AIRAID Intake Kit- Ford Mustang Shelby Gt 350 V8-5.2L F I 16-18 air451-378

1. This is an ultimate AIRAID intake kit for cold air induction system.

2. It will gives higher level of horsepower and acceleration for Ford Mustang Shelby undoubtedly.

AIRAID Intake Kit- Ford Mustang Shelby Gt 350 V8-5.2L F I 16-18 air451-378

FUJITSUBO LEGALIS R TYPE EVOLUTION EXHAUST FOR JZA80 SUPRA 3.0 TWIN TURBO 790-25033

FUJITSUBO LEGALIS R TYPE EVOLUTION EXHAUST FOR JZA80 SUPRA 3.0 TWIN TURBO 790-25033

**This is a high performance exhaust for Toyota Supra 3.0 Twin Turbo from Fujitsubo.

**Increase horsepower, torque and reduce weight up to 6.7kg for a greater performance.

1. Compatible model:

JZA80 Supra 3.0 twin turbo 

Body Type: E-JZA80 

Engine Type: 2JZ-GTE 

Year: 1993.05 ~ 1997.08

2. Maximum output:

Stock: 208.6kw (283.7ps) / 5220rpm -> Fujitsubo: 222.4kw (302.5ps) / 5670rpm

3. Maximum torque:

Stock: 397.9N · m (40.6kg · m) / 4600rpm -> Fujitsubo: 399.8N · m (40.8kg · m) / 4590rpm

4. Weight:

Stock: 19.2kg -> Fujitsubo: 12.5kg

FUJITSUBO LEGALIS R TYPE EVOLUTION EXHAUST FOR JZA80 SUPRA 3.0 TWIN TURBO 790-25033

 

DSS 2013 Subaru BRZ Scion FRS Toyota GT86 800HP Direct Bolt-in Rear Axle (Single) dssRA8601X4

1. Performance car enthusiasts had excepted this car for some time. The collaboration in between Subaru and Toyota to tap the best out of them.

2. Combination get the best part and form as one is just excellence, with the birth of this incredible BRZ FRS GT86.

3. The engineering works and design are awesome with superior boxer engine from Subaru and the diff is very similar to the 86-92 Supra. It is RWD. 

4. A very promising potential can be extract out from this car, with a correct parts and will.

5. Driveshaft Shop (DSS) had been working tirelessly with top Drift teams for this set of axles.

6. The commitment and hard work pays-off with this new 800HP Level 4 axles for BRZ FRS GT86.

7. Starting with the direct-fit billet chromoly outer CV from Subaru axles, 300M center bars are made from the material from Sweden, some of the best material DSS had used to date. 

8. The inner splines utilize the same material with a 108mm Porsche-style inner CV with upgraded chromoly internals to top it off. 

9. This set of axles was designed with punishment/ extensive testing for maximum reliability on tracks or streets.

DSS 2013 Subaru BRZ Scion FRS Toyota GT86 800HP Direct Bolt-in Rear Axle (Single) dssRA8601X4

 

Walton Motorsports Mazda BP4W Turbo Manifold - Garrett V-Band Inlet - 45mm V-band Wastegate Flange - Type B

- Engine: BP4W
- Turbo Flange : Garrett V-Band (G25/G30/G35, GTX30/GTX35)
- Wastegate Flange : 45mm V-Band Flange

Walton Motorsport Mazda MX5 Exhaust Manifold – (BP4W Engine) is different from competitors due its unique construction method.

This manifold for BP4W engine is  compatible with minor piping route modification and will add boost significantly. 

MX5 EXHAUST MANIFOLD CONSTRUCTION
Material Selection:
• Utilize the 304 Stainless steel 
• Design the head flanges in-house and outsource the precision Fiber Laser Cutting. 

• Push the tubing through the head flange and TIG weld each side. This process dramatically increases the durability of the manifold, rather than using the traditional method of welding the tube to the face of the flange. 

• The collector used is a custom billet merge collector. In-house design to exceed the performance of previous market-leading hand-fabricated version. 

Walton had utilized the complex 5-axis mill production process. This is a step above the competition by allowing precision boost control on Walton unique wastegate ports. 

