aFe MACH Force-Xp Cat-Back Exhaust System for Porsche Cayman S/Boxster S (981) 13-16 H6-2.7L/3.4L afe49-36415-P

1. Utilize a dual loop design to reduce drone and improve low end torque for great horsepower improvement.

2. Constructed from 100% hand TIG-welded, 2" mandrel bent, brushed finished 304 stainless steel tubing 

3. Utilize a dual unique high flow, transverse mufflers w/ High Temp black powder-coated finish

4. 3/8" thick stainless steel flanges

5. Includes dual 3-1/2" diameter, polished 304 stainless steel tips

6. Uses all factory hanger locations for a hassle-free installation

7. Does not fit performance exhaust w/ exhaust valves

aFe MACH Force-Xp Cat-Back Exhaust System for Porsche Cayman S/Boxster S (981) 13-16 H6-2.7L/3.4L afe49-36415-P

 

ALPHA Nissan GT-R Air Oil Separator ALP.07.04.0023-1

1. This Alpha Performance GT-R Air/Oil Separator is designed to remove oil vapor from your VR38 from crankcase before it ends up in your intake tubes and combustion chamber. 

2. Oil vapor blow-by will give a detrimental effect on your engine. It will reduce power output and even causing harmful detonation by altering your air/fuel ratio.

3. Removing the Oil Vapor Blow-by definitely will increase the power and maintaining horsepower as it suppose to be.

4. Even if your car is stock, you will find an oil film in your intake tract due to the inadequate factory PCV system. 

5. As boost increases so do oil vapors. If you are using ethanol based fuels and/or are using a rebuilt aftermarket engine the problem will gets worse. 

6. The problem surfaces with oil coming out of your blow off valves making an oily, stinky mess in your engine bay.

7. This is a Maintenance Free Oil Recovery solution. To solve the problem of excess oil vapor blow-by, the ALPHA 3 tier design (air inlet, air outlet, reservoir base) effectively separates the oil. It will be discharged back into your oil pan where it belongs. 

8. A typical oil catch can will allow the oil to just sits in the reservoir until it is manually drained. By incorporating ALPHA oil drain back system (with check valve) you never have to worry about draining your oil catch can. 

9. This will lessens your chance of running low on oil or the can overflowing into your engine bay.

10. Built To Last The Life Of Your GT-R with the CNC billet aluminum body of the Alpha GT-R Air/Oil Separator. A black anodized for corrosion resistance and a stealthy look. 

11. ALPHA utilize high quality seals and AN fittings. An Alpha logo is machined into the top as a nice finishing touch to your engine bay.

12. Simple Installation- because utilize all the existing OEM ports, plumbing is made simple. 

13. Included of all the brackets, lines and hardware for a turn-key solution.

14. Exclusive Benefits
- Compatible with the Alpha Fuel Cooler
- Ensures dry intake system maximizing power output
- Oil drains back into your oil pan
- Simple installation using factory ports for plumbing
- Includes all brackets, lines and hardware
Applications
- For 2009+ Nissan R35 GT-R
- Fits all USDM, JDM and European Models (LHD & RHD)

15. Product Note
- 2015+ Nismo Edition requires AMS Coolant Expansion Tank for fitment.

ALPHA Nissan GT-R Air Oil Separator ALP.07.04.0023-1

NISMO Stabilizer Kit for Skyline GT-T BCNR33 RB26DETT 54600-RSR35

NISMO Stabilizer Kit for Skyline GT-T BCNR33 RB26DETT 54600-RSR35

1. This stabilizer will improve cornering performance by joining the left and right side suspension with a highly rigid bar. 

2. During cornering, differences in suspension stroke cause the bar to flex and exert a counterforce that pushes the tires to the ground while cutting roll. 

3. When going straight, none of these forces are called into play, so the bar remains inactive and the car's ride unaffected.

4. Application: BCNR33 all models 

5. Diameter in mm: Front: φ24.2 (hollow) 

6. Rear: φ27.2 (hollow)

7. Spring Constant N/mm (kgf/mm): Front: 26.7 (2.7) Rear: 101.0 (10.3)

8. High horsepower cars require the best stability for the best performance.

NISMO Stabilizer Kit for Skyline GT-T BCNR33 RB26DETT 54600-RSR35

KANSAI SERVICE FRONT LSD SPEC 3 FOR NISSAN GT-R KLNF03

KANSAI SERVICE FRONT LSD SPEC 3 FOR NISSAN GT-R KLNF03

1. LSD that evolves GT-R with an open front differential. 

2. While it is smooth and easy to handle, it causes the inner tires to slip during corners on circuits that run at high speeds, causing insufficient traction. 

3. To solve this problem, Kansai Service was the first to develop an original front LSD. 

4. In the circuit test by a professional driver, Kansai Service tried various sets to pursue uncompromising cornering performance from turn-in to start-up while improving traction performance. 

5. By feeding back the data obtained from it to the street, Kansai Service realized natural characteristics without sacrificing usability. 

