Flowtech 18-21 Mustang Gt Axle-Back Quad Tip Exhaust System Kit - 52018FLT FLO-152018FLT

1. This Flowtech Axle-back exhaust system uses mandrel bent 2.50' diameter 409SS stainless steel for strength, durability and performance. 

2. The high-flow straight through mufflers offer a deep, aggressive exhaust tone. 

3. The system has 3.50' polished 304SS stainless steel quad exhaust tips and uses the OEM mounting points for a factory-like fitment.

4. Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

Flowtech 18-21 Mustang Gt Axle-Back Quad Tip Exhaust System Kit - 52018FLT FLO-152018FLT

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

 

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

1. The purpose of this twin block caliper is to reduce the weight of the unsprung mass. 

2. A genuine caliper weight for one piece is 5200g BUT Twin Block Caliper is only 2400g. 

3. Different diametric opposed 4 pots enable significant results:

a) delicate braking and control

b) dramatic improvements in tire grounding and steer due to weight reduction under the spring

c) greatly reduce the burden on brakes, tires, etc. 

4. A large diameter brake rotor (45251 - 4H1014) is required to install on a vehicle with a genuine rotor of 282 mm or less. 

5. Large diameter brake rotor (45251-4H1014) and inner spacer (45250 - T03AL) are required for EG6

6. Compatible models:

EG6, EK4 Zenki, EK4 Kouki, EK9 Zenki, EK9 Kouki, DC2 Type R'96Spec, DC2 Type R'98Spec, DB8 Type R'96Spec, DB8 Type R'98Spec, GE8RS Zenki, GE8 Zenki, GE8RS Kouki, GE8 Kouki, DBA-GK5

SPOON TWIN BLOCK CALIPER KIT FOR HONDA CIVIC EG6 EK4 EK9 45020-DCR-G00

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

 

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

1. This is Spoon brake rotor for Honda Civic.

2. Compatible models: EG6, EK4 Zenki, EK4 Kouki, DC2 Type R'96Spec, DB8 Type R'96Spec, GE8RS Zenki, GE8 Zenki, GE8RS Kouki, GE8 Kouki, DBA-GK5

SPOON FRONT BRAKE ROTOR FOR HONDA CIVIC EG6 EK4 45251-4H1014

 

P2M Outer Tie Rods for Scion FR-S & Subaru BRZ P2-P0TRI086-HC

1. P2M pro outer tie rods for Subaru BRZ / Scion FR-S.  

2. Made from S45C steel tubing with 3pc teflon pillow ball.

3. The outer tie rod is made to accommodate your stock inner tie rods with an upgrade bump steer adjust-ability.

P2M Outer Tie Rods for Scion FR-S & Subaru BRZ P2-P0TRI086-HC

 

SPC Performance 98-05 Lexus GS300/98-00 GS400/01-05 GS430 Rear Camber Adjustment Kit SPC67510

1. SPC Performance camber bolts will help you to achieve the proper front or rear alignment.

2. They are made of high-quality materials and are designed to be installed with only slight modification to the rear lower control arm.

3.  Fit well and these are great for lowered GS's looking to be able to properly adjust camber.

SPC Performance 98-05 Lexus GS300/98-00 GS400/01-05 GS430 Rear Camber Adjustment Kit SPC67510

 

aFe Magnum FORCE Cold Air Intake System for Porsche 911 Carrera (997) 09-12 H6-3.6L afe54-83038R

1. Introducing the Magnum FORCE Stage-2Si Cold Air Intake System w/ Pro 5R Media Porsche 911 Carrera (997) 09-12 H6-3.6L

2. This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. 

3. Its progressive layering allows the filter to flow at high levels even when dirty. 

4. This media is perfect for street and/or track use. 

5. Pro 5R filters are easily recharged with aFe's POWER CLEANER and blue air filter oil.

aFe Magnum FORCE Cold Air Intake System for Porsche 911 Carrera (997) 09-12 H6-3.6L afe54-83038R

 

GKTech Aero Mirrors for Nissan 350Z G35 LHD G35X-MIRRL

1. Aero mirrors that to suit the Infiniti G35. 

2. These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes. 

3. Manufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint. 

4. Vehicle Compatibility:
- Infiniti G35 (Coupe only)
- Nissan 350Z 

5. To suit LHD vehicles.

6. NOTE: To fit 350Z the mounting point must be re drilled, this requires you to drill new holes. These are NOT a direct fit without re drilling. 

