AKRAPOVIC EVOLUTION LINE (TITANIUM) - PORSCHE PANAMERA GTS / SPORT TURISMO (971) 2019 - 2020 SKU: S-PO/TI/9H

1. This stunning system is made completely from high-grade titanium. 

2. It includes parts cast in the company’s in-house foundry, featuring an active X connection and an additional pair of exhaust valves behind the rear mufflers. Designed to provide optimal control of the exhaust sound for the best aural enjoyment. 

3. The system has been perfectly tuned to deliver the very best sound experience in all modes.

4. Enormous effort was invested to give it a sporty, deep higher-frequency V8 sound with an unmistakable Akrapovic character, while keeping it smooth and eliminating any drone for maximum everyday comfort. 

5. By using the optional Akrapovic sound Kit, the driver can choose between a loud racy sound or a quieter note for long-distance driving, regardless of the mode chosen for the vehicle. 

6. The look of the evolution system can also be further enhanced by adding four round titanium or carbon-fibre tailpipes.

7. An increase in performance and torque through a broad rpm range and a significant weight savings of 40% makes this a very serious performance upgrade. 

8. With optimized gas flow and reduced back pressure, it allows limitless tuning options.

9. Because it is ECE type approved with no need to remap the ECU or add any other parts, it is just a simple plug-and-play installation. 

10. The exquisite Akrapovic  Evolution Line (Titanium) exhaust system adds performance and style, along with an amazing soundtrack.

11. With the use of the optional Akrapovic Sound Kit, the ECE type approval is no longer valid.

12. For vehicles with the base (non sport) Porsche exhaust system, which is then replaced by the Akrapovic Evolution Line system, the Middle Valve Actuator Kit (P-HF1170) is a mandatory upgrade.

13. Fitment notice: This system does not fit on vehicles equipped with Otto particulate filter (OPF). This product will not fit on Executive models.

AKRAPOVIC EVOLUTION LINE (TITANIUM) - PORSCHE PANAMERA GTS / SPORT TURISMO (971) 2019 - 2020 SKU: S-PO/TI/9H

https://fdracing.co.uk/?sca_ref=8015017.EDmvvqssoK&sca_source=https://fdracing.co.uk/products/akrapovic-evo-line-ti-porsche-panamera-gts-sport-turismo-971-2019-2020

 

2017 – 24 6th Gen Chevy Camaro ZL1 Elite Carbon Series Cold Air Intake | Cold Air Inductions

1. The Elite Carbon Series is the most heavily developed bolt-on cold air intake system on the market. 

2. With carbon fiber used to create all major parts except the filter, it provides optimum strength to weight ratio, corrosion resistance, and heat dissipation. 

3. This is the most advanced system offered by Cold Air Inductions, every part engineered and tested for maximum performance improvement. 

4. Dyno proven in every aspect, the Elite Carbon Series is built to the highest level of detail and specifications.

•  Improves Engine Efficiency, Boosts Fuel Economy
•  Easy Install – OEM Fit, No Modifications Necessary•
•  Cooler Intake Temperatures Increase Engine Power
•  Clear Viewing Window Allows For Easy Filter Inspection
•  More Responsive Throttle During Acceleration

5. The Cold Air Inductions Elite Carbon Camaro intake system goes beyond mere promises of better performance – it delivers it. 

6. The design of this carbon fiber air box focuses on minimizing weight and maximizing heat resistance. 

7. This provides cooler air intake temperatures to improve engine output. Our thorough dyno and thermal testing prove the capabilities of this system.

8. Elite Carbon Series intakes feature epoxy-coated carbon fiber air tubes for easy airflow. 

9. Stainless steel fittings provide lasting, gasketed seals. Filter access and maintenance checks are a breeze with the clear air box window. 

10. Elite Carbon intakes are perfect for Camaro enthusiasts looking for an improvement in performance and style. Upgrade to this intake for improved airflow, a boost in horsepower, and better MPGs. 

