OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

 

OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

1. Utilized a lightweight and durable A5052 aluminum material (thickness: 2 mm).

2. OKUYAMA Alfa GT floor subframe can be installed at the same time.

3. Rectifies the air flowing into the lower part of the engine room. 

4. By flattening the lower part of the vehicle, the rectification effect of the lower part of the vehicle is improved at high speeds and appropriate downforce is generated. 

5. A panel is also placed on the side of the under panel to improve aerodynamics and cooling effect. 

6. When drain the oil from above when changing the oil, the oil element can be replaced by removing only one side of the side panel when replacing the oil element. 

7. The under panel OKUYAMA for Alfa GT can secure a lot of road clearance by raising the panel body above the genuine under cover. 

8. A louver is provided on the panel surface to efficiently exhaust the hot air in the engine room and improve the cooling effect. 

OKUYAMA UNDER PANEL SIDE PANEL FOR ALFA ROMEO GT ALFA GT 93720L 509-732-1

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

 

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

Compatible Engine: 4B11(T) 2.0L 

Manufacturer: GruppeM 
Brand: M 
Displacement: 2.0 LITER 

Grade / Specifications: Turbo 

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower and stabilize the intake air temperature. 

Achieves torque and power-up in the entire range from low to high revs. 

You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR MITSUBISHI LANCER CZ4A FR-0457

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING

 

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING 

1. The ultra-lightweight body is realized by adopting a full carbon monocoque.

2. The Alfa Romeo 4C is equipped with a 1.75L direct injection turbo that gives 240PS. 

3. This Alfa Romeo's first midship "4C" boasts an impeccable degree of perfection. 

4. However, at a high level condition such as sports driving on a circuit, there is a significant room for improvement noticed by Kansai Service.

5. High performance Alfa Romeo C4 with an enhanced horsepower band requires a good downforce management with Kansai Service Rear Wing.

ALFA ROMEO 4C 96018 KAA001 KANSAI SERVICE CARBON REAR WING 

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

 

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

Ladder bar plus aluminum
MAZDA ROADSTER NA NB HOOD

SAITO ROLLCAGE LADDER BAR ALUMINUM FOR MAZDA ROADSTER NA NB

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

 

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

The J’S Racing XA-H3 4-2-1 Stainless Exhaust Manifold is one of the most respected naturally aspirated headers for the EG6 Civic SiR. 

Unlike many 4-1 race headers that focus mainly on peak horsepower, the XA-H3 uses a 4-2-1 layout optimized for mid-range and top-end torque, making the car faster and more responsive in real-world driving and circuit use.  

Performance Characteristics

• Stronger low-to-mid RPM torque than typical 4-1 headers.
• Improved throttle response when exiting corners.
• Maintains good power up to VTEC and redline.
• Handmade stainless construction with lightweight tubing.
• Developed through extensive dyno and track testing by J’S Racing.  

Engine: B16A

1. Designed with serious consideration on torque that support the horsepower and overall performance.

2. Improves torque response over the entire range from low/ medium speed to high rpm. 

3. Material: SUS304 stainless steel 4-2-1 type pipe diameter 40-45-50φ.

4. Welds may damage due to engine vibration caused by deterioration of the engine mount over time. 

5. Repairs are available at actual cost by J’S Racing.

**Only the head side gasket is included.

J'S RACING 4-2-1 STAINLESS EX MANI FOR HONDA CIVIC EG6 B16A XA-H3

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

 

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

Model Year: 13/10- 

The W-003 Brake Pad Front from Endless gives the driver a sense of security with its overwhelming stopping power and stable braking feeling. 

Featuring exceptional quality specifications that assist for greater braking power for improved horsepower Volkswagen Golf VII.

Material: Ceramic carbon metal 
Rotor proper temperature range: 200°C~850°C 
Average coefficient of friction: 0.40~0.45 
Driving field: Circuit
Best match tire: S tire

VOLKSWAGEN GOLF VII GTI AUCHH EIP257-W-003 ENDLESS W-003 BRAKE PAD FRONT

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

 

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

  **The GruppeM Ram Air System is a top-tier choice for R35 GT-R owners seeking both performance and style, making it an ideal upgrade for street, track, or enthusiast builds.

The GruppeM Ram Air System (FR-0212EVO) for the Nissan GT-R R35 (VR38DETT) is a premium intake upgrade designed to improve performance, enhance engine response and provide a distinctive intake sound. 

Built with high-quality materials and advanced engineering, this system is ideal for enthusiasts seeking both power gains and aesthetic appeal.

Key Features:

1. Vehicle Compatibility:

• Designed for the Nissan GT-R R35 with the VR38DETT 3.8L twin-turbo engine.

• Suitable for both stock and modified setups.

2. Performance Enhancements:

• Carbon Fiber Duct Design: Prevents hot engine bay air from entering the intake, ensuring a supply of cooler, denser air.

• Improves torque and power output across the entire RPM range, from low-end responsiveness to high-end peak performance.

