Garrett PowerMax Turbocharger 14-18 VW / Audi 2.0L TSI MK7 Stage 2 Upgrade Kit grt898200-5001W

 

Garrett PowerMax Turbocharger 14-18 VW / Audi 2.0L TSI MK7 Stage 2 Upgrade Kit grt898200-5001W

1. This is Stage 2 Turbocharger Part Number: 898200-5001W that supports up to 600 BHP (447kW)

2. Garrett PowerMax turbocharger upgrades for the Volkswagen and Audi MK7 2.0L TSI engine platform is engineered to increase engine performance while maintaining OEM installation specifications. 

3. Stage 1 (485 HP*) and Stage 2 (600 HP*) upgrades maximize efficiency and air flow compared to the OEM turbocharger. 

4. High temperature, Mar-M alloy turbine wheel and twin scroll stainless steel turbine housings are rated for up to 1050° C. 

5. These turbochargers are fully assembled with a calibrated electronic actuator and ancillary components for direct OEM fitment.

6. Stage 2 Features:
• Direct-Fit Stage 2 Upgrade
• 600HP | 447kW (flywheel) power capability (on-vehicle results)
• 54mm compressor inducer, 67mm compressor exducer
• 54mm turbine inducer, 49mm turbine exducer
• G25-660 turbocharger
• Audi A3, S3, TT, TTS
• VW Golf Base, AllTrack, GTI and R
• Complete assembly with calibrated electric actuator and ancillary components for OE fitment
• +59% flow compared to IS38 turbo (stock Golf R)
• G-Series compressor wheel aerodynamics for maximum horsepower
• G-Series turbine wheel aerodynamics constructed of Mar-M alloy rated for up to 1050C
• Stainless steel turbine housing rated for up to 1050C
• Fully machined speed sensor port
• Ball-bearing

7. WARNING: Maximum allowable turbocharger speed is 185krpm (Stage 1) | 165krpm (Stage 2). 

8. The use of this product above max turbocharger speed is at the owner’s risk, and can result in damage and premature failure. 

9. To protect the turbocharger from overspeed when operating, a speed sensor port is machined into the compressor housing for the fitment of speed sensor part numbers 781328-0003 (includes sensor and gauge), and 781328-0004 (includes speed sensor). Speed sensors sold separately.

10. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. 

11. The target power has been calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel power.

12. Application Data
Make Model Year Body & Trim Engine OEM Turbo
-Audi TT 2014 + Base 2.0L L4 – Gas IS20
-Audi TTS 2014 + Base 2.0L L4 – Gas IS38
-Audi A3 2015 – 2018 Premium, Premium Plus, Prestige 2.0L L4 – Gas IS20
-Audi A3 Quattro 2015 – 2018 Premium, Premium Plus, Prestige 2.0L L4 – Gas IS20
-Audi S3 2015 – 2018 Premium, Plus, Prestige 2.0L L4 – Gas IS38
-VW Golf 2015 S, SE, SEL, Launch Edition 2.0L L4 – Gas IS12
-VW Golf GTI 2015 Autobahn, S, SE 2.0L L4 – Gas IS20
-VW Golf R 2015 Base 2.0L L4 – Gas IS38
-VW Golf 2016 Base, S, SE, SEL 2.0L L4 – Gas IS12
-VW Golf GTI 2016 Autobahn, S, SE 2.0L L4 – Gas IS20
-VW Golf R 2016 Base 2.0L L4 – Gas IS38
-VW Golf 2017 S, Wolfsburg Edition 2.0L L4 – Gas IS12
-VW Golf Alltrack 2017 S, SE, SEL 2.0L L4 – Gas IS12
-VW Golf GTI 2017 Autobahn, S, SE 2.0L L4 – Gas IS20
-VW Golf R 2017 Base 2.0L L4 – Gas IS38
Audi Golf 2018 S, SE, SEL 2.0L L4 – Gas IS12
-Audi Golf Alltrack 2018 S, SE, SEL 2.0L L4 – Gas IS12
-Audi Golf GTI 2018 Autobahn, S, SE 2.0L L4 – Gas IS20
Audi Golf R 2018 Base 2.0L L4 – Gas IS38