11. You can also expect to see performance levels that exceed expectations set by OEM manufacturers. Order yours today.

12. COLD AIR INTAKE SYSTEM INCLUDES:

• Carbon Fiber Air Box with Clear Inspection Window
• Carbon Fiber Intake Tube
• High Performance Air Filter
• Flex Coupler/Stainless Clamps
• Installation Instructions

THIS SYSTEM FITS:

• 2017 – 2024 Chevrolet Camaro ZL1 6.2L V8

13. NOTES:

• This is a direct replacement for the OEM air box. No modifications required on box itself. Retains the OEM washer bottle in the stock location.
• Not CARB compliant and not legal for sale or use in California or any state with similar emission standards.
• Street legal in all 50 states? – No

14. SKU: 501-5000

2017 – 24 6th Gen Chevy Camaro ZL1 Elite Carbon Series Cold Air Intake | Cold Air Inductions

 

2019 – 24 Charger Waterproof Snorkel Halo Lights

DODGE CHARGER WATERPROOF HALO

Transform the look of your Dodge Charger with the Lighting Trendz Snorkel Halo Kit, engineered specifically for all 2019+ Charger models. 

With full-color customization, you can choose between RGBW for bold single-color options (including pure white) or the Flow Series for vibrant, dynamic color-chasing patterns. 

This sleek addition not only upgrades your vehicle’s aesthetic but ensures maximum brightness and unmatched quality to make your Charger stand out on the road.  

What is a Halo Kit?

A Halo Kit is a kit that comes with all the needed parts for successfully functioning halo lights for your specific car. 

Whether the car has one, two, or three halos on each headlight, the Halo Kits will come with everything you need from the number of halos, halo sizes, to the wiring needed to install on your car for your specific need. 

Key Features

Color Options: Available in RGBW or Flow Series, allowing for endless color combinations and customizable effects with ease.

Easy Installation: Straightforward, plug-and-play setup so you can elevate your vehicle’s style without hassle.

Superior Quality: Built to be brighter and more durable than competitors, delivering a vivid and reliable lighting experience.

Weatherproof Design: Fully waterproof and weather-resistant to handle any driving conditions.

2019 – 24 Charger Waterproof Snorkel Halo Lights

 

AIRLIFT PERFORMANCE | FRONT KIT | BMW 3 SERIES 2005-2014 SKU: 75523

Designed to give your BMW 3-Series the ultimate performance edge, this Airlift Front Performance Kit offers precision handling, a good drop, flexibility and control for daily driving and spirited track days.

These shocks have remote reservoirs in them to provide effective cooling.

While its air springs give you a progressive suspension and ride quality, it improves your handling and clear all obstacles you have.

So, Upgrade now your BMW 3-Series with Bimmer Plug Airlift Front Performance Kit for optimal suspension and performance all the time.

KEY FEATURES & SPECIFICATION

1. A sleek, aggressive look & superior stability with advanced damping
2. Air springs ensure a comfortable ride and long-lasting durability
3. Fine-tune the suspension for personalized comfort and performance
4. Corrosion-resistant components to withstand harsh environments
5. Easy Bolt-On Installation for a hassle-free setup, without modifications
6. A smoother ride without sacrificing handling capabilities

TECHNICAL INFORMATION

•  Drop: 120mm or 4.75-inch
•  Air Springs: Compact double bellows
•  Adjustment: 2-way, 30-level damping adjusters 
•  Body Shocks: Threaded
•  Construction: Monotube, Rear Axle
•  Air Lines: Stainless steel braided
•  Fittings: 1/4-inch PTC fittings
•  Weight: 30lb
•  Width: 14.875-inch
•  Depth: 29-inch
•  Height: 8-inch
• 
  

**Suite for BMW 3 Series 2005-2014 3.0-liter, N54 i6 turbo

AIRLIFT PERFORMANCE | FRONT KIT | BMW 3 SERIES 2005-2014 SKU: 75523

 

LED Taillights - Porsche Cayenne

1. Introducing the Bimmer Plug LED Taillights for the Porsche Cayenne - the ultimate upgrade for your luxury vehicle. 

2. Designed to enhance style and safety, Bimmer Plug taillight is the perfect blend of exquisite craftsmanship and cutting-edge technology. 

