Corsa 12-14 BMW 335i Sedan RWD F30 3in Polished Touring Dual Rear Single 3.5in Tip Cat-Back Exhaust cor14937

Compatible Vehicle:

• 2012-2018 BMW 335i F30, Sedan, Rear Wheel Drive

Features:

• 3.0 Inch Cat-Back Exhaust System
• Dual Rear Exit with Sport Sound Level
• Single 3.5 Inch Polished Tips
• Patented No Drone, Reflective Sound Cancellation (RSC) Technology
• Custom Tuned, Aggressive Exhaust Note
• No Drone At Cruise
• 304 Stainless Steel Construction
• Flows Better Than Stock
• Dual Walled, Polished Stainless Steel Tips
• Lighter Than Stock
• Easy Bolt-On Installation
• Detailed Printed Instructions Included
• No Welding Required
• Limited Lifetime Warranty
• Made in the U.S.A.
• Sold As A Kit

Corsa 12-14 BMW 335i Sedan RWD F30 3in Polished Touring Dual Rear Single 3.5in Tip Cat-Back Exhaust cor14937

 

Carbon Creations ZR1 Look Hood for Chevrolet Corvette 2014-2019 EXD115300

2014-2019 Chevrolet Corvette C7 Carbon Creations ZR1 Look Hood -1 Piece

Note: Hood pins are required.

**Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

**Some modification/adjustment/final fit must be performed for proper fitment. 

**No returns or refunds.

Carbon Creations ZR1 Look Hood for Chevrolet Corvette 2014-2019 EXD115300

 

Funk Motorsports Honda Civic Type R FK8 Turbo Blanket Titanium Weave FUNK-TBTFK8-TI

**Reduce temperature up to 90% and available both titanium and carbon fiber.

**From a reliability standpoint, the benefits of a turbo blanket are endless.

**Funk Motorsports fireproof ultra-high temperature Stainless Steel thread (1mm in diameter) is highly durable with temperatures in excess of 1300°C.

1. Funk Motorsport was known for industry leading turbo blankets manufacturer.

2. Turbo blanket from Funk Motorsports will improve performance, protection and reliability for your Honda Civic Type R FK8.

3. Funk Motorsport turbo jacket for Honda Civic FK8 functions to; insulate the hot side of the turbo and retain the heat within the exhaust gases themselves.

4. Hotter gases accelerate faster leading to them leaving the system sooner improving spool up and throttle response. 

5. Insulating the hot side of your turbo also helps to lower the amount of heat from the turbo that dissipates into the engine bay and intake pipework. 

6. A cooler intake results in higher performance and more consistent power figures over time.

7. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. 

8. Reducing the overall temperature of the engine bay will improve the reliability of electronics and also help improve the temperature of coolant, fuel and oil lines. 

9. Specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. 

10. The new thicker internal heat lagging insulation to provide up to 3x improved heat reduction. 

11. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities.

– 4-layer construction for improved reliability.

– Uprated external Carbon Fibre twill and Titanium twill for an improved aesthetic and more durable finish.

– ROHS tested and approved to ensure compliance and desired parameters are reached within our material selection.

Note of caution:

**This turbo blanket is not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. 

**Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. 

**Funk Motorsports take no responsibility for fluid contamination our products.

Funk Motorsports Honda Civic Type R FK8 Turbo Blanket Titanium Weave FUNK-TBTFK8-TI

 

ACT XT Clutch Kit [Nissan Silvia(1989-1998)] ACTNS1-XTG4

**The lightweight, rigid design allows for quicker shifts and smooth, trouble-free service.

1. This is ACT Xtreme pressure plate for the most Nissan Silvia demanding driver. 

2. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. 

3. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. 

4. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad rigid race discs are made with high quality, ceramic friction materials. 

5. The chrome-moly hub is heat-treated for strength and durability. 

ACT XT Clutch Kit [Nissan Silvia(1989-1998)] ACTNS1-XTG4

 

HPS Performance Silicone Post MAF Dual Air Intake Tubes Kit Black 5.0L V8 for BMW 98-03 M5 E39 57-1291-BLK

No modification is required. Fits BMW 98-03 M5 E39 5.0 V8.

1. This is BMW 98-03 M5 E39 HPS Black 4-Ply Reinforced High Temp Silicone Air Intake Hose Post MAF Tube 

2. It replaces the M5 E39 stock OEM restrictive hose with high temp reinforced silicon material. 

3. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. 

4. Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains. 

5. This silicone intake hose does NOT trigger check engine light. Installation time is approx. 45 minutes. 

HPS Performance Silicone Post MAF Dual Air Intake Tubes Kit Black 5.0L V8 for BMW 98-03 M5 E39 57-1291-BLK

 

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit - Scion FR-S (BRZ, FT86) 12+ wil140-12870

The unsurpassed braking capacity of the Forged Narrow Superlite 6R six-piston caliper serves as the base of this group of 12.88" rotor kits for these popular Scion FR-S, BRz and GT86.