Garrett PowerMax Turbocharger 14-18 VW / Audi 2.0L TSI MK7 Stage 2 Upgrade Kit grt898200-5001W

 

AWE Touring Edition Cat-Back Exhaust for Subaru BRZ Toyota GR86 Toyota 86 awe3015-32486

1. This AWE Touring Edition Catback for Subaru BRZ Toyota 86 will surface up a deep BOXER tone.

2. Touring Edition features AWE’s patented drone-canceling solution, 180 Technology

3. The 5” double-walled, slash-cut available in chrome silver or diamond black

4. Handcrafted from 3” & 2.5” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel

5. Direct bolt-on for factory-like simplicity

6. Weight savings over stock of 1 lb for this Touring Edition

7. Conversion Kits available - easily switch between edition

8. Less is more: clean, straight-through design maximizes flow

9. Perfect fitment, guaranteed

10. AWE No Check Engine Light guarantee

11. Lifetime warranty

AWE Touring Edition Cat-Back Exhaust for Subaru BRZ Toyota GR86 Toyota 86 awe3015-32486

 

PRL Motorsports 2021+ Acura TLX Type-S Intercooler Upgrade Kit (Black) PRL-ATXL2-30T-IC-BLK

1. Fits all 2021 Acura TLX Type-S 3.0T
Fits all variant models including RHD, International Models etc.

2. Important Notes:
• NO ECU CALIBRATION REQUIRED
• COMPATIBLE WITH FACTORY CHARGE PIPING
• PAIR w/ CHARGE PIPE UPGRADE KIT FOR OPTIMAL PERFORMANCE

3. Acura's Turbo TLX is extremely susceptible to heat-soak, especially when retaining the factory intercooler. 

4. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. 

5. These issues become even more prevalent with spirited driving and/ or increased power outputs. 

6. The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 28 x 5 x 6.375" 650+ horsepower rated bar-and-plate core. 

7. PRL intercooler core increases surface area by 54% and internal flow by 91% to allow optimal cooling and airflow. 

8. Billet machined aluminum end tanks maximize efficiency while looking as smooth as they flow. This intercooler utilizes factory mounting spots with billet machined end tanks. 

9. To maintain consistency with most of PRL product line, no cutting, fitting or trimming is required.

10. Kit Includes:
• (1) Intercooler Assembly w/ Billet End Tanks
• (2) 304 Stainless Steel Worm Drive Hose Clamp
• (1) Cardboard "PRL" Logo Stencil

PRL Motorsports 2021+ Acura TLX Type-S Intercooler Upgrade Kit (Black) PRL-ATXL2-30T-IC-BLK

 

HKS Mazda RX-8 Legamax Exhaust System hks32018-AZ002

32018-AZ002 MAZDA RX-8 2004-2006

1. HKS is proud to introduce the all new HKS Legamax Exhaust for the 2004 Mazda RX-8. 

2. The Legamax is the newest exhaust line from HKS and utilizes the latest in exhaust technology, including HKS' patented Advantex muffler packing.

3. The HKS Mazda RX-8 Legamax Exhaust Features:

- 100% Polished SUS304 Stainless Steel Piping, 

- Mufflers and Tips 65mm Piping Diameter Dual 100mm LM-1 Exhaust Tips Advantex 

- Muffler Packing 95dB(A) Sound Compliant

HKS Mazda RX-8 Legamax Exhaust System hks32018-AZ002

 

Scotidi Quick Angle Kit for Ford Mustang 05-10 009-006-0462

100% BOLT ON, NO DRILLING REQUIRED!

1. A seriously capable kit for a seriously good price, the Scotidi Quick Angle kit takes the new approach to drifting suspension parts. 

2. It may seem that a full custom spindle and control arm setup is the only way to get a high performing kit, but the quick angle kits have proven otherwise. 

3. The bolt on spindle adapters provide the same benefits that a standalone spindle would at a fraction of the price and allows you to keep more easily replaceable parts on your car.

4. This kit offers:

• a verifiable 62° of steering angle

• 3 position ackerman adjustment

• roll center correction

• PTFE lined rod end joints for more steering feel and to eliminate the squirm of rubber bushings

• Stock spindle trail correction

• Version 2.0 now has 1 piece arms! While the 2 piece arms added on car adjustment, they proved to be finicky and less robust. Not to mention the 1 piece arms are stronger, simpler, and less expensive!

