GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

Compatible Engine: 
Displacement: 5.0 L 
Grade / Specifications: V10 SPYDER 
Genuine part number: 07L133843D 
Product brand: K & N 
Product category: Genuine replacement filter 

REPLACEMENT 
Filter shape Size: Panel square ・ Long side 325 x Short side 159 mm. 

1. A genuine replacement type air filter that maximizes the characteristics of the genuine cleaner BOX that is not affected by the heat in the engine room. 

2. The filter medium uses a unique wet cotton 4-layer filter that has a proven track record and is reliable over many years of racing. 

3. Achieves excellent response and performance improvement by achieving both suction resistance and filtration performance at a high level. 

4. Can be used repeatedly by cleaning with the separately sold maintenance kit for K & N (part number 99-5000).

GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

Rotor (Dia/Thick): 

Fr: 380x34 (2PCS) type

Rr: 355x32 (3PCS) type

Pad Fr: RCP121 

Pad Rr: RCP122

1. Monoblock caliper "RacingMONO6" are forged with thousands of tons of pressure. 

2. Four years after conception and one year after the completion of the prototype, this ENDLESS caliper had undergone abundance test races and specifications changed many times.

3. The processing of the highly difficult piston cylinder is cleared by using advanced special technology. 

4. Finishing body done with super hard alumite treatment. 

5. FRONT: "High rigidity" and "light weight" proven by forged monoblock.

6. REAR: 6POT forged monoblock caliper for rear.

7. Kit contents (main)

Caliper body (ultra-hard alumite) 

Exclusive caliper brake pads 

Mounting bracket 

Large diameter brake rotor 

Brake line for caliper 

Caliper body color: Super hard alumite

8. The rotors for RacingMONO6/ MONO6r/ MONO4/ MONO4r are E slit type and all other rotors are carving slit type.

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

 

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

1. Made of fiber mesh + 3 layers of silicon to ensure heat resistance and durability. 

2. The straight shape of the genuine bellows structure reduces suction resistance and promotes smooth intake. 

3. GReddy direct suction has a capacity increase of about 50% at 1395cc compared to the volume of 910cc of the normal intake hose (excluding resonator). 

4. Weight is reduced by 25% compared to normal and weight is reduced by about 150g. 

5. Color variations: Blue, red, black genuine replacement installation (reference work time: 20 minutes). 

6. The resonator under the pipe cannot be installed. Therefore, the intake noise may increase.

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

 

STILLEN GEN 2 INTAKE 09-17 NISSAN 370Z stln40285

1. Product Features:
•Twin Mandrel Bent Polished Aluminum Intake Tubes
• Polyurethane Heat Shields
• High Quality Washable Oiled Filter
• Increased Throttle Performance and Horsepower
• CARB Exempt - E.O. #D-436-22 

2. Nissan 370Z Air Intake - (Gen 2) Dual Long Tube w/ Polyurethane Heat Shields [Z34] - Oil Filter - 402851

3. BENEFITS:
• 13WHP / 9WTQ Peak Gain, Consistent Improvement Across The 

Rev Band*

• Built To Last - Designed & Manufactured in U.S.A.
• More Efficient Air Filter Media & Enhanced Airflow Improves mileage per gallon (MPG).
• Improved throttle response
• Easy To Install - Simple Enough To Do In Your Driveway
• Visually Improves Your Engine Bay
• Runs Great On Stock Tune - No CEL, No Tune Needed!
*Results May Vary!

4. Great option to increase engine performance with the STILLEN air intake for Nissan 370Z Z34. The GEN 2 features the most optimal horsepower and torque gains. 

5. This STILLEN Nissan 370Z air intake has a polished finish. This Z34 370Z intake provides a better air flow to the engine with the smooth surface tubing construction.

6. The Dual Throttle Body 6th gen 370Z owners who want improved performance with a show quality shine, can do so with STILLEN Gen 2 Long Tube Intakes. 

