MAX ORIDO AERO SET PAINTED 1 TONE FOR TOYOTA GR86 ZN8 AKE-S11-MBK

 

MAX ORIDO AERO SET PAINTED 1 TONE FOR TOYOTA GR86 ZN8 AKE-S11-MBK

Max Orido Yokohama103 Aero Kit. Kit Contents: 

1. Front Lip Spoiler 
2. Front Side Fin 
3. Side Step 
5. Rear Diffuser
6. Trunk Spoiler

Total driving experience is increased with this beautiful and practical aero set, apart from this GR86 exhilarating sound from an enhanced horsepower.

MAX ORIDO AERO SET PAINTED 1 TONE FOR TOYOTA GR86 ZN8 AKE-S11-MBK

VARIS ARISING-I COOLING BONNET HOOD CARBON FOR HONDA CIVIC TYPE R FK8 VBHO-105C

 

VARIS ARISING-I COOLING BONNET HOOD CARBON FOR HONDA CIVIC TYPE R FK8 VBHO-105C

Excellence cooling effect for the whole engine system will gives better advantages in term of efficiency for a high performance and high horsepower car.

VARIS ARISING-I COOLING BONNET HOOD CARBON FOR HONDA CIVIC TYPE R FK8 VBHO-105C

TOYOTA SUPRA(RZ) DB42 ECZ8YDB42 ENDLESS REAR INCH UP VERSION2 SYSTEM INCH UP KIT 2 REAR

 

TOYOTA SUPRA(RZ) DB42 ECZ8YDB42 ENDLESS REAR INCH UP VERSION2 SYSTEM INCH UP KIT 2 REAR 

The braking system introduced by Endless for Toyota Supra (RZ) is significant enough to manage improved horsepower from this machine.

Rotor (Dia/Thick): 355×24 (2PCS)
Pad: EP536
[Main kit contents]
Outer housing
Brake pads (genuine same type)
Support bracket
2 piece type large diameter brake rotor
Exclusive brake line

*Rotor column 1PCS is genuine 1-piece type, 2PCS is 2-piece type, and 3PCS is rear 3-piece type. (Floating is a separate order) 

*The rotors for Racing MONO6/ MONO6r/ MONO4/ MONO4r are E slit type, and all other rotors are carving slit type. 

*Please see here for how to use the pattern paper. 

*Brake Kit = Rotor is not included. 

*System kit = same size rotor as stock is included

*System inch up kit = larger size rotor is included.

Manual is only available in Japanese.  You need to consult a professional to install the kit

ENDLESS REAR INCH UP VERSION2 SYSTEM INCH UP KIT 2 REAR FOR TOYOTA SUPRA(RZ) DB42 ECZ8YDB42

TOYOTA 86 SUBARU BRZ FA20 31170-FA2-000

 

TOYOTA 86 SUBARU BRZ FA20 31170-FA2-000 TODA RACING TENSIONER & IDLER PULLEY KIT 

1. The FA20 Light Weight Front Pulley KIT was praised for it great reputation for the performance and horsepower improvement.

2. Since then, TODA Racing had added a Light Weight Idler Pulley set to complement the success of the front pulley kit. 

3. It is recommended for those who had already installed the TODA Light Weight Pulley Kit. 

4. Increased strength Idler pulleys can assist to keep the original pulley ratio for high load applications such as superchargers.

5. These idler pulleys are a direct replacement for the standard pulleys. 

6. Made from A7075 duralumin and given a hard anodized (Alumite) coating.

**Duralumin is an alloy 95% aluminium, 4% copper, 0.5% manganese and 0.5% magnesium.

**Duralumin is strong, hard, lightweight alloy of aluminum. Widely used in aircraft construction, discovered in 1906 and patented in 1909 by Alfred Wilm, a German metallurgist. It was originally made only at the company Dürener Metallwerke at Düren, Germany.

TODA RACING TENSIONER & IDLER PULLEY KIT FOR TOYOTA 86 SUBARU BRZ FA20 31170-FA2-000

TOMS REAR DIFFUSER DRY CARBON FOR TOYOTA SUPRA DB02 DB22 DB42 DB82 52159-TDB42

 

TOMS REAR DIFFUSER DRY CARBON FOR TOYOTA SUPRA DB02 DB22 DB42 DB82 52159-TDB42

Compatible Car: TOYOTA SUPRA DB02 DB22 DB42 DB82

TOMS REAR DIFFUSER DRY CARBON FOR TOYOTA SUPRA DB02 DB22 DB42 DB82 52159-TDB42

SARD MOTION CONTROL BEAM FOR TOYOTA GR SUPRA DB42 02 06 86706

 

SARD MOTION CONTROL BEAM FOR TOYOTA GR SUPRA DB42 02 06 86706 

MCB (Motion Control Beam) achieves both steering stability and improved ride quality by connecting the left and right front members and the rear struts. 

AISIN's unique mechanical structure suppresses roll while suppressing unpleasant vibration during turning.

This is a great control mechanism for vibration from performance cars with great horsepower ability.

**MCB kit contents: One front, one rear

SARD MOTION CONTROL BEAM FOR TOYOTA GR SUPRA DB42 02 06 86706 

KREISSIEG REINFORCED EXHAUST VALVE FOR FERRARI F355 F355-03

 

KREISSIEG REINFORCED EXHAUST VALVE FOR FERRARI F355 F355-0

Heat resistance and durability have been further improved by using a large actuator and Quattro bush with a heat insulator (heat resistant plate).