• Stabilizes intake air temperatures, resulting in consistent power delivery under various conditions.

3. Sporty Intake Sound:

• Produces a distinctive and exhilarating intake sound, adding to the driving experience.

• Provides an audible indication of the increased air volume entering the engine.

4. Bolt-On Installation:

• Comes with a dedicated fitting adapter for easy and secure installation.

• No cutting or extensive modifications required, maintaining the integrity of your GT-R.

5. High-Quality Construction:

• Made with precision-engineered carbon fiber for lightweight durability and heat resistance.

• Adds a visually striking component to your engine bay.

Benefits:

• Power Gains: Noticeable improvements in horsepower and torque throughout the rev range.

• Cooler Intake Air: Optimized air intake for enhanced performance and reliability.

• Aesthetic Appeal: The carbon fiber construction elevates the engine bay’s appearance.

• Improved Throttle Response: Faster and smoother power delivery.

GRUPPEM RAM AIR SYSTEM FOR NISSAN GT-R R35 FR-0212EVO

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S

 

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S

This is an improved version rotor kit from REIMAX with the tooth thickness increased by 2 mm compared to the genuine rotor. 

Stable oil pressure can be secured even in situations where oil temperature rises such as for turbo and sports driving. 

Stable oil pressure is crucial during high performance driving that in adverse, support the performance from your horsepower improved machines.

*When installing, cut the oil journal of the genuine cover by 2mm by machining. 

Material: SCM440H
Outer rotor diameter: 77Φ
Rotor tooth thickness: T=14MM
Spacer: t=2.0mm

REIMAX CAPACITY UP ROTOR KIT 77 FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 FA20 A1510-FA20S

 

Dodge 15-16 Charger R/T Scat Pack 392 6.4L V8 57-1675-BLK-6 HPS Performance Black Reinforced Silicone Radiator + Heater Hose Kit Coolant  

This HPS black high temp 3-ply reinforced silicone coolant hose kit (part number 57-1675-BLK) replaces 15-16 Dodge Charger R/T Scat Pack 392 6.4L V8 stock OEM rubber upper and lower radiator hoses.

Featuring heater hoses with high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F).

Key Features:
- The premium grade high-heat resistance reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment.
- Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber upper and lower coolant hoses.
- Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat.
- HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty.

Vehicle Application
- 2018 Dodge Charger R/T Scat Pack 392 6.4L V8
- 2017 Dodge Charger R/T Scat Pack 392 6.4L V8

Replace the following OEM coolant hoses
Upper Hose - OEM Part Number: 05040052AC
Lower Hose - OEM Part Number: 68248846AE
Heater Hoses OEM Part Numbers: 68248847AF, 68237767AC, 55038134AF

HPS Performance Black Reinforced Silicone Radiator + Heater Hose Kit Coolant for Dodge 15-16 Charger R/T Scat Pack 392 6.4L V8 57-1675-BLK-6

 

Corsa 15-16 Dodge Charger SRT Scat Pack RT 6.4L Black Sport Cat-Back Exhaust cor14995BLK

This Sport Cat-Back from Corsa for Dodge Charger SRT Scat Pack RT 6.4L are blessed with an excellence specification that surpass other competitors.

*Aggressive Performance Sound* Corsa systems are all acoustically styled and engineered to match the make, model and harmonics specific to your vehicle. 

*No Drone* The RSC™ technology eliminates "problem" frequencies that cause interior drone/resonance at cruising speeds. 

*Improved Horsepower And Torque* Patented non-restrictive Straight-through design reduces back pressure and frees up additional power.

*Potential For Better Fuel Economy* Less back pressure and more power means your engine functions more efficiently and that translates into better fuel economy.

*Premium 304L Stainless Steel Construction* The combination of 304L stainless steel construction and the fact that Corsa systems don't use cheap easily degraded packing materials ensure your product will last. 

*Limited Lifetime Warranty* The combination of 304L stainless steel construction, exceptional quality material.

*Included All Necessary Hardware And Full Color Instructions* Corsa systems come with top quality TORCA Clamps, that are also 304SS and instructions that feature actual full color photos to make your install as simple as possible.

*50 State Emissions Legal* Corsa systems are all designed to install rearward of the factory catalytic converter there are no emissions hassles. Just bolt it on and go.

 *Handcrafted In The USA* Every Corsa system is proudly manufactured in Berea, OH, USA.

Corsa 15-16 Dodge Charger SRT Scat Pack RT 6.4L Black Sport Cat-Back Exhaust cor14995BLK

CPM STRUT BRACE FOR BMW M3 G80 M4 G82 G83 CSRB-B206

 

CPM STRUT BRACE FOR BMW M3 G80 M4 G82 G83 CSRB-B206

1. The CPM Lower Reinforcement is attached to the chassis frame.

2. It cannot be seen unless it is lifted up after installation. 

3. Although placed in an invisible place, there is no compromise in its manufacturing. 

4. At the machining center, only those that have passed the inspection according to CPM inspection standards are alumite processed and become products. 