GKTech Aero Mirrors for Nissan 350Z G35 LHD G35X-MIRRL

 

Stillen Y-Pipe 03-09 350Z / 03-07 G35 Coupe (For Single Path, Stock Etc) **Not For Awd/Nismo** stln504252

1. The all new STILLEN Y-pipe is constructed of 2 1/2" pipe up to 3" on the collector and is made of stainless steel. 

2. This mandrel bent pipe allows for smooth flow of gasses without restriction, bringing the increase of performance to 7 horsepower with an additional 3lbs of torque to your 350Z or G35 Coupe.

3. Total of 10 HP are gain when used with the STILLEN Silver Series Y-Pipe Back Exhaust System.

Stillen Y-Pipe 03-09 350Z / 03-07 G35 Coupe (For Single Path, Stock Etc) **Not For Awd/Nismo** stln504252

 

DeatschWerks 01-05 Lexus IS300 2JZ-GE 700CC Injectors dwk22S-03-0700-6

1. Good injectors will give quicker and sharper throttle response.

2. DeatschWerks 01-05 Lexus IS300 2JZ-GE 700CC Injectors will improve the combustion efficiency.

3. This is a Set of 6 700cc Injectors for Lexus IS300 2JZ-GE 01-05

4. Connector Shape: Sumitomo
-Flow Rate: 700 cc/min
-Number of Injectors: 6

DeatschWerks 01-05 Lexus IS300 2JZ-GE 700CC Injectors dwk22S-03-0700-6

ISR Performance Single GT Exhaust for 350Z IS-GT-350Z

• This 350Z Y-pipe back exhaust provides a deep and aggressive tone—not for the faint of heart
• Precision TIG welded Stainless Steel with brushed finish for maximum eye appeal
• Polished tip and muffler
• Lighter than OEM exhaust for improved performance
• Full 3-inch exhaust with 4.5-inch tip
• Note: Only works with Nissan 350z (03-08) 
• ONLY FITS 350Z. This WILL NOT FIT THE G35

350z Y-Pipe Back Exhaust

1. A wide, 3-inch pipe gives you reduced back pressure for more horsepower, while the full stainless steel construction with highly polished muffler and tip.

2. A 350Z Y-pipe back exhaust from ISR Performance Racing is a premium aftermarket upgrade. 

3. You need to check the fit of all parts before installation. Depending on your current equipment, some customization may be necessary. 

4. If you are unsure of the proper use or installation of this kit, consult a trained professional.

ISR Performance Single GT Exhaust for 350Z IS-GT-350Z

 

 

Battle Version FRONT UPPER CONTROL ARMS for LEXUS SC300/SC400 91-00 Z30 BV-LEX-FC-FUCA

1. Newly added to the Battle Version product line up, the SC300/SC400 FUCAs are designed to allow adjustments to front camber for more precise alignment. 

2. They were hand make and assemble every arm. 

3. The use of our 3- piece self lubricating Teflon injected rod ends will ensure maximum durability and long life in extreme use.

Battle Version FRONT UPPER CONTROL ARMS for LEXUS SC300/SC400 91-00 Z30 BV-LEX-FC-FUCA

 

Battle Version REAR CAMBER LINKS for BMW E36 BV-BMW-E36-RCAM

1. Get the correct angle you need for the track or on the street. 

2. These arms will help you adjust the camber you need for the track. 

3. Hand assembled and track ready.

4. These links use aircraft grade billet aluminum and contain Self-Lubricating Teflon injected bearings to handle the rigors of repeated track use.