3. Illuminate the road behind you with unmatched brilliance and sophistication, showcasing your Porsche Cayenne's true elegance and power.

4. Crafted with meticulous attention to detail, the Bimmer Plug LED Taillights seamlessly integrate into the sleek lines of your Porsche Cayenne, elevating its aesthetic appeal. 

6. The bold and modern design will turn heads wherever you go, leaving a lasting impression on fellow enthusiasts and passersby.

7. Our LED taillights are built to last, with a durable construction that withstands the rigors of daily driving. 

8. They are precision-engineered to fit seamlessly into your Porsche Cayenne, making installation a breeze. 

9. With a plug-and-play design, you can effortlessly upgrade your vehicle's taillights without complex modifications or professional assistance.

LED Taillights - Porsche Cayenne

CAR MAKE T&E [TOYOTA ZN6 86] LEGERFORT FULL TITANIUM MUFFLER LEFT AND RIGHT 2 PIECES (WITH CENTER PIPE SUB-TYCO) 60.5Φ FOR CARMAKETE-02945

 

CAR MAKE T&E [TOYOTA ZN6 86] LEGERFORT FULL TITANIUM MUFFLER LEFT AND RIGHT 2 PIECES (WITH CENTER PIPE SUB-TYCO) 60.5Φ FOR CARMAKETE-02945

This full titanium muffler for Toyota ZN6 86 condensed the quality and know-how unique to T&E, which has a track record of selling titanium mufflers for over 15 years!

By replacing the center pipe, the weight is reduced to 9kg, which is less than half of the original 18.6kg. 

Directing a powerful rear view by putting out left and right and you may also enjoy the dry sound that unique to titanium. 

The left single, which is popular with Subaru cars, has also been completed as a straight pipe that will be a special part for competition vehicles.

Legerfort Full Titan Muffler Left and right muffler with center pipe for TOYOTA ZN6 86/SUBARU ZC6 BRZ comprised of:

・Main 60.5φ or 70Φ (Photo shows 60.5Φ)

・Inside sub-silencer 60.5φ 

・Tail 115φ double oblique 10°C blue coloring 

Comes with vary stamped price:

(1) Légerfort full titanium muffler 2 pieces left and right (with center pipe sub-tyco) List price 258,000 yen (excluding tax) 

(2) Légerfort full titanium muffler 2 pieces left and right (without center pipe sub-tyco) List price 248,000 yen ( (excluding tax)

 (3) Légerfort full titanium muffler left single dashi (without center pipe sub-tying) List price 178,000 yen (excluding tax) 

(4) REAR PIECE only List price 168,000 yen (excluding tax) 

(5) CENTER PIPE only (sub-tying) List price 110,000 yen (excluding tax)

CAR MAKE T&E [TOYOTA ZN6 86] LEGERFORT FULL TITANIUM MUFFLER LEFT AND RIGHT 2 PIECES (WITH CENTER PIPE SUB-TYCO) 60.5Φ FOR CARMAKETE-02945

SPOON ENGINE COMPLETE FOR HONDA CIVIC 6BA-FL5 10TH 11TH GENERATION K20C 10000-FL5-C00

 

SPOON ENGINE COMPLETE FOR HONDA CIVIC 6BA-FL5 10TH 11TH GENERATION K20C 10000-FL5-C00

SPOON ENGINE COMPLETE is assembled using the all new genuine Honda parts.

All edges of the cylinder block and cylinder head are deburred to avoid stress concentration and to prevent metal chips from falling out of the engine during the manufacturing process.

The weight of moving parts such as pistons, piston pins and connecting rods are kept within 0.02g for each cylinder.

The total weight of these moving parts are approximately at 1,100g (K20C), and the difference between cylinders is 0.002%.

Since the allowable weight difference of conventional Honda Type R series engines is 0.2%, SPOON indeed pursuing a precision of 100 times greater than that.

Uniformity of moving parts weight reduces imbalance and vibration with the rpm rises smoothly, giving you a pleasant feeling and great figures in power curves.