7. STILLEN had replaced the restrictive factory air boxes with two (2) oil filters. 

8. These filters are designed with an integral velocity stack and attach to the newly designed polished aluminum long tubes. 

9. Replacing the factory intake tubes with STILLEN design will add additional horsepower and a great look for the engine bay.

10. The Z34 filters sit inside custom-fitted urethane intake boxes, which ensure no hot engine compartment air gets sucked into the intake tract. 

11. This will create a cold air path and unlike other manufacturers who only partially shield the filter from hot underhood air, STILLEN has fully enclosed the filters and draws on cold air from behind the grille, for optimum performance.

12. The STILLEN Generation 2 Long Tube Dual Hi-Flow Intake for 6th gen 370Z is mild under cruising situations, and really comes to life creating an impressive intake note under acceleration.

***Does not fit fit 2018+ model vehicles. For those vehicles STILLEN highly recommend an extremely popular Gen. 3 intakes.

STILLEN GEN 2 INTAKE 09-17 NISSAN 370Z stln40285

 

ACT HD Clutch Kit Mazda Mx-5 Miata(2006) ACTZM5-HDR4

1. This kit features ACT's most popular Heavy Duty pressure plate in the market for high performance drive.

2. ACT Heavy Duty pressure plates use exclusive diaphragm design:

- to increase clamp load

- to reduce deflection

- to maximize clutch life

3. All diaphragms undergone a four-stage, heat-treating process for unparalleled performance. 

4. ACT pressure plates have precision cover stampings to provide rigidity and consistency. 

5. ACT's spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. 

6. ACT spring retainers utilize wrap around spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

7. This is a great clutch that will improve true potential for Mazda Mx-5.

ACT HD Clutch Kit Mazda Mx-5 Miata(2006) ACTZM5-HDR4

 

McLeod RXT 1200HD Twin Disc Clutch Kit Toyota Supra 93-98 Steel Flywheel for 2JZ-GTE V160 Trans mlr6482230HD

1. McLeod RXT 1200HD Twin Disc Clutch Kit for Toyota Supra 93-98 2JZ-GTE is able to handle up to a stunning 1200HP.

2. It was specifically engineered for the high/ improved horsepower for streets / circuits enthusiasts. 

3. This McLeod RXT 1200HD Twin Disc Clutch Kit for Toyota Supra 93-98 2JZ-GTE can handle almost any horsepower possible but still remain street type friendly.

4. The ceramic lined clutch discs will provide smooth engagement with a moderate pedal effort. This characteristic makes this clutch kit ideal for the street/ strip enthusiasts.

5. This clutch is perfect for the person that wants the best of both worlds. 

6. If you want to drive to the track then rip off a bunch of ¼ mile passes then drive back home, then this RXT 1200 is what you’ll need! 

7. This series of clutch comes in 3 different configurations to best suit your needs. 

**8. Adapter ring version. Another McLeod Racing exclusive. This twin disc clutch uses a patented approved adapter ring to bolt to your supplied flywheel. Complete unit with dedicated flywheel. 

9. No need to search for the clutch as one number and the flywheel as another number. 

10. McLeod Racing has you covered with one part number and a complete dedicated unit ready to plug and play. 

11. You have the choice of running a Billet Steel flywheel for your street applications or a Billet Aluminum flywheel for your track cars.

McLeod RXT 1200HD Twin Disc Clutch Kit Toyota Supra 93-98 Steel Flywheel for 2JZ-GTE V160 Trans mlr6482230HD

 

StopTech Sport Slotted Front Brake Rotors for Scion FR-S / Subaru BRZ 126.47021SL & 126.47021R

1. StopTech Sport Slotted Front Brake Rotors for Scion FR-S/ Subaru BRZ are specifically designed to run cooler. 

2. If has superior metallurgy and design specifications including vane designs to further promote cooler running temperatures. 

3. Venting the gas emitted by hot brake pads improves overall brake performance and helps minimize fade. 

4. StopTech Sport Slotted Front Brake Rotors will improve wet and dry brake performance and is a safer alternative to drilling crack prone holes through cast iron rotors.

