Mishimoto 2017+ Honda Civic Type R Performance Air Intake Kit SKU: MISMMAI-CTR-17

Here are the edge advantages of the Mishimoto 2017+ Honda Civic Type R (FK8) Performance Air Intake Kit – SKU: MISMMAI-CTR-17:

Performance Gains

• Increased horsepower and torque: Dyno-tested to deliver consistent power gains throughout the RPM range (up to +10 whp and +10 wtq depending on mods).
• Optimized airflow: Designed with a larger-diameter intake tube and a less restrictive filter for maximum flow efficiency.

Improved Turbo Response

• Quicker spool time: Reduces lag by allowing the turbocharger to access cooler, denser air more rapidly.
• Enhanced throttle response: Delivers sharper acceleration feel under hard throttle.

Cold Air Induction Design

• Cooler intake temps: Strategically positioned to draw air away from engine heat, reducing intake air temperatures (IATs).
• Sealed airbox design: Shields the filter from underhood heat, maintaining consistent performance even in traffic or hot climates.

High-Quality Construction

• Mandrel-bent aluminum intake tube: Durable, lightweight, and corrosion-resistant with precision fit.
• Oiled or dry washable filter option: Improves long-term filtration performance and can be reused, saving cost.
• Heat-resistant silicone couplers: Provide excellent seal and vibration resistance.

OEM Fitment with Easy Installation

• Direct bolt-on: Requires no cutting or permanent modification to the chassis.
• Comes complete with all hardware: Brackets, clamps, and install instructions included for straightforward install.

Track-Tested & Proven

• Designed with input from racing and performance testing to ensure real-world gains on street and track conditions.
• Reliable even under high-boost or tuned ECU setups

Mishimoto Lifetime Warranty

• Peace of mind: Backed by a no-questions-asked limited lifetime warranty — rare in aftermarket intakes.

Mishimoto 2017+ Honda Civic Type R Performance Air Intake Kit SKU: MISMMAI-CTR-17

SPOON STIFF PLATE FRONT FOR HONDA CIVIC FL5 FL1 L15C K20C 50260-FLA-000

 

SPOON STIFF PLATE FRONT FOR HONDA CIVIC FL5 FL1 L15C K20C 50260-FLA-000

Here are the specific advantages of the SPOON Stiff Plate Front for the Honda Civic FL5 (Type R K20C) and FL1 (L15C Turbo) — Part Number 50260-FLA-000:

1. Improved Front Chassis Rigidity

• Reinforces the front subframe area, reducing flex during hard cornering or aggressive braking.
• Increases overall body rigidity, especially important for high-performance setups like the FL5 Type R.

2. Enhanced Steering Response

• Reduces delay between steering input and vehicle response.
• Improves linearity and precision, especially during mid- to high-speed maneuvers or track driving.

3. Better Suspension Efficiency

• Prevents unwanted movement in suspension geometry by minimizing subframe flex.
• Allows shocks, bushings, and control arms to function more effectively — maximizing the benefit of coilovers or upgraded suspension

4. OEM Fitment & Bolt-On Install

• Directly bolts to factory points without cutting or welding.
• Compatible with both FL5 Type R and FL1 turbo models (L15C / K20C), making it a versatile upgrade.

5. High-Strength Lightweight Material

• Made from rigid yet lightweight materials (aluminum or steel composite, depending on revision).
• Provides reinforcement without adding unnecessary weight.

6. Reduces Front-End Vibration

• Helps reduce minor vibrations and harshness transmitted through the front subframe.
• Ideal for improving road feel in performance driving while keeping comfort on the street

7. Designed & Proven by SPOON SPORTS

• Developed through real-world testing on track and road.
• Trusted by enthusiasts and professional racers alike for balance, control, and reliability.

8. Improves Traction & Front-End Stability

• Particularly beneficial for FWD applications — keeps the front end planted during hard acceleration or tight turns.
• Minimizes understeer and improves overall grip in demanding cornering conditions.