Furthermore, an important aspect of engine assembly is clearance management. The engine combines different materials such as aluminum and iron to achieve both strength and light weight.

An aluminum cylinder block is cast with an iron cylinder sleeve and an aluminum piston is incorporated as well.

The crankshaft, camshaft, intake and exhaust valves are also made of iron and are incorporated into the aluminum cylinder block and cylinder head.

Aluminum and iron have different thermal expansion coefficients, so their clearances change as the temperature changes.

For this reason, the clean room where engines are assembled is in air-conditioned to maintain a constant temperature throughout the year, enabling precise clearance control during assembly.

Experience the true nature of Honda engines, where highly precise parts are assembled by skilled mechanics in a properly controlled environment.

SPOON ENGINE COMPLETE FOR HONDA CIVIC 6BA-FL5 10TH 11TH GENERATION K20C 10000-FL5-C00

HKS SUPER TURBO MUFFLER EXHAUST FOR SUBARU WRX S4 VAG FA20 TURBO 31029-AF013

 

HKS SUPER TURBO MUFFLER EXHAUST FOR SUBARU WRX S4 VAG FA20 TURBO 31029-AF013

In overall, the FA20 Turbo engine is a robust and well-rounded option for small performance-oriented vehicles. 

It combines efficiency with performance and when tuned properly, it offers excellent potential for driving enthusiasts who are seeking a balance of power, handling, and everyday usability.

Improving the muffler system with HKS may improve sound characteristics to be more refined and resolute.

Muffler Style: Super Turbo Muffler
Style: Ti-1 (Titan)
Material: S3
Tip O.D.: 90-2 L&R
Pipe Size: 75-60-54
Consist of: 4

Close Sound Level Stock: 74
Close Sound Level HKS: 81

Idling Sound Level Stock: 55
Idling Sound Level HKS: 62

HKS SUPER TURBO MUFFLER EXHAUST FOR SUBARU WRX S4 VAG FA20 TURBO 31029-AF013

J'S RACING SPORT STEERING FK7 CARBON LEATHER FOR HONDA CIVIC FK7 SSG-K7-CL

 

J'S RACING SPORT STEERING FK7 CARBON LEATHER FOR HONDA CIVIC FK7 SSG-K7-CL

Material: High-quality genuine leather 
-Genuine airbags and steer switches can be used 
-Lightweight and highly rigid 
-Easy-to-grip grip shape 

** It is a genuine shape sports steering that is particular about sportiness and comfort, such as adopting the same D shape as FK8.

The upper and lower parts of the steering are made of twill carbon finish to reduce weight and create a sporty looks.

The material of the grip part comes from a high-quality leather made in Italy, carefully selected leather to note.

Accented with red stitching, it boasts the same high quality as genuine leather steering. With an exceptional grip shape, fatigue is also reduced that support sports driving. 

A genuine airbag unit and steering switch can be transplanted as they are and the steering does not impair comfort. 

**Carbon [Steering upper / lower part] 
**Leather [Grip black part / red part] 
**Leather part and carbon part adopt new materials and these materials are processed by hand by renowned craftsmen.

J'S RACING SPORT STEERING FK7 CARBON LEATHER FOR HONDA CIVIC FK7 SSG-K7-CL

 

PSM Style Carbon Fiber Rear Diffuser - BMW F80 M3 & F82/F83 M4

The F80 M3 & F82/F83 are a well-balanced combination of power and aerodynamics, making it a standout in the high-performance sports sedan category.

It was wise to upgrade the rear end of your BMW F80 M3 or F82/F83 M4 with the PSM Style Carbon Fiber Rear Diffuser, designed to deliver both aggressive styling and enhanced performance.

Crafted from premium carbon fiber, this diffuser adds a bold, race-inspired aesthetic while improving aerodynamic efficiency and downforce. 

Transform your BMW with this premium upgrade that perfectly balances form and function.

 

PSM Style Carbon Fiber Rear Diffuser - BMW F80 M3 & F82/F83 M4

 

2014 – 19 C7 Corvette Premium Custom Leather Seat Covers

Elevate the aesthetic of your Corvette C7 with Kustom Interior™’s sophisticated leather seat covers. 