5. CPM utilized their experience in manufacturing racing car parts and develop reinforcement parts for streets from the know-how gained from racing technology. 

6. Provide an appropriate balance that never becomes too hard. Realize optimal body reinforcement for everyday scenes. 

7. By installing CPM Lower Reinforcement, a sense of unity between the front and rear is created, and it is possible to improve vehicle performance that can never be obtained by standard.

8. Improve steering response, improve high-speed stability and reduction of creaking noise in the car, all of those give significant support for your horsepower improvement strategy.

CPM STRUT BRACE FOR BMW M3 G80 M4 G82 G83 CSRB-B206

SAMCO SPORT TURBO HOSE KIT BLUE FOR RENAULT ALPINE A610 V6 TURBO 40TCS33-BLUE

 

SAMCO SPORT TURBO HOSE KIT BLUE FOR RENAULT ALPINE A610 V6 TURBO 40TCS33-BLUE

Series Name: TURBO HOSE KIT BLUE

Compatible Car: RENAULT ALPINE A610 V6 TURBO

Engine Model: D501/D502 
Model Year: 86~92 
Hoses Count: 5 

SAMCO SPORT TURBO HOSE KIT BLUE FOR RENAULT ALPINE A610 V6 TURBO 40TCS33-BLUE

SPOON ALUMINUM RADIATOR FOR HONDA CIVIC FL5 K20C 19010-FL5-010

 

SPOON ALUMINUM RADIATOR FOR HONDA CIVIC FL5 K20C 19010-FL5-010

This is SPOON SPORTS newly release ALUMINUM RADIATOR for 11th Civic Type R FL5 K20C.

1. Among the most important thing during sports driving is engine cooling effectiveness. The chosen radiator shall be extremely reliable and good.

2. The 11th Civic Type R FL5 K20C that equipped with a turbocharger will generate an extensive amount of heat. The water temperature will rise quickly, making it difficult to cycle around the circuit continuously. 

3. Replacing the thermostat or lowering the operating temperature of the cooling fan can slow the rise in water temperature to some extent.

4. However, to maintain the optimal temperature that suite to the excessive conditions, you will need to replace your current standard radiator with a more effective radiator.

5. With race complexity in mind, SPOON had introduced a prototype product with a core thickness of 42 mm to the Thunderhill 25 Hour Race and were able to confirm its effectiveness. 

6. When tested later on street car, the cooling performance requirement is almost the same as race medium, thus this exceptional radiator was brought for street use for good. 

7. An effective radiator will manage the cooling properties better and will support horsepower improvement for your 11th Civic Type R FL5.

Notes & special notes: 

*Made of aluminum, upper/ lower tank is billet tank, core thickness is 42mm. 

*Please use together with THERMO STAT 19301-FK8-000. 

*Please cut the hose on the radiator side by 10mm and install it.

SPOON ALUMINUM RADIATOR FOR HONDA CIVIC FL5 K20C 19010-FL5-010

CUSCO TURBO ASSEMBLE FOR MITSUBISHI LANCER EVO10 CZ4A C4937801635

 

CUSCO TURBO ASSEMBLE FOR MITSUBISHI LANCER EVO10 CZ4A C4937801635

1. 100% compatible bolt-on type replacement for the genuine turbine power down due to several factors:

- over driving

- aging 

- deterioration 

2. Use high-quality, high-performance turbines that are genuine (made by IHI for GDB Impreza).

3. Completely compatible with genuine turbo for better horsepower improvement options.

4. Genuine ECU compatible, no need for troublesome setup plus good cost reduction.

5. Since it is a genuine compatible product, it can be combined with genuine turbine compatible tuning parts. 

6. The IHI uses a ball bearing turbine like the genuine one.

CUSCO TURBO ASSEMBLE FOR MITSUBISHI LANCER EVO10 CZ4A C4937801635

SPOON STEERING GEAR BOX RIGID BUSH KIT SUSPENSION PARTS FOR HONDA CIVIC FD2 53685-FD2-000

 

SPOON STEERING GEAR BOX RIGID BUSH KIT SUSPENSION PARTS FOR HONDA CIVIC FD2 53685-FD2-000

1. SPOON participates in various endurance races and accumulated many experiences both in Japan and abroad.

2. Intense experience in race scenes had enabled SPOON to propose high performance parts for the development and tuning and significantly led to horsepower improvement as a whole.

3. SPOON focused on the rubber bush of "Stellion Gear BOX" which moves unstably at the front and made STD's gear box rigid using Al material. 

4. There is no negative element such as straightness like an arrow and handling affected by the road surface. This kit improved the posture stability of the car body even when in lift. 

5. It turns into an ideal handling machine with direction changes with little steering angle. 

6. There will be no issues for everyday use with good suppression on vibration including durability.

SPOON STEERING GEAR BOX RIGID BUSH KIT SUSPENSION PARTS FOR HONDA CIVIC FD2 53685-FD2-000