6. Both pressure rings that can be selected from two types are 1WAY. 

7. The LSD effect is suppressed at the same time as the accelerator is turned off, enabling a corner approach with smooth steering operation.

KANSAI SERVICE FRONT LSD SPEC 3 FOR NISSAN GT-R KLNF03

 

Camaro VR Forged D09 Wheel Gloss Black 20x11 +38mm 5x120 VR-D09-2011-38-5120-GBLK

1. The VR Forged D09 is a full 1pc forged monoblock wheel. 

2. The design of this wheel is a very traditional mesh motorsports style. The split Y spoke design features lightweight pockets and machining. 

3. Manufactured using a 10,000 ton press, these wheels are incredibly strong. 

4. This wheel is perfectly matched to any luxury coupe or sedan vehicle.

Information:

• All VR Forged wheels include center caps.
• They are designed to work with most OEM TPMS sensors.
• Some wheels may require aftermarket lug nuts or bolts.
• Weights are estimated from engineering and scale tests.
• Wheels are designed to work with OEM brakes and most big brake kits.
• All wheels go through extensive testing to meet proper regulations..

Wheel Specs:

• Diameter: 20x11
• Offset: 38mm
• Bolt Pattern: 5x120
• Center Bore: 66.9
• Wheel Finish: Gloss Black
• Wheel Weight (KG): 
• Load Racing (KG): 720KG
• Lug Style: Conical
• Recommended Tire Size: Please Consult a Specialist

Fitment: Chevrolet Camaro 5-6th Gen

Camaro VR Forged D09 Wheel Gloss Black 20x11 +38mm 5x120 VR-D09-2011-38-5120-GBLK

 

Apexi World Sport II Dual Exhaust System - Honda S2000 apx116-KH26

1. The WS Exhaust series is the A'PEXi answer to the ultimate street muffler system with all around performance. 

2. The canister is made of the highest grade polished SUS304 stainless steel while the mandrel bent piping consists of high temperature, titanium particle coated mild steel. 

3. This muffler has always been the standard for aftermarket street exhaust systems. 

4. The oval canister houses a newly designed rolled tip for an extremely high class finish. 

5. Interior construction has been fine tuned for even more low to mid-range power. 

6. Countless magazine dyno tests have proven the WS exhaust to be one of the best all around exhaust systems on the market nowadays.

7. As always, all A'PEXi cat back exhaust systems come complete with all necessary hangers, nuts, bolts, and gaskets. 

8. The World Sport Muffler is for the performance enthusiast who has more on their minds than just pure power. 

9. This system is designed to provide excellent low and mid range power without excessive noise. 

10. The sporty, yet elegant look is made possible by using a polished SUS 304 stainless steel muffler, 60mm titanium particle powder coated mild steel piping, paired with a 100mm (3.93 inch) polished tip. 

11. Robotic TIG welds along with precise hand crafted welds ensured maximum longevity and performance. 

12. The WS system possesses all of the motorsports passion and intensity associated with A'PEXi products.

13. CHARACTERISTICS: Mid to high-end power

14. APEXi super fine quality World Sport II Dual Exhaust System with unique exhilarating note is sought by many.

15. It will unleash more horsepower from your high performance Honda S2000 like never before.

Apexi World Sport II Dual Exhaust System - Honda S2000 apx116-KH26

 

Collins 2JZ / 1JZ Engine to VQ / 350Z / 350ZHR / 370Z Transmission Adapter Plate and Flywheel

1. This is a 2JZ / 1JZ engine to VQ / 350Z / 350ZHR / 370Z adapter plate and flywheel combo kit.  

2. This allows you to bolt up the Nissan 350Z series of 6-speed transmissions (CD009, CD008 , CD005 , CD001 , CD000 , and JK40C) to the Toyota 2JZ and 1JZ engines WITHOUT having to MILL DOWN the bell housing.

 3. If you are looking to put a 2JZ into your vehicle this IS your solution. 

4. This flywheel allows you to simply bolt on any SINGLE plate 350Z / 370Z clutch with ease. 

5. Collins has several single plate 350Z/370Z clutch options that can hold up to 700ftlbs of torque and multi-disc clutch options that can hold 1000+ ftlbs of torque. 

6. The 2JZ to 350Z adapter plate and flywheel combo comes with everything needed to bolt this onto your engine. 

7. Given the proper ARP flywheel bolts (This is something you won’t get from anyone else), Pilot bearing adapter and the bolts to fasten the adapter plate to the engine.

8. Why spend more for an imitation? when you can buy the real thing for less from the people that started the 350Z transmission swap craze!

9. This adapter plate is made from 5/8" A36 Steel. Precision machine on Haas2 CNC machines and MADE IN AMERICA

Collins 2JZ / 1JZ Engine to VQ / 350Z / 350ZHR / 370Z Transmission Adapter Plate and Flywheel

 

DINAN FRONT STRUT TOWER BRACE - 2007-2010 BMW 135I 335I D180-0010

DINAN STRUT TOWER BRACE - 2007-2010 BMW 135I/335I Front - Carbon Fiber is compatible with models: E82/E88/E90/E92/E93

1. The Dinan Carbon Fiber Front Strut Tower Brace provides sharper handling by reducing flex under harder cornering conditions.

