BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

 

BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

Compatible car: VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~

※This product is a type that replaces the genuine product.

1. Experience the world's top level Brembo quality while pursuing cost performance for your Volkswagen Golf VII.

2. Brembo brake discs eliminate uneven weight distribution of ventilated discs with an electronic balancer system. 

3. Anti-corrosion treatment has been applied, which has improved not only the appearance but also the product life and braking effect and has made it possible to maintain performance for a long time. 

4. This is a replacement brake disc that was developed from a high-performance vehicle  to be compatible with a wide range of vehicle models. 

5. BREMBO pursue cost performance by producing in own factory, designing parts using BREMBO know-how, develop and produce using cutting-edge technology. 

6. This brake disc is very close to the feel of the original and achieves high performance as demanded. 

7. Brembo is a top brand in brake systems for high-end vehicles such as race cars and luxury cars. 

8.The technical capabilities of the brake system which is recognized worldwide have achieved a performance level that is incomparable to other companies. 

9. It is used in races around the world, including F1 and is also used as an original part by Japanese car manufacturers, 
providing not only product performance but also peace of mind and reliability. 

▼Product name
brembo Brembo Extra Brake Disc
▼Model number
09.C306.1X
▼F/R
Front
▼Automobile manufacturer
VOLKSWAGEN
▼Vehicle model
GOLF VII
▼Model number
AUCJXF AUDJHF
▼Year
13/09~
▼Remarks
【Note 5】《Grade》2.0 R
▼Notes
【Note 5】If EPB is installed, a special computer is required to replace the rear rotor
▼JAN code
4580439055865

BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

 

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

Compatible Engine: 50 8S (S62)

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: E39 
Displacement: 5.0 LITER 
Grade / Specifications: M5

1. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Achieves torque and power-up in the entire range from low to high revs. 

4. You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

 

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

1. This is an intake pipe plain weave carbon clear gel coat finish, unpainted product from Garage Vary for Toyota 86 ZN6 Zenki.

2. The chamber effect improves the torque when stepping on or re-stepping on the accelerator. 

3. The difference at the time of power check from the genuine suction is 3.6 ps at the maximum output 

4. About 8 ps at around 4,000 rpm where the difference is the widest.

5. Average from 3,000 to 7,000 rpm. Approximately 2.5 ps improvement 

6. Accessories:
-Silicon joint 60 mm x 1 
-Silicon joint 50 mm x 1 
-Rubber cap 1 piece 
-Rubber bush x 1 piece 
-Hose clamp x 4

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

 

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

Compatible Car: BMW E60 Sedan M5

Grade and Year Model: 04/11~ NB50

Material: Super graphite metallic

Applicable Rotor Temperature: 100-800C

Friction Coefficient: 0.39-0.48u

This model offers linear braking commensurate with pedal pressure and stable control in even the most extreme circuit driving conditions.

The Project Mu Racing Racing-N+ Front Brake Pads are a high-performance upgrade designed for the BMW E60 Sedan M5 (Z327). 

These pads cater specifically to enthusiasts and professionals looking for exceptional braking performance under demanding conditions, such as track or racing applications.

Features:

• High Friction Coefficient: Engineered for optimal stopping power and fade resistance, even under high temperatures.

• Durability: Designed to handle extreme use while maintaining consistent performance and wear characteristics.

• Sensor Compatibility: The pads come without a built-in wear sensor, making them ideal for track-focused builds where sensor feedback is unnecessary.

• Racing Compound: Tailored to provide consistent pedal feel and confidence-inspiring braking at high speeds.

Benefits:

• Improved Braking Performance: Ideal for high-performance applications where factory pads may fall short.

• Track-Ready Design: Ensures fade-free performance for extended sessions.

• Reduced Maintenance: Durable compound reduces the frequency of pad changes during heavy use.

   If you plan to install these pads on your BMW E60 M5, ensure your braking system is inspected for compatibility, especially if you’re upgrading other components like rotors or calipers. 

  Pairing them with a high-quality brake fluid is also recommended for optimal results.

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

 

Seibon Mercedes C-Class Gt Hood 2012 - 2014 HD1112MBW204-GT

1. Seibon Mercedes C-Class GT Hood carbon components are carefully hand-crafted using only the finest materials.

2. Seibon production team delivered superior craftsmanship with over 15 years of experience working with carbon fiber. 

3. Every component is constructed with a consistent weave pattern with great quality.

4. Seibon production processes allow exceptional carbon/ resin ratio, creating high product stiffness that also leads to extra strength. 

5. For a stunning finish, Seibon products are coated with a glossy clear coat that does not chip or flake. 

6. The genuine Seibon Carbon products uphold strict quality control for the best quality.

7. Seibon had created a performance-oriented products that help shed unnecessary weight without sacrificing style.

8. Seibon Carbon products proved to be the preferred brand among professional drivers.

Seibon Mercedes C-Class Gt Hood 2012 - 2014 HD1112MBW204-GT

 

Scotidi Dual Billit Calipers Brackets for Ford Mustang '05-'14 GT500 Brakes 004-008-0107

• This is a great opportunity to upgrade to big 13.8" GT500 rear rotors AND get a second caliper mount for a handbrake. Use factory calipers.