5. This kit includes:

Spindle Adapters

• 1.625" Roll center correction

• 3 position ackerman adjustment 

• Optimized steering arm length to maximize angle

• BIllet Aluminum construction

• Steering stop plates that bolt on to the factory spindle

6. Control Arms

• Double shear rear mount

• Integrated steering stop

• Minimum 2" over factory arm length 

Extended Tie Rods

• Extended length for drift applications

• PTFE lined rod ends

(The selection of model year is based upon the ball joint size. If you are unsure of which model year or ball joint/spindle combination you have, you can measure the diameter of the ball joint shaft or the mating hole. The 05-10 will have a ~.705” diameter ball joint and the 11-14 will have a .750”.)

*Requires coil over kit

* NOT DOT APPROVED, TRACK USE ONLY!

Scotidi Quick Angle Kit for Ford Mustang 05-10 009-006-0462

 

Brian Crower Camshafts for Subaru WRX '02-'05

The intention of having a longer duration profile camshaft is to have the optimum volume and higher combustion magnitude.

The intense the combustion, then the more power the engine will deliver. 

This is an exceptional horsepower improvement camshaft from Brian Crower for Subaru WRX.

Stage 2 Specification
1. Plug and play application. 

2. Short duration for nice street manners, slight lope at idle. 

3. Excellent all purpose spec. OEM spring OK.
Adv. Dur. - 272°/272°
Dur @ .050 - 222°/222°
Lift (in) - .400"/.400"
Lift (mm) - 10.16/10.16

Stage 3 Specification
1. Longer duration profile, added rpm potential. 

2. Intended for fully built engine. 

3. Tuning and ECU mods recommended. Requires kit BC0600. 
Adv. Dur. - 280°/280°
Dur @ .050 - 234°/234°
Lift (in) - .425"/.425"
Lift (mm) - 10.80/10.80 

Brian Crower Camshafts for Subaru WRX '02-'05

 

Greddy Supreme SP Axle Back Exhaust System - 2016+ Mazda Miata MX-5 gre10148207

The GReddy Supreme SP exhaust system for the 4th generation ND Mazda MX-5 Miata is designed to enhance both performance and sound for the USA-spec 2.0-liter Skyactiv-G engine. 

Here’s a breakdown of its key features:

1. Two Configurations Available:

• Pre-Resonated Axle-Back System: Optimized for sound control while maintaining enhanced exhaust flow.

• Full System: Includes a dual-resonated mid-pipe for additional performance gains and a sportier exhaust note.

2. Performance Gains:

• The full system delivers noticeable power increases throughout the RPM range.

• Achieves maximum gains of 13hp and 8 ft-lbs of torque as early as 3,500 RPM.

3. Unique Rear Design:

• Both configurations feature a distinctive rear section with dual 82mm GReddy exhaust tips, offering a clean, aggressive look.

4. Durability and Warranty:

• Constructed from fully hand-welded 304 stainless steel for long-term durability.

• Backed by GReddy’s Limited Lifetime Warranty for peace of mind.

The GReddy Supreme SP is an excellent upgrade for Mazda MX-5 Miata owners seeking improved horsepower, an engaging sound profile, and quality craftsmanship. 

Whether you prioritize maximum sound control or a complete performance boost, this system delivers on all fronts.

Greddy Supreme SP Axle Back Exhaust System - 2016+ Mazda Miata MX-5 gre10148207

 

BLOX Racing 03-06 Mitsubishi Evo 8/9 Big Tube Turbo Exhaust Manifold bloBXEX-30115

1. This T304 stainless steel, tubular manifold is designed to replace the OEM cast, log manifold.

2. BLOX Big Tube manifold features larger diameter tubing and longer runners that provide increased volume and efficiency. 

3. It is designed to fit within the stock frame and accommodates the OEM turbo up to the largest, modified stock frame offerings.

4. Can fit FP Zero Turbo and supports over 700whp. This is an excellence horsepower improvement exhaust manifold from BLOX.