2. It will improve to maintain the structural integrity of the towers over the life of the vehicle. 

3. The beautiful carbon fiber brace may be installed in conjunction with any of the Dinan Suspension Systems or the stock components. 

4. The end brackets are black powder-coated CNC machined aluminum for a precise fit over the strut tower reinforcements for a clean and solid installation. 

5. Also included is a shortened battery terminal and cover.

6. Features:
- Improved chassis rigidity.
- Decreased flex in strut towers during cornering.
- Bolt-on installation on top of strut towers.
- Carbon fiber tubular center section with die-cast aluminum ends.
- Black powdercoated CNC aluminum endplates.
- Includes shortened battery terminal and cover.

DINAN FRONT STRUT TOWER BRACE - 2007-2010 BMW 135I 335I D180-0010

 

CP Pistons Set - Toyota Supra 86-92 cppSC7470-6

1. Features include superb ring seal, higher vacuum, lower blow by, greater durability and increased HP and torque up through the higher RPM band. 

2. Peak HP is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. 

3. CP Pistons commitment to your racing program is reflected in every piston produced.

4. This is a great masterpiece for racing enthusiasts.

CP Pistons Set - Toyota Supra 86-92 cppSC7470-6

 

Flowtech 18-21 Mustang Gt Axle-Back Quad Tip Exhaust System Kit - 52018FLT FLO-152018FLT

1. This Flowtech Axle-back exhaust system uses mandrel bent 2.50' diameter 409SS stainless steel for strength, durability and performance. 

2. The high-flow straight through mufflers offer a deep, aggressive exhaust tone. 

3. The system has 3.50' polished 304SS stainless steel quad exhaust tips and uses the OEM mounting points for a factory-like fitment.

4. Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

Flowtech 18-21 Mustang Gt Axle-Back Quad Tip Exhaust System Kit - 52018FLT FLO-152018FLT

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

 

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

1. The purpose of this twin block caliper is to reduce the weight of the unsprung mass. 

2. A genuine caliper weight for one piece is 5200g BUT Twin Block Caliper is only 2400g. 

3. Different diametric opposed 4 pots enable significant results:

a) delicate braking and control

b) dramatic improvements in tire grounding and steer due to weight reduction under the spring

c) greatly reduce the burden on brakes, tires, etc. 

4. A large diameter brake rotor (45251 - 4H1014) is required to install on a vehicle with a genuine rotor of 282 mm or less. 

5. Large diameter brake rotor (45251-4H1014) and inner spacer (45250 - T03AL) are required for EG6

6. Compatible models:

EG6, EK4 Zenki, EK4 Kouki, EK9 Zenki, EK9 Kouki, DC2 Type R'96Spec, DC2 Type R'98Spec, DB8 Type R'96Spec, DB8 Type R'98Spec, GE8RS Zenki, GE8 Zenki, GE8RS Kouki, GE8 Kouki, DBA-GK5

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

 

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

1. This is Spoon brake rotor for Honda Civic.

2. Compatible models: EG6, EK4 Zenki, EK4 Kouki, DC2 Type R'96Spec, DB8 Type R'96Spec, GE8RS Zenki, GE8 Zenki, GE8RS Kouki, GE8 Kouki, DBA-GK5

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

 

P2M Outer Tie Rods for Scion FR-S & Subaru BRZ P2-P0TRI086-HC

1. P2M pro outer tie rods for Subaru BRZ / Scion FR-S.  

2. Made from S45C steel tubing with 3pc teflon pillow ball.

3. The outer tie rod is made to accommodate your stock inner tie rods with an upgrade bump steer adjust-ability.

P2M Outer Tie Rods for Scion FR-S & Subaru BRZ P2-P0TRI086-HC

 

SPC Performance 98-05 Lexus GS300/98-00 GS400/01-05 GS430 Rear Camber Adjustment Kit SPC67510

1. SPC Performance camber bolts will help you to achieve the proper front or rear alignment.

2. They are made of high-quality materials and are designed to be installed with only slight modification to the rear lower control arm.

3.  Fit well and these are great for lowered GS's looking to be able to properly adjust camber.

SPC Performance 98-05 Lexus GS300/98-00 GS400/01-05 GS430 Rear Camber Adjustment Kit SPC67510

 

aFe Magnum FORCE Cold Air Intake System for Porsche 911 Carrera (997) 09-12 H6-3.6L afe54-83038R

1. Introducing the Magnum FORCE Stage-2Si Cold Air Intake System w/ Pro 5R Media Porsche 911 Carrera (997) 09-12 H6-3.6L

2. This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. 

3. Its progressive layering allows the filter to flow at high levels even when dirty. 

4. This media is perfect for street and/or track use. 

5. Pro 5R filters are easily recharged with aFe's POWER CLEANER and blue air filter oil.

aFe Magnum FORCE Cold Air Intake System for Porsche 911 Carrera (997) 09-12 H6-3.6L afe54-83038R