Battle Version REAR CAMBER LINKS for BMW E36 BV-BMW-E36-RCAM

SPOON FRONT SUBFRAME RIGID COLLAR FOR BMW 320I,325I,330I,335I (50261-E87-000)

 

SPOON FRONT SUBFRAME RIGID COLLAR FOR BMW 320I,325I,330I,335I (50261-E87-000)

1. Rigid Collar is a specially designed part made from tempered aluminum. 

2. It is inserted between the body and subframe by lifting up the vehicle, loosening the joint bolts one by one, then tightening them back together. 3. The tapered portion of Rigid Collar deforms as the bolt is tightened, filling the gap between the bolt and the inner wall of the bolt hole.

4. Effects:
(1) Reduction of annoying vibration and shaking that occurs when the engine is started.
(2) Decrease in vibration will mean reduction in cabin noise.
(3) Better straight-running stability, docile rolling, and reduced corrective steering.
(4) Improved straight line stability, compliant roll characteristics and reduced amount of steering corrections.
(5) Smooth overall driving feel reduces fatigue on long drives.

SPOON FRONT SUBFRAME RIGID COLLAR FOR BMW 320I,325I,330I,335I (50261-E87-000)

 

NISMO Thermostat - SR/KA 21200-RS520

1. This is a NISMO cold temp thermostat for KA24DE and SR20DET. 

2. Very good upgrade for roadracers, where the Nismo units opens at 67 deg celsius compared to factory 76.5 deg celsius.

3. This excellence NISMO thermostat will cool down your motor before heat build up. 

4. This is a Nissan Motorsports component, intended for off-road, race use only. As such, it comes with no manufacturer warranty of any type whatsoever. 

NISMO Thermostat - SR/KA 21200-RS520

 

Audi & Volkswagen APR K04-64 Turbo System - 2.0T Longitudinal - B7, B8 and B8.5 A4/A5 T2100009

1. The APR K04 Turbocharger System is the leading turbo upgrade system that dramatically increases power. 

2. This upgrade kit with software will deliver power similar to a heavily tuned Golf R, S3, TT-S and other high end vehicles, as the K04 comes standard on those vehicles. 

3. Transient response is lightning fast with minimal lag. 

4. Power comes on quick and stays strong through the entire power band. 

5. The best is the system is designed as a budget upgrade compared to larger turbocharger systems. Only requires minimal hardware, most of which is available to APR Stage 2 customers. 

6. Turbocharger: APR uses Genuine Borg Warner components. The heart of the system is a Borg Warner K04-64. 

7. The CNC-machined billet compressor wheel and stainless steel exhaust manifold are a substantial leap in technology, performance and reliability over the factory unit. 

8. Unlike the off the shelf K04-64 unit, APR's unit is customized. The DV was integrated into the compressor cover, just like the factory turbo it replaces. In doing so, clutter and complexity is removed. 

9. The DV that mounts to the turbo will eliminate several potential boost leak points. It's a simple and clean install. 

10. With many thousands of these units sold for more than a decade, it is truly confident to say these turbos are powerful and reliable. 

11. Install hardware: All gaskets, nuts, bolts, washers, studs and one time use clamps are included with this upgrade, making install as headache free as possible. 

12. Software: APR's Stage 3 K04 ECU Upgrade is included with this purchase. You need to visit applicable vehicle ECU upgrade page for more information about the software, including recommended and required hardware, power figures and other details.

13. Please note, software compatibility must be checked before purchase. 

14. This system fits multiple vehicles and engines with different requirements. All are designed for use with an upgraded intake, intercooler, race DP and NGK BKR8EIX spark plugs gapped to 0.024" ±0.002" or 0.6mm ±0.05mm with a change interval of 10-15,000 miles or 16-24,000 km. 

15. The A4 B7 (EA113) additionally requires injectors (MS100041 or 06F 906 036 F), a HPFP and may require an upgraded rail valve (Z1001952) as some factory parts wear over time. 

16. This system may require transmission and engine internal upgrades.

APR K04-64 Turbo System - 2.0T Longitudinal - B7, B8 and B8.5 A4/A5 T2100009