SPOON STIFF PLATE FRONT FOR HONDA CIVIC FL5 FL1 L15C K20C 50260-FLA-000

 

GTS Style Carbon Fiber Front Hood - BMW G20 3 Series

Here are the specific advantages of a GTS Style Carbon Fiber Front Hood for the BMW G20 3 Series:

Performance Advantages

1. Weight Reduction
   
• Carbon fiber construction significantly reduces weight compared to OEM steel or aluminum hoods.
• Enhances acceleration, braking, and handling due to reduced front-end mass (unsprung weight).
2. Improved Heat Extraction
   
• Functional vents in GTS-style design allow better engine bay cooling.
• Helps dissipate heat from the turbo or inline-4/6 engines, especially in tuned or track-driven G20s.
3. Better Aerodynamics
   
• GTS-style vent layout improves under-hood airflow, reducing pressure buildup.
• Can aid in stability at higher speeds by reducing lift.

Fitment & Installation Benefits

4. Direct Bolt-On Design
   
• Typically designed to retain OEM mounting points, latch, and strut support compatibility.
• No need for extensive modification or drilling.
5. Compatible with OEM and Aftermarket Parts
   
• Works with standard headlights, grilles, fenders, and wipers.
• Can be paired with M-Tech or M Performance front bumpers for seamless fitment

Aesthetic & Functional Style

6. Aggressive GTS Appearance
   
• Inspired by the BMW M4 GTS design – muscular, motorsport-inspired look.
• Adds street or track presence without compromising body lines.
7. Exposed Weave Carbon Finish
   
• Offers a premium motorsport look, with UV-protected glossy or matte finish.
• Can be painted partially or left exposed to show carbon weave.

Material & Construction Perks

8. High Tensile Strength
   
• Carbon fiber has excellent strength-to-weight ratio, improving safety and durability.
• Resists flexing, warping, and cracking under heat and load (when properly made).
9. Weather & Corrosion Resistant
   
• Unlike metal hoods, carbon fiber won’t rust.
• With UV coating, it resists fading and discoloration from sun and rain.

Optional Add-Ons or Compatibility

10. Supports Hood Pins or Aero Latches (optional)

• For track use, users can install hood pins for extra safety.
• Many versions come pre-drilled or pre-notched for easy integration.

GTS Style Carbon Fiber Front Hood - BMW G20 3 Series

ZEROFIGHTER 8-POINT ROLL BAR KIT REAR FOR EG6 EG9 EJ1 ZEROF-00634

 

ZEROFIGHTER 8-POINT ROLL BAR KIT REAR FOR EG6 EG9 EJ1 ZEROF-00634

Here are the key advantages of the ZEROFIGHTER 8-Point Roll Bar Kit Rear (ZEROF-00634) for Honda EG6 (Civic SiR), EG9 (Civic Ferio), and EJ1 (Civic Coupe):

1. Enhanced Chassis Rigidity

• Connects multiple structural points (B-pillar, rear shock towers, floor, etc.), greatly reducing chassis flex during hard cornering or braking.
• Improves handling precision, steering response, and overall vehicle balance — especially in high-grip or track setups.

2. Improved Safety

• Adds structural protection behind the driver and passenger area, helping prevent cabin collapse in the event of a rollover (especially when combined with harness bar and bucket seats).
• Provides a foundation for harness mounting if used with 4- or 6-point race harnesses.

3. Lightweight & High-Strength Construction

• Made from high-quality steel tubing, strong yet not excessively heavy — optimized for race or spirited driving.
• Designed with precision welds and a bolt-in fit for compatibility with EG chassis models.

4. True 8-Point Mounting for Maximum Effect

• Anchors to 8 critical points, usually including:
  
• Rear wheel arch or shock tower area
• Rear floor
• B-pillar base
• Lower rear seat/floor junction
• 
  
• Offers a significant upgrade over 4- or 6-point bars in terms of torsional rigidity.

5. Track-Ready, Street-Conscious Design

• Designed with clearance in mind — retains some cabin usability, depending on seat and trim setup.
• Suitable for time attack, circuit, autocross, or touge builds, while being manageable for some street cars (check local regulations).