FNSL6R kits are an engineered application specific for simplified installation, full compatibility with OE master cylinder output and ABS functions where used. 

Big brake kits provide increased brake capacity and complimentary style with wheel, tire and suspension upgrades on show cars and high performance street/ track / drift cars. 

Optional caliper finishes and rotor designs simplify personalize style and braking requirements of any application.

 Available in:

- Black or Red Calipers

- Slotted or Cross Drilled and Slotted

Note: 13 inch front and rear kits were tested on the OEM 17 inch wheel, but always advise to confirm with the wheel clearance diagram in the assembly instructions. 

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit - Scion FR-S (BRZ, FT86) 12+ wil140-12870

 

HKS TYPE-S Body Kit Spoiler Set for Subaru BRZ ZD8 '22+ hks53004-AF003

Application: 2022 Subaru BRZ

The full kit includes the Type-S front splitter, the Type-S side skirt, and the Type-S rear diffuser to give the BRZ an aggressive and aerodynamic character.

The front splitter features CFRP barge panels on both sides and an underbody panel to add downforce and enhance high-speed stability. 

The design of the side skirt matches the front and rear downforce levels to improve underbody airflow, reduce lift, and minimize drag-inducing truculence. 

The CFRP barge panel creates an appearance reminiscent of legendary HKS racing cars. 

Finally, the rear diffuser kit features a unique fin-shaped rear spoiler that rectifies the airflow around the rear to optimize the aerodynamic balance of downforce with the front splitter.

Features:

• FRP (Will need painting if desired)
• 3D CAD modeled
• Higher stability at high speeds
• Adds a great motorsport-inspired look

HKS TYPE-S Body Kit Spoiler Set for Subaru BRZ ZD8 '22+ hks53004-AF003

 

Anderson Composites DOUBLE SIDED HOOD FORD SHELBY GT350 TYPE-GT5 2015-2020 AC-HD15FDMU350-GT5-DS

Anderson Composites 2015 - 2020 MUSTANG SHELBY GT350 TYPE-GT5 DOUBLE SIDED CARBON FIBER HOOD

*Fits Shelby GT350 and GT350R only

*Carbon fiber "skeleton" bonded to underside of carbon fiber hood - reduced weight

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Included GT500 style hood vent, improved heat extraction for GT350

*Vent area measures approximately 24"x26"

*Included removable fiberglass rain tray

*Hood mounts with OE hardware

*All hoods require hood pins for safety reasons. 

Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch 

*Heat shield required 

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*The use of a hood prop rod is highly recommended

*Hoods are hand crafted and weigh approximately 26 lbs. (stock hood weighs 31 lbs.)

*Shipped via ground truck freight only

Anderson Composites DOUBLE SIDED HOOD FORD SHELBY GT350 TYPE-GT5 2015-2020 AC-HD15FDMU350-GT5-DS

 

HKS Camshafts Intake & Exhaust for Scion FR-S & Subaru BRZ FA20 hks22002-AT006

HKS Camshaft for FA20 compatible with Applied E Model.  

With HKS Capacity Upgrade Kit, smooth torque increase is expected.

SPECIFICATIONS

• The camshaft design software developed for the locker arm enabled to design high speed valve that is hardly made by other manufacturers. 
• To realize the design by this software, grinding by custom-made small-diameter grindstone was performed to create highly accurate concave camshaft.
• To avoid a power loss by a direct ignition fuel pump, small cam lobe design was adopted from the Applied E model.
• The lift was increased to the limit of the valve spring while considering surging.
• The designated valve timing is equivalent to the stock since the variable valve timing unit's operation angle still has some spare angle.
• Due to the valve opening/closing speed increase and duration enlargement, using the camshaft variable angle maximally may cause insufficient VP (clearance between the valve and piston) resulting in unnecessary contact of the valve and piston. 
• To avoid this unnecessary contact, use HKS Capacity Upgrade Kit which piston recess shape matches 

**PRECAUTIONS FOR USE

• This product must be used with HKS Capacity Upgrade Kit (P/N 21004-AT002 or 21004-AT003) to maintain sufficient VP.
• Setting for fuel, ignition, and valve timing must be performed using Flash Editor and/or F-CON V Pro, or similar devices.
• Refer to the factory service manual

HKS Camshafts Intake & Exhaust for Scion FR-S & Subaru BRZ FA20 hks22002-AT006

 

Injen 05-07 VW MKV Jetta/Rabbit 2.5L-5cyl Polished Cold Air Intake SP3026P

1. It is Injen's patent-pending MR Technology process for optimal gains and for safe air/ fuel ratio. 

2. The MR Technology process has its effects on both types either Speed Pro Series or Short Ram Systems.

3. The Speed Pro Series are the world's first bolt-on tuned intake systems designed specifically for your vehicle. 

4. The aluminum tubes are got variety of finishes with the blue synthetic filters will prevent particles from contaminating the engine.