5. The slotting process removes far less of the rotor's surface area than conventional cross drilling. This will help maintain the highest friction of coefficient for the brake pads against increasing initial "bite." 

6: Slotted rotors trade only 3.7% of their surface area to the slots that vent the gasses, while drilled rotors sacrifice up to 7. 75% of their surface area.

7. Less surface area means less stopping friction. The rotors are also double disc ground and mill balanced to ensure a consistent friction surface and improved pad bed-in.

8. StopTech Sport Slotted Front Brake Rotors undergone Electro coating (E-coating) finish, an electrostatic applied finish is designed to withstand 400 hours of saltwater exposure without rusting and provides long lasting corrosion protection in the critical hat and cooling vane areas.

 **NOT FOR FACTORY BREMBO EQUIPPED VEHICLES**

Additional E-Coating Advantages:

• Uniform coating thickness over all areas including sharp corners, recesses and areas that would be hard to reach with spray painting
• Paint material is water-based and nontoxic
• Approximately 95% utilization of paint with no overspray, drip or drain losses
• Complete paint coverage — no touchup ever required

9. These specific rotors' increased molybdenum (higher carbon) content further that extends reliability, longevity and helps reduce NVH "noise" issues.

10. Designed to beat the challenges of high performance driving and severe duty brake demands as well as to enhance open wheel designs.

12. All  StopTech Sport Slotted Front Brake Rotors represent one of the most cost-efficient performance brake upgrades offered in the market today.

StopTech Sport Slotted Front Brake Rotors for Scion FR-S / Subaru BRZ 126.47021SL & 126.47021R

GRUPPEM RAM AIR SYSTEM FOR PORSCHE 911 997 FR-0141

GRUPPEM RAM AIR SYSTEM FOR PORSCHE 911 997 FR-0141

1. Gruppem had engineered carbon duct that completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Shown great torque and power-up in the entire range from low to high revs. 

4. The high quality material gives a real sporty intake sound. 

5. Installation is bolt-on only with a dedicated fitting adapter. 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Code: 997 
Displacement: 3.6 LITER 
Grade / Specifications: GT3 Previous term

GRUPPEM RAM AIR SYSTEM FOR PORSCHE 911 997 FR-0141

 

C&R Racing Porsche 981 GT4 16 42mm Center Radiator cr20-05052

1. This is the same radiator used by the winning 2016 Sebring and Laguna Seca team.

2. This is a must have radiator for great performance upgrade on your 2016 Porsche GT4. 

3. C&R Performance offers radiators for the Porsche 981 GT4 built by PWR in Australia and used by top teams in The IMSA Continental Tire GS series. 

4. The center radiator featured 42mm dimple tube core technology for exceptionally unmatched heat rejection. 

5. The radiator mounts is the same as OEM mounting for ease of installation.

6. This C&R radiator will gives optimum cooling for Porsche 981 GT4 on the IMSA circuit or at any other circuits. 

7. This center radiator fits 981 GT4 race car only

C&R Racing Porsche 981 GT4 16 42mm Center Radiator cr20-05052

 

VR Aero Carbon Fiber Side Air Ducts Porsche 991 Turbo VR-991TT-650

1. VR Aero had introduced  these stylish carbon fiber side air ducts that fit Porsche 991 turbo stock pieces.  

2. The side air ducts are finished in a 2x2 carbon weave with a high gloss clear coat. 

Features:

• Carbon Fiber
• 2x2 Carbon weave
• Gloss Finish
• 3K UV resistant
• Perfect Fitment
• Added Exterior Styling
• Fits over stock ducts for easy install

Fitment:

• Porsche 991 Turbo 14-19

VR Aero Carbon Fiber Side Air Ducts Porsche 991 Turbo VR-991TT-650

 

Radium Engineering Dual Catch Can Kit S197 Shelby GT500 Fluid Lock rad20-0329-FL

1. Compatible with the 2010-2014 Shelby GT500 (S197). 

2. No permanent modifications to the vehicle are required.

3. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by oil accumulation from high performance driving. 

4. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. 

5. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned.

6. A closed loop system also promotes negative crankcase pressure for optimal performance. 

7. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. 

8. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. 

9. This kit mounts using factory holes on the chassis and integrate perfectly with the surrounding components. 

10. These two oil catch cans (PCV side and Crankcase side) function completely independent of each other and are sold together. 

11. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. 

12. No cutting, drilling or permanent modification to the vehicle is required. 

13.The kit can be installed in minutes only and is easily removed for servicing.

14. The PCV catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function.

15. Shelby GT500 (S197) Catch Can Kit Details:
- Radium Engineering catch cans feature large 10AN ORB ports

-  A 4AN ORB drain port

- 2-step oil separation baffling

- An O-ring sealed dipstick 

16. Kit inclusive of:
-Anodized oil catch cans with integrated condenser and dipstick
-Anodized laser cut Ford S197 specific mounting bracket
-Anodized aluminum -10AN adapter fittings and hose ends
-Enough 5/8" PCV hose for custom applications  
-Stainless steel mounting hardware

Note: 

- Because the Radium catch cans are pressure sealed, they are great for the supercharged applications.

- The crankcase vent catch can runs inline with the crankcase breather port. 

Radium Engineering Dual Catch Can Kit S197 Shelby GT500 Fluid Lock rad20-0329-FL

 

ISR Performance Driveshaft - LS Swap 350Z- T56 - Steel IS-DS-LS350-T56-S

1. This is a high performance 350Z with LS T56 6 Speed Steel Shaft. 

2. This is the ISR one piece driveshaft conversion for the 350Z platform with LS swap kit using the F-body T56 6 speed transmission. 

3. The ISR Performance driveshafts are designed to be the perfect fit for your conversion swap when using the corresponding ISR swap mounts. 

4. The shaft is built using Dana/ Spicer solid high performance u-joints. 

5. This shaft is only guaranteed to fit if using ISR Performance swap components.

6. Will not fit T56 Magnum transmission

ISR Performance Driveshaft - LS Swap 350Z- T56 - Steel IS-DS-LS350-T56-S

 

Brian Crower BC3301 29mm Exhaust Valves Toyota 2JZGTE Lexus 2JZGE

1. BC valves are one piece design with a friction welded Stellite tip for the best possible performance.

2. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications.

3. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/ fuel flow in and out of the combustion chamber. 

4. Every valve is fully machined and features a swirl polished finish under the head.

5. BC valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. 

6. Dished head for added weight savings and increased valve control at high rpm. Standard head diameter.

7. Specify Each size you want. Sold as a set, Will also fit 2JZGE(Non-Turbo) Cylinder heads.

Brian Crower BC3301 29mm Exhaust Valves Toyota 2JZGTE Lexus 2JZGE

 

Corsa 06-13 Chevrolet Corvette C6 Z06 7.0L V8 Air Intake cor44108-1

1. This air intake used an advanced PowerCore Filtration Technology to improve efficiency. 

2. It was manufactured by Donaldson with special design channel that directs air to the engine. 

3. Every filter box is engineered to each specific application for low restriction and increased air volume. 

4. The cross-link polyethylene box protects the filter from engine heat, moisture, dust and debris to provide colder air to the engine. 

5. Air ducts are sculpted in such a way to maximize breathing capabilities of your engine. 

6. Larger diameters, unique bends and smooth transitions will give you maximum horsepower you need.

7. Polished lid embossed with the CORSA Performance logo features a high-grade neoprene foam backing for sound insulation that enhances your engine compartment. 

8. Marine-grade stainless steel clamps provide optimal performance with a solid seal that will not loosen or deteriorate. 

9. High performance silicon connectors provide flexibility while maintaining thermal stability.

Corsa 06-13 Chevrolet Corvette C6 Z06 7.0L V8 Air Intake cor44108-1