5. TURBO MANIFOLD SPECS

• T304 Stainless Steel; Schedule 40
• 42mm Mandrel-Bent Tubing; TIG-Welded
• Fits Within Stock Frame
  
• Also fits EVO VII

BLOX Racing 03-06 Mitsubishi Evo 8/9 Big Tube Turbo Exhaust Manifold bloBXEX-30115

 

Pagid BMW M3 M5 Z4 Z8 RSL29 Rear Brake Pads PAG-2685-RSL29

1. An excellence Pair of Rear brake pads for BMW M3,M5,Z4 M, Maserati BiTurbo 2.5 & 2.8. Can fit multiple other BMW & Maserati models. 

2. Truly Racing oriented and built to withstand high temperatures. Fitment list as per below.

3. RSL29 COMPOUND OVERVIEW

The Pagid RSL29 compound, formerly known as Pagid RS29 is an excellence long time favorite and reliable pad. 

It features a very good modulation and release characteristics through a low metallic resin bonded material containing steel and aramid fibers. 

The friction level of the material maintains constant at a low-medium level. 

Combined with easy bedding-in behavior, this compound is very popular in club racing for track days, GT cars, touring cars and prototype endurance racing. 

Due to the excellent modulation characteristics, the RSL29 pads is also often used in sprint races.

4. MODEL COMPATIBILITY

BMW	330i [E46]	2000 2005	Rear
BMW	850 [E31]	1990 - 1999	Rear
BMW	M3 [E46] & M3 CSL	2000 - 2007	Rear
BMW	M5 [E39]	1998 - 2003	Rear
BMW	Z4 M Coupe	2006 - 2009	Rear
BMW	Z8 4.9	2000 - 2003	Rear
Maserati	BiTurbo 2.5 & 2.8	1994 - 1999

Pagid BMW M3 M5 Z4 Z8 RSL29 Rear Brake Pads PAG-2685-RSL29

 

Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

1. Improve your braking system with Project Mu's high quality bolt on brake cooling duct for the Scion FR-S and Subaru BRZ. 

2. The additional cooling will significantly reduce brake fade and rotor wear. 

3. These are direct fit behind the rotors and the 2” inlets can be connected to scoops or to vents in your bumper. 

4. Sold as a pair for front brakes only. 

*Note* Cooling hoses are not included. 

Project Mu Brake Cooling Ducts for Scion FR-S & Subaru BRZ PACCBC01A

SuperPro Rear Lower Control Arm Bushings - Lexus IS300 SPF3036K

1. Control arm bushes will stabilise the movement of the arms. This will ensure the correct geometry is maintained in all situations.

2. Worn rubber bushes in these locations lead to dynamic changes in wheel alignment. This will effect the handling of a vehicle and shorten tyre life.

3. SuperPro Bushings solved this issue with an excellence material and are perfect for repair or upgrading.

4. WARRANTY: Lifetime

Fitment:
LEXUS
GS 1997-2000 - S160
GS 2000-2005 - S160
IS 1999-2005 - XE10
SC 1991-2000 - Z30

TOYOTA
ALTEZZA GXE10 - 1999-2005
ARISTO 1997-2000 - _S16_
ARISTO 2000-2005 - _S16_

SuperPro Rear Lower Control Arm Bushings - Lexus IS300 SPF3036K

 

Exedy OE Replacement Clutch Kit for Mazda Miata 2006-2014 exeMZK1006

1. This is Exedy OE Replacement Clutch Kit (Mazda Miata 2006-2014) 

2. Kit Contents : 
Pressure Plate
Clutch Disc
Throw-Out Bearing
Alignment Tool
Pilot Bearing

Exedy OE Replacement Clutch Kit for Mazda Miata 2006-2014 exeMZK1006

 

DINAN N54 TURBO INSTALLATION HARDWARE KIT - 2007-2016 BMW 135I 335I 1M Z4 D313-0010

1. This is DINAN N54 TURBO INSTALLATION HARDWARE KIT  for 2007-2016 BMW 135I/335I/1M/Z4
E82/E88/E89/E90/E92/E93

2. This kit contains OEM parts that include gaskets and hardware that must be replaced during turbocharger installation.

DINAN N54 TURBO INSTALLATION HARDWARE KIT - 2007-2016 BMW 135I 335I 1M Z4 D313-0010