Crafted meticulously using premium artificial leather, seat covers are available in an array of colors, primed to harmonize with your car’s interior upholstery or its striking exterior finish. 

With our unequivocal fit guarantee, enjoy the confidence that these seat covers will seamlessly integrate with your Corvette C7’s seats. 

Beyond the allure, their water-resistant surface stands as a robust shield for your original leather seats, all while amplifying your seating comfort. 

Embrace the blend of luxury and functionality with Kustom Interior™’s superior seat covers.

Features:

1. Simplified Installation: A straightforward slide-on mechanism negates the need for removal of existing covers. Kustom Interior detailed instructional videos provide additional guidance.
2. Precision Engineered for C7: Designed exclusively for the Corvette C7 models, ensuring compatibility with integrated seat heaters, ventilation systems, and guaranteeing unhindered airbag deployment
3. Upholstery Kit Excellence: Embrace the opulence of genuine leather aesthetics paired with the durability of our elite faux leather. A worthy addition to your car’s interior.
4. Safety Commitment: Our upholstery kit has been innovatively designed with side seams that guarantee smooth airbag deployment in emergent situations.

2014 – 19 C7 Corvette Premium Custom Leather Seat Covers

 

GTR Style ABS & Carbon Fiber Front Bumper - Mercedes Benz AMG GT, GTS & GTC

FEATURES

1. Race-Inspired Design: Channel the spirit of the racetrack with our GTR Style front bumper, meticulously sculpted to enhance aerodynamics and exude an aura of unbridled power on the streets.
2. Premium Materials: Crafted with a blend of high-quality ABS and carbon fiber, our front bumper embodies both durability and lightweight agility, ensuring superior performance without compromise.
3. Precision Fitment: Engineered to seamlessly integrate with your Mercedes Benz GT, GTS & GTC AMG, the Bimmer Plug front bumper delivers a flawless fitment that enhances the vehicle's aesthetic appeal while retaining its original charm.
4. Enhanced Performance: Elevate your driving experience with improved airflow dynamics and reduced drag, courtesy of Bimmer Plug GTR Style front bumper. Unleash the full potential of your Mercedes Benz AMG and conquer the road with unrivalled confidence.

GTR Style ABS & Carbon Fiber Front Bumper - Mercedes Benz AMG GT, GTS & GTC

 

CUSCO LSD 1WAY R35 GTR FRONT SPEC1 NISSAN GTR SKU: KLNF01

TYPE-RS Limited Slip Differential

1. In the RS Model, the activation pressure is applied in the same direction as the initial torque with the utilization of a coil spring. 

2. Therefore, the initial torque is set lower than the MZ model enabling a smoother and quicker initial clutch plate engagement from a non-operational to a fully functioning state even despite a low initial torque rating is set. 

3. The virtue of a low initial torque setting is that it enables a smooth turn even while the LSD mechanism is not activated. Because of the coil spring design, it provides an overall gentle and stable operation.

4. The RS Springs sit inside the pressure rings which helps engage the rear lock and the number of springs can be added or subtracted for personal customization.

5. These RS Springs apply constant pressure against the clutch plates at all times, resulting in minimal loss of initial torque over time.

• 1 way LSD
Especially suited for front-wheel drive cars and AWD car front axles. Activates under acceleration, and acts as a true LSD when the throttle is off.

6. All Cusco limited slip differentials have the option of adjusting the responsiveness and the locking characteristics of the LSD by the combination of each plate and its designation of how it is stacked. 

7. Cusco’s exclusive clutch plate grooves are cut radially enabling instant oil movement, thus improving efficiency and durability. 

8. The pressure ring contact surface is polished for an even and flat contact with the clutch plates. 

9. The exclusive Cusco Oil Through System enhances great oil circulation and supply to the necessary areas when used with the Cusco LSD Oil.

CUSCO LSD 1WAY R35 GTR FRONT SPEC1 NISSAN GTR SKU: KLNF01