• Completely replaces the stock caliper bracket

• Mounts for 2 stock GT/Base S197 rear calipers

• Use for a handbrake or staging brake setup

• Legal only for use in competition vehicles which may never be registered, licensed, and/ or used on public streets or highways; and also for use in other exempted vehicles.

Scotidi Dual Billit Calipers Brackets for Ford Mustang '05-'14 GT500 Brakes 004-008-0107

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

 

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

Compatible Car: HONDA CIVIC FK8 FL5

Compatible Engine: K20C 

Compatible Models: DBA-FK8, 6BA-FK8, 6BA-FL5

**Throttle inlet diameter 65.0mm (STD 62.5mm). Area ratio increased by 8.2%

**Butterfly diameter 62.0mm (STD 60.0mm). Area ratio increased by 6.8%

1. Honda had increasingly tuned turbo engines in recent years with the advancement of powertrains, considering a turbo engine to be an NA engine with extremely high intake efficiency. 

2. It is crucial to guide as much air as possible into the combustion chamber with less resistance to efficiently improve output. This product was born from SPOON idea that "it is indeed a unique element." 

3. This throttle body has an enlarged butterfly diameter which increases the flow path area. It will increase the amount of intake air that lead to improve the output significantly.

4. By improving the surface roughness inside the body and lowering the flow path resistance, the flow velocity of intake air increases and response is improved. 

5. The intake layout of Honda cars is very good even with turbo engines. To make the most of its performance based on a normal throttle body, no modification to the car body is required. 

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

 

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

Compatible Car: 

HONDA CIVIC EG6 EK4 EK9

Compatible Models: 

EG6, EK4 Zenki, EK4 Kouki, EK9 Zenki, EK9 Kouki

1. This is a street type muffler from SPOON with an elegant sound quality that emphasis on torque characteristics. 

2. The flow rate and the flow rate amount are secured sufficiently to maintain adequate pressure and volume in the system

3. Genuine with the same reference flange, combination with mass production intermediate pipe is also possible. 

Main pipe diameter: 60

Outlet diameter: 75

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

 

SPL Front Swaybar Endlinks for Toyota Supra A90 GR BMW Z4 G29 SPL FE G29

Application:
2020+ Toyota Supra A90 GR
2019+ BMW Z4 G29

1. The SPL Parts PRO Front Endlinks (FE) for the 2020+ Toyota Supra and 2019+ BMW Z4 chassis feature massive Teflon lined FK 1/2" bearings. This is to give the highest load capacity for use with stiffer aftermarket sway bars.  

2. Custom heat treated Chromoly High Misalignment Studs connect to the sway bar and offer extreme articulation capability (65deg). This is to prevent the endlink from binding when used with different adjustment holes on aftermarket sway bars. 

3. The SPL Endlinks are length adjustable to eliminate preload on the sway bars, which can result from uneven settling of springs or uneven suspension heights from corner weighting.  

4. Black Anodized 6061-T6 Aluminum Turnbuckles work in conjunction with the left and right hand threaded rod ends for simple and precise adjustment.  

5. These endlinks indeed are perfect for street or race applications.    

6. Made in the USA.

***Please note that:

**If you have changed your OEM shocks with aftermarket shocks or coilovers, the mounting location may have moved. 

**Please check the distance between the swaybar and the shock mount, and confirm that it is still OEM Length. 

**If it does not fall within this range, please call or email SPL with the distance required to find you the proper part. SPL cannot confirm fitment with aftermarket shocks and coilovers. Sold as a pair.

BEFORE PURCHASING:

If you have aftermarket coilovers - 

**Many aftermarket coilover manufacturers change the mounting location from the OEM location for the upper mount on the swaybar. 

**If you are unsure whether or not this location has changed, please measure the length that you think you need, within half an inch and call or email SPL before purchasing to ensure that you get the right part for your application.

SPL Front Swaybar Endlinks for Toyota Supra A90 GR BMW Z4 G29 SPL FE G29

 

aFe Billet Aluminum Power Pulley for BMW M5 (E60) 06-10 V10-5.0L S85 afe79-10003

1. The aFe Power's new power pulley brings better performance engineering for your BMW M5 E60.

2. In recent Dyno testing this power pulley produced 5 HP and 6lbs. x ft. torque.

3. This power pulley does not modify factory harmonics or dampening. 

4. This power pulley is a complete bolt-on kit, including the pulley, bolts, and belts.

5. The aFe's power pulleys are CNC machined out of billet aluminum and black anodized for that aggressive look under the BMW E60 M5's hood. 