Injen 05-07 VW MKV Jetta/Rabbit 2.5L-5cyl Polished Cold Air Intake SP3026P

 

Eventuri Toyota A90 Supra Black Carbon Headlamp Duct eveEVE-A90-CF-HDP

1. The MKV A90 Supra had seriously becomes popular as a true blood track car with special requirement for cold air feed; to give you an extra edge. 

2. This headlamp duct replaces the OEM headlamp. It gives a true RAM-AIR configuration with a direct cold air feed to the intake or stand-alone turbo. 

3. The Eventuri Toyota A90 Supra headlamp duct gives the most direct cold air feed possible to reduce heat soak that lead to sustain track times consistency.

4. The duct has the same lines as the stock headlamp with two carbon air guides: to feed the OEM air feed and to feed the entire airbox area. 

5. When cold air being forced into the engine bay, heat soak will be reduced allowing for multiple drag runs. 

6. Crafted from prepreg carbon fiber, the duct has high structural strength and rigidity. 

7. Secured with laser cut stainless steel brackets on the OEM mounting points, it will stay in position even at high speeds. 

8. Every possible advantage will be counted for. This extra headlamp duct is truly extraordinaire for speed enthusiasts.

Eventuri Toyota A90 Supra Black Carbon Headlamp Duct eveEVE-A90-CF-HDP

 

Anderson Composites HOOD CHEVROLET CAMARO 3 INCH COWL 2010-2015AC-HD1011CHCAM-CP-GF

1. This is Anderson Composites 2010 - 2015 CAMARO TYPE-COPO FIBERGLASS COWL HOOD

2. Featuring a Type-CP (COPO style) fiberglass hood with 3 inch cowl for 2010-2015 Chevrolet Camaro

*Also fits 2014-2015 (hood has 2010-2013 body line in center of hood)

*Mounts with OE hardware, hinges and latch 

*Does not have a provision for the OE windshield washer nozzles and hose.

*Fiberglass hood (A side) bonded to fiberglass "skeleton" (B side)

*Do not push hard on surface when sanding. Do not bake with paint curing lamp, allow to cure with ambient air temperature.  

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins- AeroCatch or Quic-Latch 

*Heat shield required 

*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.

*Anderson Composites does not suggest re-installing gas shocks/ dampers/ struts

*The use of a hood prop rod is highly recommended

* Hand crafted; approximate weight 25.4 lbs.

Anderson Composites HOOD CHEVROLET CAMARO 3 INCH COWL 2010-2015AC-HD1011CHCAM-CP-GF

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

 

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

Compatible Car: Nissan Silvia S15

Compatible Engine: SR20DET 

Model year: - 

Clutch cover type: Aluminum cover type Number of discs: Twin disc type 

Disc diameter size: 215mm 

Other indications: Disc type with damper Reinforced twin plate of metal disc. 

**This is a perfect clutch for hard users who are active in a variety of races such as time attack, gymkhana and dirt trials.

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

 

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

Compatible Engine: 177

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: 205 
Displacement: 4.0 LITER 
Grade / Specifications: C63 AMG TWIN TURBO

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower and stabilize the intake air temperature. 

Achieves torque and power-up in the entire range from low to high revs. 

You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L

 

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG  DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L 

Compatible Vehicles: 
MERCEDES BENZ 

TYPE: Drilled & Slit 
Outer diameter: 360.0 
Thickness: 36.0 
inner bore: 215.6 
outer bore : 169.0 
flange thickness: 7.0 
offset: 0.0 
outer disk thickness: 10.0 
inner disk thickness: 10.0 
air gap: 16.0 
PCD: 196.0 
number of holes: 10 
hole diameter: 9.0 

DIXCEL bolt / nut part number and quantity (per sheet): 
bolt: BT-BB-702 × 10 

nut: NT-BB-305 × 10 

DIXCEL bobbin / spring part number and quantity (per sheet): set no 
2- piece rotor (assembly / outer rotor) 

1. In every harsh racing field, this disc rotor from DIXCEL demonstrated the wonders of the performance.

2. The bell housing and the rotor:

By configuring in separate parts, prevent judder due to thermal collapse and distortion of the rotor, reduce the heat damage to the hub. 

It also effective in reducing unsprung weight. 

3. Because it is possible to replace the rotor part of consumable parts only (outer rotor), it is now possible to reduce the total cost. 

4. Since this is pure exchange type, it does not require additional processing attachment. Caliper also can be used as is the genuine caliper.

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG  DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L