(Compatible with vehicle inspection)

KIT contents: 

- Reinforced exhaust valve / actuator (with heat insulator)

- Material: Stainless steel

- Valve inner diameter: 60 mm

KREISSIEG REINFORCED EXHAUST VALVE FOR FERRARI F355 F355-03

VOLKSWAGEN GOLF 7 AUCJXF AUDJHF FRI-0228 GRUPPEM RAM AIR SYSTEM

 

VOLKSWAGEN GOLF 7 AUCJXF AUDJHF FRI-0228 GRUPPEM RAM AIR SYSTEM 

Compatible Engine: CJX / DJH

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code:-
Displacement: 2.0 LITER 
Grade / Specifications: R (including 7.5R) 

TURBO 

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower down and stabilize the intake air temperature. 

Gives excellence torque and power-up in the entire range from low to high revs and subsequently may improve the horsepower.

You may enjoy the sporty intake sound with this unit. Installation is bolt-on with a dedicated fitting adapter. 

VOLKSWAGEN GOLF 7 AUCJXF AUDJHF FRI-0228 GRUPPEM RAM AIR SYSTEM 

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

 

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

1. The need for increased performance and horsepower for Civic Type R engines are truly overwhelmed.

2. Those serious demands had led TODA RACING to step up and design a better single progressive coil spring to replace the STD double valve springs. 

3. Although allowing valve lifts of up to 13.0mm, the material and the coil springs natural frequency have all been optimized.

**Can be used up to 13.0mm of lift.

TODA RACING UP RATED VALVE SPRINGS FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14750-F20-000

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

 

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

Year Model: 2021.08 + 
Engine: 2400 FR 
Grade: R, S 
Front Lowering: -20 

Rear Lowering: -20 
Rate: F: 33 Rear: 45.1 
Travel: Front: 244 Rear: 267

TEIN HIGH TECH LOWERING SPRINGS FOR SUBARU BRZ ZD8 SKAEA-G1B00

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR

 

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR 

Model Year: 2009/5 ~ 
emissions: 2000 TB 
Series: Ti2000 DOWN 
set: R 
down width (mm): 25 ~ 20 
spring rate (kg / mm): 2.96

VOLKSWAGEN SCIROCCO 13CAW W700TDR RS-R SUSPENSION TI2000 DOWN REAR 

TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201 REINHARD A TYPE MUFFLER STAINLESS EXHAUST

 

TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201 REINHARD A TYPE MUFFLER STAINLESS EXHAUST 

Compatible Car: Toyota Supra JZA80 TB

Compatible Engine: 2JZ-GTE

Year Model: 93.05~97.08 

EXP: 76.3Φ 

Specifications Tail Size: 125Φ Shell Double 100ΦW 

Type: Compatible 

Material: All Stainless Steel 

Volume: -

**For turbos 

**Cannot be installed on late model (VVT-I) **Not compatible with aftermarket aero 

**Inner sold separately

**Great to unleashed true horsepower from JZA80

REINHARD A TYPE MUFFLER STAINLESS EXHAUST FOR TOYOTA SUPRA JZA80 TB 2JZ-GTE RTA1201

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

 

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

Compatible Engine: 2JZ-GTE
Model Year: 93.05-05.08 
Conformity I / J: A / C * 1 * 2 
Fitting: φ8

Advantages of the SARD Fuel Delivery Pipe (63630)

1. Increased Fuel Delivery Capacity

SARD fuel rails are engineered to handle higher fuel flow compared to the OEM units. This is especially important for boosted engines and tuned applications where maintaining consistent fuel pressure is critical. 

2. Durable, High-Quality Construction

The part is crafted from high-grade aluminum and finished with an anodized coating, offering improved heat resistance and durability. 

3. Supports Larger, Top-Feed Injectors

If you plan to upgrade injectors for higher flow rates, the SARD fuel rail supports larger top-feed injector configurations. 

4. Adaptable for Custom Setups

The rail features fittings that make it easier to integrate regulators, pressure gauges, or custom fuel lines—ideal for tailored tuning setups. 

5. Easier Installation and Maintenance

By virtue of a clean, solid build and well-designed fittings, the SARD fuel rail simplifies installation and is convenient for quick maintenance or troubleshooting.  

Summary

The SARD Fuel Delivery Pipe (63630) for the JZA80 offers:

• Robust construction with anodized aluminum
• Enhanced fuel flow for tuned or boosted setups
• Compatibility with larger, top-feed injectors
• Flexibility for custom fittings and fuel system enhancements

This makes it a smart upgrade for anyone aiming to increase performance, reliability, or ease of tuning on their 2JZ-GTE engine.

SARD FUEL DELIVERY PIPE FOR TOYOTA SUPRA JZA80 63630

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

 

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

GruppeM Original Aero Parts -MADE IN JAPAN- 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Material: FRP White Gel Coat Finish 
Displacement: 3.3 LITER 
Grade Specifications: TURBO 

* Optional downforce board DBB-911 can be installed at the same time.

GRUPPEM FRONT BUMPER SPOILER TYPE FBRS FOR PORSCHE 911 (930) TURBO 911 FBRS-911T

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005

 

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005

Model: K20C 
Model Year: 17/09- 
Type: R type INTERCOOLER 
Core Size・Location: 695x178x100 
Type: R type

HKS INTERCOOLER KIT (CORE) FOR HONDA CIVIC FK8 TYPE R K20C 13001-AH005