J'S RACING AERO BONNET TYPE-V FRP FOR HONDA CIVIC FK7 ABV-K7-F
Material: CFRP / FRP
The high-performance aero bonnet developed for the Civic TYPE-R FK8 is finally available for the FK7.
The high-performance aero bonnet developed for the Civic TYPE-R FK8 is finally available for the FK7.
V-shaped ducts and main ducts installed on the left and right side of the heat generated by the L15B engine and turbine generate negative pressure, making it possible to exhaust heat with high efficiency.
Due to the heat exhaust effect from the total area of the ducts, approximately 150cm2, the engine's potential is brought out to 100%.
lowering not only water and oil temperatures, but also intake air temperature, correcting heat sag and high water temperature during sports driving such as on the street as well as on the circuit.
A single piece of carbon cloth is pasted together using skillful craftsmanship techniques to create a high-quality finish.
Compatible with the genuine bonnet catch, so it can be installed by bolting on.
By reducing the weight of the original bonnet to 7.2kg from 9.5kg, it exhibits even better cornering performance.
Can be used for a wide range of purposes, from street to circuit use. *Separate genuine parts are required for installation*
Please be sure to prepare the following genuine parts before installation:
* 76879-TGH-A01 Tube (620MM) ×1 76830-TGG-E01 Joint Y,
tube × 1 76877-TGH-A01 Tube (240MM) ×2 76810-TGH-A01 Nozzle ASSY.,
Front windshield washer x 2 76829-ST3-E01 Joint,
rear watch tube x 1 90652-S2A-003 Clip, tube 7MM (black) ×3 91501-TLA-A01 Clip,
tube 7MM (black) ×1 76838-SZA-A30 Clip, watch tube x 2 76878-TGH-A01 Tube (540MM) ×1
No comments:
Post a Comment