The machining process over traditional fabrication ensures that there is no danger of small fragments breaking off at high temperatures that may propagate to that expensive turbo.

LIFETIME WARRANTY
Walton exhaust manifolds have been designed with some serious abuse mode. Given a lifetime warranty with huge improvement on the strength and durability.

MX5 EXHAUST MANIFOLD FEATURES
• Carefully selected 304 Stainless steel tube. Working to eliminate the risk of material failure.
• Fully Purged welded. Subsequently improving gas flow leading to increases in power and lowered response times.
• Ported Merge Collector Welded Internally and Externally. Resulting in high strength, durability, and turbo lifespan.
• Fully Smoothed Head Ports are designed to optimize gas flow, resulting in an increase of power and lowered response times.
• Optimized for use with Turbosmart Wastegates (when using the external option).
• Lifetime Warranty against manufacturing faults and defects.
• Supplied with 45mm V-Band Wastegate Flange.

Walton Motorsports Mazda BP4W Turbo Manifold - Garrett V-Band Inlet - 45mm V-band Wastegate Flange - Type B

 

Duraflex DL-R Kit for MINI Cooper 2007-2015 EXD108464

1. The 2007-2015 Mini Cooper R56 R57 R58 R59 Duraflex DL-R Body Kit - 6 Piece comprised of;

- DL-R Front Bumper Cover (108445)

- DL-R Side Skirts Rocker Panels (108447) 

- DL-R Rear Bumper Cover (108449)

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex DL-R Kit for MINI Cooper 2007-2015 EXD108464

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Dual Blue Coated Tips Volkswagen Golf R MK6 2010-2014 VWG6R-DS23B

 

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Dual Blue Coated Tips Volkswagen Golf R MK6 2010-2014 VWG6R-DS23B

1. Carved out an unrestrictive pathway to liberate exhaust flow in possession for new blazing power and fortifying audio. 

2. The versatility of valvetronic brings a whole new dimension into play; easy-to-operate to match your full power desire. 

3. The upgrade is crucial for the evolving streets, from the best maker that revolutionised the exhaust system in totality. 

4. The ARMYTRIX exclusive OBDII dongle system will reduce the installation time by 50%. This is an excellence horsepower improvement system to note.

5. ARMYTRIX offered premier quality exhaust system with attention to details for whole in the making processes.

6. The unparalleled skill from the renown craftsmen had created super perfect fitment marked an outstanding blueprint in super exhaust development.

Includes:

• Link Pipe
• Valvetronic Mufflers
• Dual Blue Coated Tips
• Remote Control Module

Features:

• Power ( HP): 14.2
• Torque ( Nm): 19.3
• Weight Saving (-Kg): 5.1
• Stainless Steel

Fitment:

• Volkswagen Golf R 2010-2014

Notes:

• ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings.

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Dual Blue Coated Tips Volkswagen Golf R MK6 2010-2014 VWG6R-DS23B

 

MBRP Porsche 2.5 Inch Axle Back Dual Split Rear Bypass Pro Series Carbon Fiber Tips For 14-20 Porsche Macan MBRPS56023CF

1. This T304 Stainless Steel 2.5 Inch Axle Back Dual Split Rear Exit Muffler Bypass Porsche 2.5 Pro Series is the best MBRP performance exhaust system that money can buy.

2. It is a series designed and built for the serious enthusiast. Constructed from T304 Stainless Steel that gives you optimum durability.

3. Built to Perform
Designed to maximize exhaust flow and minimize exhaust temperatures.  

4. Dyno Proven
Has undergone countless hours on MBRP in-house Mustang 1100 AWD-SE Chassis Dynamometer, hundreds of miles on road and track and numerous tweaks and modifications to get the most out for your vehicle.