Perfect For:

• EG chassis track cars, daily-track hybrids, or high-performance street cars
• Builds using coilovers, semi-slick tires, and aggressive suspension setups
• Owners who want the classic JDM track-day look with real function

ZEROFIGHTER 8-POINT ROLL BAR KIT REAR FOR EG6 EG9 EJ1 ZEROF-00634

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC CR-X INTEGRA B16A B16B B18C 14760-B16-000

 

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC CR-X INTEGRA B16A B16B B18C 14760-B16-000

Here are the key advantages of the TODA Racing Up-Rated Valve Springs (Part No. 14760-B16-000) for Honda B16A, B16B, B18C engines (Civic, CR-X, Integra):

1. Supports Higher RPM & Aggressive Cams

• Stronger spring tension prevents valve float at high RPMs, allowing safe operation beyond 9,000 RPM.
• Essential when running high-lift or long-duration camshafts, such as TODA’s VTEC killer or other aggressive profiles.

2. Precision-Matched for Performance

• Engineered to work perfectly with TODA cams and aftermarket valvetrain setups.
• Reduces the risk of valve bounce, misfires, or inconsistent power delivery at high RPM.

3. Increased Reliability in Extreme Conditions

• Constructed from high-tensile strength materials (chrome silicon), resistant to fatigue and thermal stress.
• Ideal for track, time attack, drag, or circuit racing where extended high RPM usage is common.

4. Maintains Accurate Valve Timing

• Keeps valves opening and closing with precision, maintaining engine efficiency and combustion stability.
• Helps preserve powerband when used with ported heads or tuned engines.

5. Drop-in Fit for B-Series Heads

• Direct replacement for OEM valve springs in B16A, B16B, and B18C VTEC heads.
• Compatible with OEM retainers, but TODA titanium retainers are recommended for full effect.

Who Needs This:

• Enthusiasts running high-revving N/A B-series builds
• Tuners using aftermarket camshafts
• Track-day or race-prepped Hondas requiring consistent top-end power

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC CR-X INTEGRA B16A B16B B18C 14760-B16-000

SPOON BONNET VENT CARBON FOR HONDA CIVIC FL5 K20C 74160-FL5-000

 

SPOON BONNET VENT CARBON FOR HONDA CIVIC FL5 K20C 74160-FL5-000

Compatible Car: Honda Civic Fal5

Compatible Engine: K20C

1. This is SPOON SPORTS newly release BONNET VENT CARBON for 11th Civic Type R (FL5). 

2. Civic Type R (FL5) has insufficient cooling performance for sports driving. 

3. SPOON We had improved cooling performance using standard methods such as low-temp thermostats and increasing radiator capacity.

4. However in order to further improve cooling performance, SPOON tried improving the bonnet duct as well.

5. The opening with the louver is widened to the maximum to maximize the opening area. 

6. The front part of the duct is raised to direct the air flowing through the bonnet upwards, creating a structure that pulls heat out of the engine compartment effectively.

7. SPOON also extended the rear part of the duct toward the engine room, creating a shape that allows heat to be dissipated more smoothly. 

8. With the improved cooling performance of the bonnet vent, you can enjoy sports driving with peace of mind. 

9. Made of dry carbon, leaving the genuine rain guard on the back of the hood prevents rainwater from entering the engine compartment. 

10. Removing the rain guard during sports driving will further improve cooling performance. 

Notes & special notes:
**Made of dry carbon 260g (STD 480g)
**Clear painting recommended

SPOON BONNET VENT CARBON FOR HONDA CIVIC FL5 K20C 74160-FL5-000

BLITZ SUCTION KIT RED FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 55101

 

BLITZ SUCTION KIT RED FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 55101

Compatible car: TOYOTA GR86 ZN8 SUBARU BRZ ZD8

Model Year: 2021/08- 
Chassis Model: ZN8 ZD8 
Product Name: SUCTION KIT 
Core Type: RED 

Description: 

1. Designed considering the genuine suction of shape, reduction of internal resistance. 

2. Improve the suction efficiency and improves engine response. 

3. Bolt can be installed in a dedicated design. 

4. Aluminum to body material, by adopting the red or blue silicon in the joint, ensure the durability and safety.

BLITZ SUCTION KIT RED FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 55101