6. The aFe Power is the best choice engineering for power, performance, protection and value.

aFe Billet Aluminum Power Pulley for BMW M5 (E60) 06-10 V10-5.0L S85 afe79-10003

MUGEN CIVIC TYPE R STYLING SET FLAME RED FOR HONDA CIVIC TYPE R FK8 61000-XNCF-K0S0-FR

 

MUGEN CIVIC TYPE R STYLING SET FLAME RED FOR HONDA CIVIC TYPE R FK8 61000-XNCF-K0S0-FR

Compatible Car: HONDA CIVIC TYPE R FK8 

Styling Set:

- Front Under Spoiler / Side Garnish / Rear Under Spoiler 3-Piece Set

Remark:

-*For DBA-FK8 only*

Reference man-hour: 2.4h

MUGEN CIVIC TYPE R STYLING SET FLAME RED FOR HONDA CIVIC TYPE R FK8 61000-XNCF-K0S0-FR

SPOON DAMPER KIT [FIX TYPE] FOR HONDA CIVIC INTEGRA EG6 DC2 DB8 51600-DCR-000

 

SPOON DAMPER KIT [FIX TYPE] FOR HONDA CIVIC INTEGRA EG6 DC2 DB8 51600-DCR-000

Compatible Car: HONDA CIVIC INTEGRA EG6 DC2 DB8

1. If your main use is for daily use, you don't need a height adjustment damper. 

2. However, experience and skill are required to create the best condition even if there are functions such as vehicle height adjustment and damping adjustment. 

3. The FIX damper is set for more sports based on the normal maneuver. 

4. By combining with progressive spring, it is possible to drive on a circuit using high grip radial tires. Can also combine with normal springs.

Remark:

EG6, DC2 type R'96Spec, DC2 type R'98Spec, DB8 type R'96Spec, DB8 type R'98Spec

SPOON DAMPER KIT [FIX TYPE] FOR HONDA CIVIC INTEGRA EG6 DC2 DB8 51600-DCR-000

OSGIKEN STREET MASTER SINGLE CLUTCH KIT HARD FLYWHEEL FOR HONDA CIVIC EK9 B16B GT1CD-EK9-FLYWHEEL

 

OSGIKEN STREET MASTER SINGLE CLUTCH KIT HARD FLYWHEEL FOR HONDA CIVIC EK9 B16B GT1CD-EK9-FLYWHEEL

Year: 97/08-00/09 

TYPE: Street Master Hard Drive 

Number of discs: Single disc type 

Disc diameter size: 215mm 

Other indications: Disc type with damper 

Demonstrates strong transmission ability during sports driving, but during general driving, achieves the same operability as standard.

OSGIKEN STREET MASTER SINGLE CLUTCH KIT HARD FLYWHEEL FOR HONDA CIVIC EK9 B16B GT1CD-EK9-FLYWHEEL

BLITZ SIDE STEP FOR SUBARU BRZ ZC6 FA20 60154

 

BLITZ SIDE STEP FOR SUBARU BRZ ZC6 FA20 60154

Compatible Engine: FA20

Model Year: 12 / 03- 
Chassis Model: ZC6 
Product Name: Side Step 

Material: FRP 
painted color: UNPAINTED 
genuine color number: - 

Description: 

The side step optimum match to the AERO SPEED R-Concept involving front bumper spoiler and the rear diffuser of Toyota 86 / Subaru BRZ.

Fitted with a flap that takes into account the aerodynamic on the front side to realize the sleek rectification effect. 

Sync perfectly with the distinctive design of 86/ BRZ normal body and gives more sporty and aggressive outlook.

BLITZ SIDE STEP FOR SUBARU BRZ ZC6 FA20 60154

LAILE BEATRUSH REINFORCED DIFFERENTIAL MEMBER FOR IMPREZA VAB VAG GRB GVB LEGACY BL5 BP5 BE5 BH5 LEVORG VMG FORESTER SJG S76102MTD-FM

 

LAILE BEATRUSH REINFORCED DIFFERENTIAL MEMBER FOR IMPREZA VAB VAG GRB GVB LEGACY BL5 BP5 BE5 BH5 LEVORG VMG FORESTER SJG S76102MTD-FM

1. The genuine differential member bush uses rubber bushings with low hardness for ride comfort. 

2. The Laile Beatrush however uses reinforced differential rigid urethane member for the bush part. In this case, the movement of the rear differential is controlled when accelerator is ON / OFF that makes it easy to convey the drive directly. 

3. Vibration and sound from the engine will be more easily transmitted by using this reinforced differential member.

CAUTION :

**This item is prohibited or restricted to use on the general way by some countries and areas. Please use according to the law. 

**Laile Beatrush will not give compensation for any damage by any accident in relation to this item at all.

Specifications: 
Material: Steel body & Urethane (Hardness 90)
Weight: 2.4 kg
Installation: Bolt on

LAILE BEATRUSH REINFORCED DIFFERENTIAL MEMBER FOR IMPREZA VAB VAG GRB GVB LEGACY BL5 BP5 BE5 BH5 LEVORG VMG FORESTER SJG S76102MTD-FM