5. Easy Installation
Bolt-on, no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps required.

6. Sound and Style
Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your vehicle.

• 2.5 Inch Axle Back
• Dual Split Rear Muffler Bypass
• T304 Stainless Steel
• 2014 and Up Porche Macan Turbo/S/GTS-Does not fit the 2.0L Tip
• 2.5 Inch IN
• 4.0 Inch OD carbon fiber Tips with T304 Stainless Steel inner sleeve
• Dual Out
• (2) 4 inch OD Dual Out Carbon Fiber Tips Included, Does Not Fit 2.0L

MBRP Porsche 2.5 Inch Axle Back Dual Split Rear Bypass Pro Series Carbon Fiber Tips For 14-20 Porsche Macan MBRPS56023CF

SPOON SET STABILIZER FOR HONDA FIT GK3 GK5 GP5 51300-GK5-000

SPOON SET STABILIZER FOR HONDA FIT GK3 GK5 GP5 51300-GK5-000

1. By adopting a high rate of 40% increase in STD ratio, roll was suppressed greatly.

2. The better roll suppression gives a high turning performance and better traction performance.

3. Stabile-up is different from damper's spring rate up, therefore making sporty maneuver is possible without sacrificing ride comfort.

4. It will improve straight running stability as well.

5. Compatible vehicle: 

HONDA FIT GK3 GK5 GP5 

6. Compatible models: 

DBA-GK3, DBA-GK5, DAA-GP5 

SPOON SET STABILIZER FOR HONDA FIT GK3 GK5 GP5 51300-GK5-000

GRUPPEM RAM AIR SYSTEM FOR AUDI RS4 8WDECF FRI-0227

GRUPPEM RAM AIR SYSTEM FOR AUDI RS4 8WDECF FRI-0227

1. Compatible Engine: DEC

2. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

3. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

4. Achieves great torque and power-up in the entire range from low to high revs.

5. You can also enjoy the sporty intake sound. 

6. Installation is bolt-on with a dedicated fitting adapter. 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Code: 8W (B9) 
Displacement: 2.9 LITER 
Grade / Specifications: TWIN TURBO

GRUPPEM RAM AIR SYSTEM FOR AUDI RS4 8WDECF FRI-0227

 

Torque Solution Thermal Turbo Blanket (Lava): Audi / VW MK7 1.8T/2.0T Gen3 / 2.5T tqsTS-TB-LVW

1. Applications: Audi / VW MK7 1.8T/2.0T Gen3 OEM Turbochargers & 2.5T

2. Torque Solution Thermal Turbo Blankets are highly effective for heat protection.

3. It will protect  components around your turbo by effectively blocking the heat produced by the hot back housing. 

4. Torque Solution blankets are made of protective insulated fiberglass layers and an external crushed volcanic lava rock layer. 

5. Interior Surface:

-Max Temperature Rating: 2300 Deg F/ 1260 Deg C 

-Continuous Use Limit: 1832 Deg F/ 1000 Deg C

6. Exterior Surface:

- Direct Contact Limit: 1800 Deg F/ 982 Deg C 

- Radiant Heat Limit: 2500 Deg F/ 1371 Deg C

7. Fits:
- Audi RS3 8P
- Audi RS3 8V
- Audi 8V S3 Quattro 2.0T

- Audi A3 8V FWD 1.8T

- Audi A3 8V Quattro 2.0T

- Audi MK3 TT Quattro 2.0T 2014+

- Audi TTS MK3 2.0T 2014+

- VW Alltrack 1.8T Gen3

- VW Golf VII GTI 1.8T Gen3

- VW Golf VII Hatchback 1.8T Gen3

- VW Golf VII Sportwagen 1.8T Gen3

- VW Golf VII GTI 2.0T Gen3

- VW Golf VII R GTI 2.0T Gen3
- IS12 1.8, IS20, and IS38 Turbo's

Torque Solution Thermal Turbo Blanket (Lava): Audi / VW MK7 1.8T/2.0T Gen3 / 2.5T tqsTS-TB-LVW

 

Tein Super Racing Coilover Kit For Subaru Impreza 2010.07-2014.08 Gvf Wrx Sti A-Line DSS78-81LS1-7

1. Front Spring Rate: 10k

2. Rear Spring Rate: 10k

Notes: 

- RECOMMENDED SPRING: HIGH LOAD TYPE. 

- RIDE HEIGHT DROP SHOWN IS RECOMMENDED VALUE FOR CIRCUIT USE AND MIGHT NOT MEET VEHICLE SAFETY REGULATIONS.

