
• DOT Compliance: RGB Multicolor DRL Not street legal
• Replaces Dodge Part #: 68174065AF, 68384440AB, 68304471AB, 68378877AA, 68174067AE, 68174066AF
• Compatibility note: These housings have been designed for, and tested on, US-Spec vehicles. Other countries’ compatibility may vary and is not guaranteed nor always known.

FEATURES & BENEFITS

• The XRGB Multicolor headlight from Morimoto delivers the personalization you seek. The performance you need. And tops it off with some hard-to-resist glitz for the front end of your Challenger.
• Impressively Bright Multicolor Daytime Running Light changes color through the Morimoto app for all iOS or Android users.
• Low beam performance is much brighter and wider than OEM HID headlights!
• Easy to install: It is Completely plug-and-play with a factory multi-pin connection without any additional wiring required!
• Backed: With a no-hassle 5-year warranty, supported by Morimoto Lighting in Atlanta.

WHAT’S INCLUDED

• Headlights: 2x (One Pair) 15-23 Dodge Challenger XRGB (LF495)
• Morimoto XBT Bluetooth App: Free download from App Store
• Warranty: Five (5) Years

COMPLIANCE

Due to the color-changing RGB DRL, these lights are not complaint for on-road use in the USA or Canada.

TECHNICAL SPECIFICATIONS

• Light Output Pattern: LHD Only
• Input Connector: Mopar Multi-Pin OEM
• Functions: DRL (RGB), Turn, Parking, Low, High
• Turn Signal Color: Amber
• Interior Bezel Color: Gloss Black
• Housing Materials: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
• Optical Technology: Kuria Optic Bi-LED
• UV Lens Coating: Momentive UVHC3000
• Bluetooth App: Morimoto XRGB

2015 - 23 Challenger XRGB LED Headlights

 

AC SCHNITZER RACING CARBON REAR WING FOR BMW M3 G80 SEDAN SKU: 5162380210 

Here is a precise and technical advantage review for the AC Schnitzer Racing Carbon Rear Wing for BMW M3 G80 Sedan (SKU: 5162380210):

AC Schnitzer Racing Carbon Rear Wing for BMW G80 M3 – Technical Advantages Review:

1. Aerodynamic Downforce Optimization

Engineered using CFD (Computational Fluid Dynamics), the AC Schnitzer Racing Carbon Rear Wing significantly increases rear axle downforce at high speeds. This added pressure stabilizes the vehicle’s rear end, especially during aggressive cornering, high-speed lane changes, and track use, enhancing both yaw control and chassis balance.

2. Lightweight Pre-Preg Carbon Fiber Construction

Constructed using motorsport-grade pre-preg carbon fiber laminate, the wing delivers superior strength-to-weight ratio. This ensures minimal added mass over the rear decklid, preserving the M3’s dynamic weight distribution and unsprung mass advantage, crucial for optimal handling and acceleration responsiveness.

3. Motorsport-Inspired Adjustable Design

The wing’s angle of attack is adjustable, allowing the user to fine-tune the aerodynamic load depending on driving conditions—whether for high-speed circuits, track days, or spirited road driving. This multi-position adjustability provides tailored aerodynamic efficiency or drag reduction as needed.

4. Torsionally Rigid CNC-Machined Aluminum Brackets

The support struts are made from precision-machined aluminum alloy, ensuring structural rigidity and consistent aerodynamic load transfer to the chassis under high-speed pressure. This prevents deflection or wing flutter, maintaining high-speed stability and safety.

5. OEM Fitment and Functional Design Integration

Developed specifically for the G80 M3 chassis, the wing mounts seamlessly to the OEM trunk without modification. It maintains full compatibility with factory sensors and trunk operation, and integrates aesthetically with BMW’s design while functionally improving rear-end aerodynamic flow.

6. Track-Proven Performance Validation

Wind tunnel and racetrack validated, the AC Schnitzer Racing Rear Wing is engineered under FIA GT-style testing conditions, ensuring real-world high-speed stability, braking confidence, and enhanced cornering grip—crucial for both competitive and enthusiast driving.

AC SCHNITZER RACING CARBON REAR WING FOR BMW M3 G80 SEDAN SKU: 5162380 210 

REVOLUTION INTAKE COMPLETE KIT FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-ICK

 

REVOLUTION INTAKE COMPLETE KIT FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-ICK

Here’s a technically precise and engineering-focused specification of the advantages of the REVOLUTION Intake Complete Kit for Toyota 86 / Subaru BRZ (ZN6 / ZC6) – Part No: RZN6-ICK:

REVOLUTION Intake Complete Kit – Engineering Advantages:

1. Optimized Airflow Efficiency through CFD Design

The REVOLUTION Intake Kit is engineered using Computational Fluid Dynamics (CFD) to ensure laminar airflow with minimal turbulence from the air filter to the throttle body. This reduces boundary layer separation and pressure drop across the intake tract, resulting in maximized volumetric efficiency.

2. Enlarged Inlet Diameter and Smooth Mandrel Bends

The intake piping features increased inner diameter with smooth mandrel bends, minimizing flow restrictions and optimizing intake charge velocity. This enhances cylinder filling especially in the mid-to-high RPM range, directly contributing to increased power output and throttle response.

3. High-Flow Dry Air Filter Element

Equipped with a low-restriction dry-type air filter media, the kit ensures superior filtration efficiency (>98%) while promoting high mass airflow. This allows for extended service intervals without oil contamination of the MAF sensor, ensuring long-term reliability and accurate air metering.

4. Heat Shield Integration and Thermal Management

Incorporates a dedicated aluminum heat shield with high-reflectivity surface treatment, effectively isolating the intake from engine bay radiant heat. Combined with optimized filter placement, the system draws in cooler, denser air, improving combustion efficiency and reducing heat soak under high-load conditions.

5. Increased Intake Resonance Tuning for NA Engine Response

The intake duct length and volume are tuned to enhance Helmholtz resonance, amplifying mid-range torque output particularly between 3,500–5,000 rpm. This tuning characteristic preserves the naturally aspirated throttle sensitivity and dynamic response the FA20 engine is known for.

6. Direct Fitment with OEM Mounting Points

The RZN6-ICK kit is engineered for bolt-on installation using factory mounting locations and sensor ports (e.g., MAF, IAT), maintaining full compatibility with stock ECU calibration and ensuring seamless integration without CEL issues or drivability compromise.

7. Lightweight Construction with Structural Rigidity

Constructed from lightweight, aerospace-grade aluminum and reinforced resin components, the intake system achieves a balance of weight reduction and mechanical durability. This contributes to an overall vehicle weight savings while ensuring vibration resistance and dimensional stability under thermal cycling.

Summary of Engineering Benefits:

• Reduced intake air resistance and improved charge velocity
• Cooler, denser intake air through thermal shielding
• Enhanced midrange torque via intake pulsation tuning
• Maintains precise air metering and sensor calibration
• Lightweight, durable construction tailored for high-RPM NA performance
• Plug-and-play installation with factory harnesses and mounts

REVOLUTION INTAKE COMPLETE KIT FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-ICK