Tein Super Racing Coilover Kit For Subaru Impreza 2010.07-2014.08 Gvf Wrx Sti A-Line DSS78-81LS1-7

Maxim Works Exhaust Manifold for Honda Civic Type R EURO FN2 1100HE070

 

Maxim Works Exhaust Manifold for Honda Civic Type R EURO FN2 1100HE070

1. Engine model K20A:

Pipe diameter: Primary φ45 

Pipe diameter: Tail φ65 

2. Type 4-2-1 [Inside collector (collecting part) 2-1] ) 2-1 to achieve low-speed torque up. 

2. The shape is 4-1, but actually it is 4-2-1 SUS304TP polished finish.

3. The flange is completely machined at a machining center.

4. Maxim Works had gone to the maximum weight, strength and beauty altogether as racing parts and had realized it for street machines. 

5. This is safety standard compliant product

Maxim Works Exhaust Manifold for Honda Civic Type R EURO FN2 1100HE070

 

BMS BOV Spacer for 2022+ VW Golf/GTI MK8 BMS-BOVA-MK8GTI

1. Volkswagen Vehicle Fitment: 2022+ VW Golf/GTI MK8.

2.This easy to install BOV adapter will allow your factory electronically controlled diverter valve to create that "blow off" valve sound all turbo owners love.

3. It attached between the engine and the OEM electronic diverter valve.

4. CNC machined out of lightweight billet aluminum and anodized black to last the life of your vehicle. 

5. All required hardware included. 

BMS BOV Spacer for 2022+ VW Golf/GTI MK8 BMS-BOVA-MK8GTI

SARD TI-Z Muffler for Subaru BRZ 23002

 

SARD TI-Z Muffler for Subaru BRZ 23002

1. This muffler is compatible for Model Year: 12.04 and above and weight just 1/2 from OEM.

2. There are 2 types offered:

-One side one out type: One side one out type corresponds to genuine bumper 
-One side two out type: One side two out type is for LSR EDITION rear bumper only 

3. All titanium: 

Main Both pipe and silencer are made of ultra-lightweight titanium. It will give a unique sound typical of titanium material.

4. Adjustable length tail end: 

The tail end is adjustable in length, so you can adjust the width of the tail according to your aero and taste. 

Type: 4 left and right 
Material: Full titanium 
Weight: 7.9kg (genuine 16.8kg) 
Main pipe diameter: φ70 
Tail diameter: φ100 × 4

SARD TI-Z Muffler for Subaru BRZ 23002

 

Megan Racing Reinforced Engine Mounts for Mazda Miata '06-'13 MRS-MZ-0940

1. The MX-5 Miata is a superb small roadster with minimum weight and mechanical complexity. 

2. The MX-5 was designed with a traditional front-engine, rear-wheel-drive layout and four-wheel independent double wishbone suspension.

3. It has a longitudinally-mounted four cylinder engine which made the car very spirited.

4. With conventional body that is very light, unibody shell or "monocoque" with a (detachable) rear subframe, this is a great car indeed.

6. The Mazda MX-5 also has a unique truss work with minimize flex that create a tight, responsive feel. Many Mazda MX-5s feature limited slip differentials and anti-lock braking system. 

7. However, through the years the soft rubber bushings deteriorate after constant flexing and vibration. It will also damage due to prolong weather exposure. Teared rubber bushings may damage the transmission and engine.

8. Megan Racing has developed a Hard-Rubber/Polyurethane motor mounts for the Mazda MX-5 NC Chassis. 

9. These reinforced engine mounts by Megan Racing will allow for more energy to be transferred to the wheels instead of absorbing the energy into the soft rubber.

10. With an approximate 50:50 front/rear weight balance, the car has very neutral handling, which makes it easy to drive for the beginner and fun for the advanced driver. 

11. Inducing oversteer is easy and very controllable, thus making the MX-5 a popular choice for many.

12. No doubt that this exceptional design for street car but with aggressiveness and comfort being moulded together, the Mazda Miata MX-5 is at its own league.

13. Hardened Rubber utilized by Megan Racing for this reinforced engine mounts is rated at 70A durometer rating.

Megan Racing Reinforced Engine Mounts for Mazda Miata '06-'13 MRS-MZ-0940